How do I properly install a security escutcheon on my door?

First, you will need tools such as a screwdriver, a drill, and possibly wall plugs and screws for installing a security escutcheon (depending on your security fitting and your door).

Follow these steps for installation:

• First, remove the existing door handle or door knob. This is usually done by loosening the screws on the inside of the door.
• After removing the handle, place the security escutcheon on the outside of the door. Make sure that the keyhole and other features of the fitting align with the corresponding parts on the door.
• Carefully mark the points on the door where you need to drill slotted holes or through holes. Use the template that is usually supplied with the security escutcheon.
• Remove the security escutcheon and drill the holes for the fixing screws. Make sure you use the correct drill bit size and drill straight.
• Put the security escutcheon back onto the door and screw it tightly in place. Make sure the fitting is secure and does not wobble.

Once the fitting is installed, you can reattach the door handle or door knob. Please note that there may be some differences depending on the model of the security escutcheon and the door. Therefore, always read the instructions supplied with the product carefully.