Alfer wall hook TYPE 8 made of steel up to 40 kg, 100 x 165 mm The Alfer wall hook is the practical solution for space-saving and secure storage of equipment, tools and other items. The sturdy steel equipment holder is galvanized and therefore particularly resistant for use in workshops, garages, basements, sheds or utility rooms. Thanks to its J-shape, a wide variety of equipment can be easily hung up and neatly stored on the wall. The wall hook is screwed directly to the wall and impresses with a load capacity of up to 40 kg. This also makes it suitable for storing heavier items. The red plastic cap ensures better visibility of the hook and at the same time protects hung equipment from scratches and damage. Scope of delivery: 1 piece - wall hook

Blum drive unit SERVO-DRIVE flex Z10C500A.01 The Blum drive unit Z10C500A.01 for SERVO-DRIVE flex enables convenient opening of handleless refrigerators, freezers and dishwashers by simply tapping the furniture front. After tapping, the plunger extends and opens the front. The door then remains in the open position for two seconds, allowing the kitchen user to comfortably reach in and fully open the appliance door. This makes the drive unit ideal for modern handleless kitchens with a high level of operating comfort. The Z10C500A.01 is suitable for all common integrated refrigerators, freezers and dishwashers and can be used with both pull-out and fixed doors. Thanks to its suitability for right-hand and left-hand hinges, the drive unit can be used flexibly in different kitchen situations. For integrated refrigerators and freezers, it is suitable for appliance heights up to 178 cm. Due to the low required niche height of at least 60 mm, the drive unit can also be used where space is limited. A special feature of the drive unit is the integrated release safeguard. It prevents the plunger from extending when no furniture front is in place. In addition, the integrated anti-lean protection prevents the appliance door from opening unintentionally, for example if someone leans against the furniture front. This ensures reliable and safe operation in everyday kitchen use. Installation of the Z10C500A.01 is carried out as a practical plug-in version and is particularly easy. A reference run during initial commissioning is no longer required. The opening hold time can be individually set in three different modes. It is also possible to synchronize two drive units or SERVO-DRIVE switches via the integrated buttons. The radio module is already integrated into the drive unit, eliminating the need for an additional communication cable. For an even larger trigger area, a wireless switch can optionally be used. The drive unit is combined with the standard SERVO-DRIVE components such as power supply unit, cable and node. A QR code directly on the drive unit also provides quick access to the corresponding operating instructions. Scope of delivery: 1 piece - drive unit incl. mounting accessories

Blum drilling jig ECODRILL M31.1000.01The Blum drilling jig ECODRILL M31.1000.01 is the ideal hand tool for precise drilling of the Blum hinge drilling pattern and impresses with simple, fast and comfortable handling. Thanks to its ergonomic and compact design, it is suitable for use both in the workshop and on the construction site and supports efficient processing of a wide range of Blum fittings.The practical one-handed clamping mechanism enables quick fixing of the workpiece and makes the workflow much easier. For maximum flexibility, the ECODRILL offers convenient adjustment of the material thickness as well as precise adjustment of the drilling depth and cup distance. Side stops ensure easy setting of the standard distances or allow processing directly on the marking. The integrated stop angle supports continuous and exact hinge processing.The drilling jig is operated with a standard hand drill and also offers the option of extracting drilling chips directly. This keeps the work area clean and maintains a clear view of the workpiece.With the ECODRILL M31.1000.01, numerous Blum fittings can be processed reliably and precisely. These include CLIP top hinges with BLUMOTION, CLIP top hinges, MODUL hinges as well as the AVENTOS HF and AVENTOS HK-XS flap hinges.Scope of delivery:1 drilling jig2 dowel drills ø 8 mm1 fitting drill Ø 35 mm2 Torx bits2 spacer rings

