Net
Rehau shower door seal made of plastic with lip for glass thickness 4 - 5 mm
Rehau shower door seal made of plastic with lip for glass thickness 4 - 5 mm
Get the high-quality glass bottom seal from REHAU for your shower doors with a glass thickness of 4 - 5 mm. This plastic sealing profile is the ideal solution for sealing frameless showers, framed showers, bath tub screens and other sanitary partitions between glass and floor.
The glass bottom seal is made from the premium RAU-PVC1107 formulation. In combination with an optimal tool design, the rigid PVC area is produced in a uniquely crystal-clear version. This guarantees a high quality and long service life of the product.
The sealing profile has structured soft PVC sealing lips that improve the sliding behavior on the glass and adjacent components. This achieves effective sealing that also helps prevent mould growth. With this glass bottom seal, you can be sure that your bathroom is optimally protected against moisture.
Another advantage of the REHAU glass bottom seal is its high UV resistance. It was specially tested using XENON TEST 1200, cycle 102/18, winding run, to ensure excellent resistance to UV radiation. This means the seal retains its clarity and functionality over a long period of time.
In addition to being used as an original part, the REHAU glass bottom seal is also suitable as a spare part for Palme showers in the Vegas Arcus, Cenit (up to 2011), Cenit Swing 06, Drive P.T. (up to 2013), Gento, X-Free (with water stop rail on the floor) and Fenix (with water stop rail on the floor) series. It also fits various showers from Artweger.
Scope of delivery:
1 piece - shower seal
from
€7.87*
Rehau central seal made of plastic with side lip for glass thickness 4 - 5 mm
Rehau central seal made of plastic with side lip for glass thickness 4 - 5 mm
Get the high-quality REHAU 135° glass bottom seal for your shower doors with a glass thickness of 4 - 5 mm. This plastic sealing profile is the ideal solution for sealing frameless showers, framed showers, bathtub screens and other sanitary partitions between glass and floor.
The glass bottom seal is made from the premium RAU-PVC1107 formulation. In combination with an optimal tool design, the rigid PVC section is produced in a uniquely crystal-clear finish. This guarantees a high level of quality and durability of the product.
The sealing profile features structured soft PVC sealing lips that improve sliding behavior on the glass and adjacent components. This creates effective sealing that also helps prevent mold growth. With this glass bottom seal, you can be sure that your bathroom is optimally protected against moisture.
Another advantage of the REHAU glass bottom seal is its high UV resistance. It has been specially tested using XENON TEST 1200, cycle 102/18, winding run, to ensure excellent resistance to UV radiation. This means the seal retains its clarity and functionality over a long period of time.
In addition to being used as an original part, the REHAU glass bottom seal is also suitable as a spare part for Palme showers in the Vegas Arcus, Cenit (up to 2011), Cenit Swing 06, Drive P.T. (up to 2013), Gento, X-Free (with overflow rail at the bottom) and Fenix (with overflow rail at the bottom) series. It also fits various showers from Artweger.
Scope of delivery:
1 piece - shower seal
from
€8.63*
Rehau magnetic seal for shower doors with glass thickness 4-5 mm, 90°, 2000 mm
Rehau magnetic seal for shower doors with glass thickness 4 - 5 mm, 90°
The 90° magnetic seal from REHAU is the perfect choice if you need a high-quality and reliable seal for your glass shower door. This two-part magnetic seal was specially developed for glass thicknesses from 4 to 5 mm and guarantees optimum sealing and easy handling.
REHAU is known for its high-quality profiles for shower partition construction, which are perfectly suited to various shower partition systems thanks to their tailored material formulation. Whether for frameless showers, framed showers, bath screens or other sanitary partitions, REHAU profiles are the right choice.
One of the outstanding features of the sealing profile is its high UV resistance. At REHAU, every seal is tested using the XENON TEST 1200, cycle 102/18, spiral run to ensure that it can withstand demanding conditions. Thanks to the high-quality RAU-PVC1107 formulation combined with an optimal tool design, REHAU offers you a unique crystal-clear version in the rigid PVC range.
