How do I install a glass door handle myself?

To independently install a glass door handle, you need a step-by-step guide that you should follow carefully to avoid possible mistakes.

First, you will need the following tools:

After preparing this equipment, you can now begin the installation process:

1. Measure the exact center of the door and mark the point where you want to attach the handle. Use the measuring tape and marker for this.
2. Make sure the handle is placed at the desired position on the marked line. You can use the spirit level to check whether the handle is straight.
3. Carefully drill holes in the door at the points marked on the handle. Make sure the drill holes are the correct size for the screws of the handle.
4. Push the screws through the holes in the handle and screw them on from the other side of the door.
5. Make sure the handle is firmly seated and properly aligned. If necessary, you can tighten the screws.

Congratulations, you have successfully installed a glass door handle yourself.