Blum Opening Angle Limiter 70T3553 for CLIP TOP 110° Cup Hinges to 86° The BLUM CLIP top opening angle limiter is the practical solution for limiting the opening angle of BLUM CLIP top 110° hinges to 86°. Especially for corner cabinets, the opening angle limiter prevents the cabinet door from hitting an adjacent wall when opened, thereby avoiding damage. With the opening angle limiter, controlled and safe door movement can be achieved. This simple solution is ideal when the standard opening of a 110° hinge is too wide and the cabinet door should be prevented from hitting walls or adjacent furniture. Scope of delivery: 1 piece - opening angle limiter

BLUM power supply holder SERVO-DRIVE made of plastic wall mounting, length 211 white grey The Blum power supply holder for Z10NE04EA enables secure and space-saving mounting of the matching Blum power supply on the wall. The holder is specially designed for the Blum power supply Z10NE04EA and is ideal for neat and reliable installation in furniture and installation areas. The screw-on mounting type ensures a stable connection and easy installation. Thanks to the wall-mount design, the power supply can be positioned securely and stored neatly. With a length of 211 mm, the holder offers a precise solution for the intended power supply. The power supply holder is made of robust plastic in white grey and blends unobtrusively into different installation situations thanks to its subtle colour. It is a practical addition for professional and space-saving mounting of the Blum power supply. Scope of delivery: 1 piece - power supply holder

Blum Profile Door Hinge 71B7550D with Blumotion Damping, 125° for Screwing The Blum cup hinge 71B7550D is a high-quality CLIP top BLUMOTION hinge for thick wooden doors and profile doors up to 39 mm. With an opening angle of 125° and the practical zero protrusion, the hinge is particularly suitable for cabinets with internal or pull-out shelves. The design enables space-saving installation and prevents pull-outs from being affected by the hinge when the door is opened. Blum lists model 71B7550D as a 125° hinge with corner application, straight hinge arm and screw-on fixing. The integrated BLUMOTION closing damping ensures a high level of operating comfort. It enables soft and quiet closing of the furniture door and can be deactivated if required. The integrated closing mechanism supports reliable closing of the door. This makes the Blum cup hinge 71B7550D a comfortable damped solution for demanding furniture constructions. The nickel-plated hinge made of zinc die-cast is designed for durable and reliable use. The three-dimensional adjustment option allows precise alignment of the furniture front. Depending on the mounting plate, side adjustment of ±2 mm, height adjustment of ±3 mm and depth adjustment of -2/+3 mm are possible. The cup drilling depth is 11.70 mm. The hinge cup is mounted by screwing. Scope of delivery: 1 piece - cup hinge WITHOUT mounting plate

BLUM SERVO-DRIVE power supply incl. power cable 72W black, Z10NE04EA The Blum power supply Z10NE04EA is the suitable power supply for the Blum drive unit SERVO DRIVE Z10C500A.01. With an operating voltage of 24 volts and an output of 72 watts, this compact power supply ensures a reliable energy supply for the SERVO DRIVE system and is therefore ideal for modern kitchen and furniture applications with electric opening assistance. Thanks to its small space requirement, the Blum power supply can be integrated into furniture constructions in a space-saving way. The 2-meter output cable length offers sufficient flexibility for convenient installation. The power supply is designed for a frequency range of 47 to 63 hertz and is therefore suitable for the corresponding mains operation. The power supply has protection class IP40. This means it is protected against the ingress of solid foreign objects, but not against water. During installation, a suitably protected and dry installation situation should therefore be ensured. Scope of delivery: 1 piece - power supply incl. 2 m power cable

BMB Folding Table Frame FOLDIX T-ECON made of steel The FOLDIX T-ECON folding table frame from BMB combines thoughtful functionality with modern design and is the ideal solution for flexible room concepts. The robust T-shaped steel frame is perfectly suited for table tops from a size of 1200 × 600 mm and provides a stable base for a wide range of applications – from conference and seminar rooms to training areas and multifunctional work environments. Thanks to the practical folding mechanism, the FOLDIX T-ECON can be set up and taken down quickly. Its easy handling enables efficient use of spaces while also ensuring space-saving storage when the tables are not needed. The integrated locking system ensures secure support in both the unfolded and folded positions. The height of the folding table frame can be flexibly adjusted between 710 and 715 mm, allowing comfortable adaptation to individual requirements. With its slim, timeless design, the table frame blends harmoniously into various room concepts and is available in the elegant finishes black and chrome. Scope of delivery: 1 set - folding table frame - NO table top included

