How do I install a door stop?

Door holders can be used to keep your door in the open position, eliminating the need to block it. This is especially practical in high-traffic areas. Installing a door holder is a relatively simple process that you can also do yourself. Below you can see the steps you need to follow:

• First, you need to decide where on the door the door holder should be attached. Ideally, this should be at a height that is comfortable for you.
• Take the base of the door holder and position it where it is to be installed. Mark the positions of the screw holes with a pencil.
• Using a drill, now drill the marked spots on the door and the wall. Make sure to use the correct drill bit.
• After drilling the holes, insert wall plugs into the holes in the wall.
• Then you can attach the base to the door and the bracket to the wall. Use the included screws and tighten them.
• Finally, check the function of the door holder by opening the door and operating the holder.

Now your door holder should be correctly installed and ready to use. Please be careful when drilling into the door and wall to avoid damage.