The magnetic pockets of all door seal profiles are overmoulded in a structured soft PVC material formulation. This prevents the profiles from sticking together and does not impair the door closure. In addition, the structured soft PVC sealing lips improve sliding behaviour on the glass and adjacent components. With this special material formulation, REHAU ensures high elasticity and effectively prevents mould growth.
The magnetic seal is also suitable as a spare part for Palme showers from the Vegas Classic, Cenit Swing (up to 2005), Top Drive (up to 2007), Cenit Eco series and various Artweger showers. So if you own one of these showers and need a new magnetic seal, this magnetic seal is the perfect solution.
Scope of delivery:
1 pair - magnetic seal (double-sided)
€24.05*
Rehau magnetic seal for shower doors with corner entry and glass thickness 4 - 5 mm, 90° 2000 mm
Rehau magnetic seal for shower doors with corner entry and glass thickness 4 - 5 mm, 90° 2000 mm
The 90° magnetic seal with corner stop from Rehau is the perfect solution for your shower if you value quality, durability and maximum water tightness. Manufactured in the EU, this shower seal guarantees 100% protection against splashing water and ensures that your bathroom always stays dry. Thanks to its well-thought-out design, the seal fits universally to any shower type with corner entry and is suitable for glass thicknesses from 6 mm to 8 mm.
This magnetic shower seal impresses with its exceptional robustness: it is shatterproof, mold-resistant, limescale-resistant and UV-stabilized, so it works reliably for years even under heavy use. Whether for daily use in private households or in demanding commercial settings.
Scope of delivery:
1 pair - magnetic seal (double-sided)
€24.05*
Rehau magnetic seal for shower doors WITH STOP with glass thickness 4-5 mm, 180°, 2000 mm
Rehau magnetic seal for shower doors WITH STOP with glass thickness 4-5 mm, 180°, 2000 mm
The 180° magnetic seal from REHAU is the perfect choice if you need a high-quality and reliable seal for your glass shower door. This two-part magnetic seal was specially developed for glass thicknesses from 4 to 5 mm and guarantees optimal sealing and easy handling.
REHAU is known for its high-quality profiles for shower partition construction, which are perfectly suited for various shower partition systems thanks to their tailored material formulation. Whether for frameless showers, framed showers, bath screens or other sanitary partitions, REHAU profiles are the right choice.
One of the outstanding features of the sealing profile is its high UV resistance. At REHAU, every seal is tested using the XENON TEST 1200, cycle 102/18, winding run, to ensure that it withstands demanding conditions. Thanks to the high-quality RAU-PVC1107 formulation combined with an optimal tool design, REHAU offers you a unique crystal-clear version in the rigid PVC range.
The magnetic pockets of all door seal profiles are overmoulded in a structured soft PVC material setting. This prevents the profiles from sticking together and does not impair the door closure. In addition, the structured soft PVC sealing lips improve sliding behaviour on the glass and adjacent components. With this special material formulation, REHAU ensures high elasticity and effectively prevents mould growth.
The magnetic seal is also suitable as a spare part for Palme showers from the Vegas Classic, Cenit Swing (up to 2005), Top Drive (up to 2007), Cenit Eco series and various showers from Artweger. So if you own one of these showers and need a new magnetic seal, this magnetic seal is the perfect solution.
Scope of delivery:
1 pair - magnetic seal (double-sided)
€24.05*
Rehau magnetic seal for shower doors with glass thickness 4 - 5 mm, 135°
Rehau magnetic seal for shower doors with glass thickness 4 - 5 mm, 135°
The 135° magnetic seal from REHAU is the perfect choice if you need a high-quality and reliable seal for your glass shower door. This two-part magnetic seal was specially developed for glass thicknesses from 4 to 5 mm and guarantees optimum sealing and easy handling.
REHAU is known for its high-quality profiles for shower partition construction, which are perfectly suited for various shower partition systems thanks to their tailored material formulation. Whether it is frameless showers, framed showers, bath screens or other sanitary partitions, REHAU profiles are the right choice.
One of the outstanding features of the sealing profile is its high UV resistance. At REHAU, every seal is tested using the XENON TEST 1200, cycle 102/18, winding run to ensure that it can withstand demanding conditions. Thanks to the high-quality RAU-PVC1107 formulation combined with an optimal tool design, REHAU offers you a unique crystal-clear version in the rigid PVC range.