Bohle Special Cleaner for UV Bonding, 1000 ml Bohle's special cleaner is the ideal solution for the professional preparation of surfaces before bonding and sealing. Whether glass, metal, ceramic or rubber – the powerful cleaner reliably removes grease, dirt and residues, creating the ideal basis for permanently strong bonds. Especially for UV bonding, for bonds with 2K silicone and for mirror installation with UV adhesive, the special cleaner ensures thorough pre-cleaning and supports secure adhesion of the adhesives. Even stubborn adhesive residues can be removed effectively with the cleaner. This makes the product suitable not only for preparing new bonds, but also for cleaning and reworking tasks in professional glass and metal construction. The easy application saves time and enables clean results in assembly and bonding work. For an optimal cleaning result, apply the special cleaner to the surface to loosen dirt and residues. Then remove them with a new, clean cloth. This keeps the treated surfaces clean, grease-free and perfectly prepared for further processing. Scope of delivery: 1 piece - Special cleaner (1000 ml)

Bohle UV Activator 30 bottle with 9 ml The Bohle UV Activator 30 enables the curing of the UV adhesive B-682-T even without the use of a UV lamp, thereby expanding the range of applications for demanding bonding tasks in glass and metal applications. Especially for bonding metal parts, screen-printed glass, or suitable colored glass, the activator ensures a reliable bond even when UV light cannot reach the bonding area. Metal-to-metal bonds can also be reliably achieved with the activator in combination with the UV adhesive B 682-T. The UV Activator 30 is applied thinly to one of the two parts to be joined and starts curing the adhesive after about 30 seconds. Full final strength is reached after around 24 hours. When used properly, the high bond strength is maintained. This makes the activator ideal for professional applications in glass construction, furniture making, shopfitting, or metalworking. Since the bond slightly yellows when the activator is used, application is recommended primarily for non-visible bonding areas. The activator is sensitive to air and should be carefully resealed immediately after use to ensure optimal product quality. With the Bohle UV Activator 30, you get a practical solution for UV bonding without a UV lamp and create durable, resilient bonds even with difficult material combinations. Scope of delivery: 1 piece - UV activator (9 ml)

Bohle UV adhesive B 682-T bottle with 20 g The Bohle B 682-T UV adhesive is the ideal solution for high-strength glass-to-metal bonds in professional furniture construction. This high-performance adhesive system was specially developed for applications where a permanently durable bond between glass and metal is required. Whether hinges, shelf supports, locks or other fittings - with B 682-T, components can be bonded quickly, precisely and reliably to float glass as well as tempered safety glass (ESG). Thanks to its short curing times, the UV adhesive is ideally suited for efficient production workflows and streamlined manufacturing processes. The adhesive's high impact resistance ensures that dynamic loads and mechanical stresses are reliably absorbed. This results in durable and stable bonds that also impress in demanding furniture and interior construction applications. A particular advantage of Bohle B 682-T is its activator-curing property. This makes it possible to bond even two light-impermeable materials such as metal to metal without the need for a UV lamp. This opens up additional applications in industrial production and assembly. For optimum adhesion on chrome-plated or nickel-plated surfaces as well as on raw aluminium, the use of a metal primer or Pyrosil® is recommended to further improve the adhesive's adhesion. The practical 20 g bottle enables clean and precise dosing and is suitable both for professional use in workshops and for industrial applications. Scope of delivery: 1 piece - UV adhesive (20 g)

