How do I properly install a shower door seal?

Installing a shower door seal is a relatively simple process that you can do yourself. Here is a step-by-step guide on how to do it properly:

• Start by removing the old seal. In most cases, it can simply be pulled off or cut off with scissors. Make sure to remove all residue and keep the surface clean.
• Now measure the length of the shower door. You should have the exact length to achieve the perfect fit for your seal. Cut the seal to the appropriate length with scissors.
• Now it is time to install the seal. The seal should be attached to the bottom of the door and on the inside. Press the seal firmly onto the door, starting at one end and working slowly toward the other end.
• Check that the seal is sitting properly by opening and closing the door several times. Make sure the seal is firmly in place and seals the entire door.
• Finally, let the seal rest for a few hours before using the shower. This ensures that the seal is properly bonded and provides good protection.