How do I install a strike plate?

Installing a strike plate is an important part of fitting a new door or replacing a door lock. Here are step-by-step instructions on how to install a strike plate:

• Step 1: Determine the position – To determine the position of the strike plate, close the door and mark where the latch meets the door frame.
• Step 2: Draw the outline – Take the strike plate and hold it against the marked area on the frame. Trace the outline of the strike plate onto the frame.
• Step 3: Cut out – Using a chisel and a hammer, remove the area within the outlined shape. Make sure the recess is deep enough so that the strike plate sits flat and is flush with the door frame.
• Step 4: Installation – Place the strike plate in the cut-out area and secure it with the supplied screws. Make sure the screws are tight and the strike plate is firmly attached.
• Step 5: Check – Close the door to make sure the latch engages in the strike plate. If the door does not close properly, you may need to adjust the position of the strike plate.

Remember to always ensure your safety and use the right tools to get your DIY project started.