Bohle UV adhesive VERIFIX MV 760 for glass bonding, 20 g The MV 760 UV adhesive from Bohle is the ideal solution for demanding glass-to-metal bonding in professional furniture and shopfitting applications. With a content of 20 g and its reliable UV curing, this special adhesive impresses with maximum precision and efficiency during processing. The MV 760 shows its strengths especially in applications such as hinges, shelf supports and handles, ensuring permanently stable bonds with excellent appearance. Thanks to its high strength and pronounced impact resistance, the adhesive is ideally suited for components that are regularly exposed to mechanical stress. Dynamic impact and shock loads, such as those occurring when opening and closing display cabinet doors, are reliably absorbed. This keeps the bonded joint stable and secure in the long term. Another advantage of the MV 760 is its moisture resistance, which makes it particularly interesting for use in humid environments. In combination with Pyrosil, durable and resilient bonds can also be achieved in bathrooms. For optimum adhesion on difficult substrates such as chrome-plated or nickel-plated surfaces as well as raw aluminium, the use of a suitable metal primer or Pyrosil is recommended to significantly improve adhesion. Please note that the MV 760 is not suitable for powder-coated surfaces and cannot be used in combination with a UV activator. Scope of delivery: 1 piece - UV adhesive 20 g

CCE Drop-Down Seal TOP SLIDE for Sliding Doors The TOP SLIDE drop-down seal from CCE was specially developed for use in wooden sliding doors and ensures reliable sealing between the door leaf and the floor. Thanks to the integrated floor rail and the innovative magnetic lock with two magnets, the seal is precisely activated when the door is closed and ensures consistently high sealing performance. This effectively reduces drafts, dust and noise and noticeably improves living comfort. The closing force is adjusted via a retractable, adjustable spring-loaded push button and can be quickly and easily adapted to the respective installation conditions. The high-quality sealing lip made of flame-retardant silicone impresses with its durability, flexibility and reliable function even with frequent use. Installation is carried out by milling into the wooden sliding door. A milling cut of 30 x 18 mm is required for this. The drop-down seal is suitable for a gap between door and floor of at least 5 mm up to a maximum of 15 mm and therefore offers versatile indoor applications. With the TOP SLIDE drop-down seal from CCE, you get a durable and low-maintenance solution for a comfortable, quiet and clean-closing wooden sliding door. The precise workmanship, easy adjustment and robust silicone seal make this sealing system the ideal choice for high-quality sliding doors in private and commercial settings. Scope of delivery: 1 piece - drop-down seal incl. floor rail & magnetic lock & screws

CCE Finger Protection System DIGISAFE made of aluminium 2000 mm The DIGISAFE finger protection profile from CCE is a reliable protection system for swing doors and was developed to secure the dangerous shear and pinch point between the door leaf and frame on the hinge outer side. It prevents fingers from entering the critical area between the door and frame when opening and closing the door. DIGISAFE consists of several aluminium profiles connected to each other by hinges. Thanks to this flexible design, the finger protection system adapts to the movement of the door and allows a door opening angle of up to 180°. At the same time, the internal shear and pinch point between the door and frame is reliably covered. DIGISAFE can be ideally combined with the CCE DIGISMART finger protection profile. While DIGISAFE protects the internal shear and pinch point on the hinge side, DIGISMART complements the finger protection on the opposite side. Together, they create a comprehensive protection system against fingers being trapped on swing doors. Thanks to its robust aluminium construction, DIGISAFE is suitable for use on a wide variety of swing doors. The profiles connected by hinges provide high flexibility while ensuring reliable finger protection across the entire movement range of the door. Scope of delivery: 1 piece - finger protection profile

CCE Finger Protection System DIGISMART made of aluminium 2000 mm The DIGISMART finger protection profile from CCE is a reliable protection system for swing doors and protects the dangerous shear and pinch point between the door leaf and frame on the hinge side. It therefore makes a significant contribution to increasing safety in areas where doors are used frequently and finger trapping is to be prevented. In combination with the DIGISAFE finger protection system, DIGISMART provides comprehensive protection against fingers being trapped in the door. The system is suitable for different types of doors and can be used on wooden doors as well as PVC and aluminium doors. This makes the finger protection profile versatile for various indoor applications. DIGISMART consists of a robust aluminium profile and is available in two models with different dimensions. This allows the finger protection to be selected to suit the respective door situation. The maximum door opening angle is 120°. With the DIGISMART finger protection profile, safety on swing doors can be specifically increased. Especially in combination with DIGISAFE, a continuous protection concept is created for the hinge side of the door and the opposite closing side. Scope of delivery: 1 piece - finger protection profile

