How do I attach my house number to the facade?

First, you will need the necessary equipment to install your house number. This includes screws or nails, a cordless drill or hammer, and, depending on the material of your façade, suitable wall plugs.

The steps you should follow are listed below:

• Carefully measure the position of your house number to ensure it is centered and clearly visible. Use a measuring tape or folding rule for this.
• Mark the planned holes with a pencil to avoid mistakes.
• Check whether the measured spot is suitable for installation. If you might encounter a water pipe or electrical line, choose a different location.
• Drill the holes using the appropriate bit for your façade. Use wall plugs if the material of your façade requires it.
• Now attach the house number and secure it carefully with screws or nails.
• Finally, check that the house number is firmly in place and clearly visible.

Please note that the specific steps may vary depending on the material of your house number and façade. For special material combinations, such as glass on stone, it is advisable to consult a professional.