Dulimex construction key DX made of plastic for door locks The Dulimex construction key is a practical tool for professional measuring and gauging of door cylinders. It reliably supports the exact determination of the required cylinder dimensions and thus makes it easier to select the right locking cylinder for various door systems. In addition, the construction key enables easy operation of mortise locks, even when no door handles have yet been installed. This makes it ideal for use during the construction phase, during renovations, or as part of installation work when doors already need to be checked and moved before the final hardware installation takes place. The Dulimex construction key impresses with its ease of use and is a helpful accessory for tradespeople, installers, and anyone who needs a quick and precise solution for cylinder measurement and lock operation. Scope of delivery: 1 piece - construction key

Dulimex Disc Padlock DX made of stainless steel Ø 70 mm with 4-digit combination The Dulimex disc padlock DX with a diameter of 70 mm impresses with its robust construction and high protection against tampering. The 4-digit combination is factory-set to 0-0-0-0 and can be individually adjusted after opening and turning a set screw on the back of the lock. This makes the lock the ideal choice for companies, property managers, workshops or private users when the lock needs to be opened by several people. The body is made of high-quality stainless steel and is particularly resistant to corrosion and weather influences. The 9.5 mm thick shackle made of hardened steel provides reliable protection against break-in attempts and ensures high stability in daily use. Whether for gates, sheds, garages, storage rooms, containers or other outdoor areas – the stainless steel DX disc padlock is a durable and reliable solution for a wide range of applications. Scope of delivery: 1 piece - disc padlock

Dulimex Disc Padlock DX Ø 70 mm with keyed alike cylinder The Dulimex disc padlock DX with a diameter of 70 mm impresses with its robust construction and high protection against tampering. Thanks to the keyed alike version with locking system 702, all locks in this series can be conveniently opened and closed with the same key. This makes the lock the ideal choice for companies, property managers, workshops or private users who want to secure multiple access points conveniently. The body is made of high-quality stainless steel and is particularly resistant to corrosion and weather influences. The 9.5 mm thick shackle made of hardened steel provides reliable protection against break-in attempts and ensures high stability in daily use. The integrated 5-pin cylinder guarantees precise locking function and further increases security. Two matching keys are included in the scope of delivery, so the lock is ready for immediate use. Whether for gates, sheds, garages, storage rooms, containers or other outdoor areas - the Dulimex disc padlock DX made of stainless steel is a durable and reliable solution for a wide range of applications. Scope of delivery: 1 piece - disc padlock incl. 2 keys

Dulimex Magnetic Catch POLAIR 5103 for Screw Mounting The POLAIR 5103 magnetic catch from Dulimex is a high-quality magnetic closure for screw mounting and ensures reliable, convenient closing of furniture, cabinet and flap doors. Thanks to its robust construction and powerful permanent magnets, this magnetic catch is suitable both for private furniture making and for professional use in interior finishing, shopfitting or caravan applications. Depending on the version, the magnetic catch is available with a holding force of 4 kg or 8 kg. The 4 kg version has two magnetic holding points and is ideal for light to medium-weight doors. For higher requirements, the version with four magnetic holding points offers a holding force of 8 kg and ensures a particularly secure closure even on heavier fronts or flaps. The simple screw-on installation enables quick and uncomplicated fitting. The scope of delivery also includes a colour-matched strike plate, so the magnetic catch can be visually integrated harmoniously and is ready for immediate use. Scope of delivery: 1 piece - magnetic catch incl. strike plate

Dulimex magnetic catch PRECISION made of stainless steel for wooden doors The Dulimex magnetic door catch is the practical solution for securely and conveniently closing cabinet doors. As a compact catch, the magnetic closure ensures that doors are reliably kept closed while still being easy to open. Depending on your needs, the catch is available with a holding force of 1.5 kg or 3 kg, making it suitable for a wide range of applications in furniture making and interior construction. The scope of delivery includes a matching base plate, a bumper and the required fastening material for easy installation. The paintable surface allows for individual adaptation to the furniture design and ensures discreet integration into existing or new cabinet solutions. The Dulimex magnetic door catch impresses with its ease of use, versatile applications and reliable function as a cabinet door catch. Scope of delivery: 1 set - door magnet incl. adhesive plates & fastening material

Dulimex steel door closer adjustable closing force 1 - 2 for light door frames The Dulimex door closer is the ideal solution for light wooden door frames and ensures that doors close reliably and in a controlled manner. It is especially suitable for fly screen doors, light garden gates or similar wooden doors where automatic closing is desired. Thanks to the adjustable closing force, the door closer can be flexibly adapted to different door sizes and requirements. With the two available closing strengths (closing force 1 and 2), the closing speed can be optimally regulated so that the door closes gently and securely. The compact door closer is suitable for doors with a maximum weight of up to 40 kg and impresses with its easy use as well as its reliable function in everyday use. Scope of delivery: 1 set - door closer incl. mounting screws and pin

Dulimex Universal Box Lock with Bevelled Latch, Bit Key incl. 2 Keys The box lock from Dulimex is the ideal solution for securely locking garden doors and wooden garden gates. Thanks to its robust construction and flexible installation options, the lock is suitable for both left- and right-hinged doors. With a backset of 60 mm and a maximum door thickness of 50 mm, the box lock can be used in many ways and is easy to install. For reliable locking performance, the Dulimex box lock features a bevelled latch and a night bolt that ensures a secure closure. In addition, the integrated extra bolt provides another locking option and thus increases the security of your garden door or garden gate. The scope of delivery includes a door handle set with escutcheon made of black plastic, which is functional and weather-resistant. Also included are a matching strike plate and two bit keys, so the lock is ready for use immediately after installation. Whether as a replacement for an existing lock or for a new garden door, the Dulimex box lock impresses with its ease of use, durable quality and reliable locking technology. Scope of delivery: 1 piece - box lock incl. handle set, strike plate and 2 keys

Dulimex Universal Box Lock with Bevelled Latch, for Euro Profile Cylinder The box lock from Dulimex is the ideal solution for securely locking garden doors and gates made of wood. Thanks to its robust construction and flexible installation options, the lock is suitable for both left-hand and right-hand hung doors. With a backset of 60 mm and a maximum door thickness of 50 mm, the box lock can be used in many ways and is easy to install. For reliable locking, the Dulimex box lock features a bevelled latch and a night bolt that ensures a secure closure. In addition, the integrated extra bolt provides another locking option and thus increases the security of your garden door or gate. The scope of delivery includes a door handle set with escutcheon made of black plastic, which is functional and weather-resistant. A matching strike plate is also included, so the lock is ready for use immediately after installation. Whether as a replacement for an existing lock or for the new construction of a garden door, the Dulimex box lock impresses with its ease of use, durable quality and reliable locking technology. Scope of delivery: 1 piece - box lock incl. handle set and strike plate

Dulimex Universal Box Lock with Lifting Latch, Bit Key incl. 2 Keys The box lock from Dulimex is the ideal solution for securely locking wooden garden doors and gates. Thanks to its robust construction and flexible installation options, the lock is suitable for both left- and right-hinged doors. With a backset of 60 mm and a maximum door thickness of 50 mm, the box lock can be used in many ways and is easy to install. For reliable locking performance, the Dulimex box lock features a lifting latch and night latch that ensure a stable closure. In addition, the integrated extra bolt provides another locking option and thus increases the security of your garden door or gate. The scope of delivery includes a handle set with escutcheon made of black plastic, which is functional and weather-resistant. Also included are a matching strike plate and two bit keys, so the lock is ready for use immediately after installation. Whether as a replacement for an existing lock or for the construction of a new garden door, the Dulimex box lock impresses with its ease of use, durable quality and reliable locking technology. Scope of delivery: 1 piece - box lock incl. handle set, strike plate and 2 keys