The magnetic pockets of all door seal profiles are overmoulded in a structured soft PVC material setting. This prevents the profiles from sticking together and does not impair the door closure. In addition, the structured soft PVC sealing lips improve sliding behaviour on the glass and adjacent components. With this special material formulation, REHAU ensures high elasticity and effectively prevents mould growth.
The magnetic seal is also suitable as a spare part for Palme showers in the Vegas Classic, Cenit Swing (up to 2005), Top Drive (up to 2007), Cenit Eco series and various showers from Artweger. So if you own one of these showers and need a new magnetic seal, this magnetic seal is the perfect solution.
Scope of delivery:
1 pair - magnetic seal (double-sided)
€24.05*
Rehau magnetic seal without stop for shower doors with glass thickness 4 - 5 mm, 180° 2000 mm
Rehau magnetic seal without stop for shower doors with glass thickness 4 - 5 mm, 180° 2000 mm
The 180° magnetic seal without stop from Rehau is the perfect solution for your shower if you value quality, durability and maximum water tightness. Manufactured in the EU, this shower seal guarantees 100% protection against splashing water and ensures that your bathroom always stays dry. Thanks to its well-thought-out design, the seal fits universally to any shower type and is suitable for glass thicknesses from 4 mm to 5 mm.
This magnetic shower seal impresses with its exceptional robustness: it is break-resistant, mold-resistant, limescale-resistant and UV-stabilized, so it functions reliably for years even under heavy use. Whether for daily use in private households or in demanding commercial settings – the Rehau 180° magnetic seal without stop offers lasting security, first-class workmanship and easy installation. Trust a shower seal that combines water protection and durability.
Scope of delivery:
1 pair - magnetic seal (double-sided)
€24.05*
Gedotec brush seal FLEX-DOWN for screw mounting, sold by the metre brush height 15 - 30 mm
Gedotec brush seal FLEX-DOWN for screw mounting, sold by the metre brush height 15 - 30 mm
The Gedotec brush seal FLEX-DOWN is a high-quality and flexible sealing solution for reliable sealing of doors, gates and various gap areas. Thanks to its dense, single-row brush trim, the sealing brush is ideal for reducing draughts, dust and dirt. The combination of high-quality plastic bristles and a flexible plastic carrier enables versatile applications in interior finishing, furniture construction and individual sealing projects.
The FLEX-DOWN brush seal was specially developed for screw-on installation and can be attached to the underside of suitable doors, profiles or other components. The dense, single-row trim made of plastic bristles forms a flexible seal that can adapt to minor unevenness in the adjacent surface. This allows gaps and spaces to be effectively covered without unnecessarily restricting the mobility of the respective components. The brush seal is available with a brush height of 15 to 30 mm and is therefore suitable for different gap sizes.
The flexible plastic carrier is particularly practical, as it allows adaptation to different installation routes. In contrast to rigid brush profiles, the flexible brush strip can also be used in a versatile way in suitable structural conditions. Installation is carried out by screwing it to the underside of the respective component using suitable fixing screws.
Scope of delivery:
1 metre - brush seal (sold by the metre, cut to length from the 25 metre roll)
from
€8.05*
Gedotec brush seal FLEX for screw mounting, per meter brush height 10 - 30 mm
Gedotec brush seal FLEX for screw mounting, per meter brush height 10 - 30 mm
The Gedotec brush seal FLEX is a high-quality and flexible sealing solution for sealing doors, gates, flaps and various gap areas. Thanks to its dense, single-row brush trim, the brush seal is ideal for reducing draughts, dust and dirt. The robust plastic brush with flexible plastic carrier enables versatile use in interior finishing, furniture construction and individual sealing projects.
The brush seal has a closely spaced, single-row trim of plastic bristles that can adapt to minor unevenness in the adjacent surface. This allows gaps and spaces to be reliably covered without unnecessarily restricting the movement of doors or other components. Depending on the requirement, the sealing brush is available with a brush height of 10 to 30 mm and therefore offers suitable solutions for different gap sizes.
Particularly practical is the flexible plastic carrier, which allows adaptation to different installation paths. The brush strip is designed for screw mounting and can be attached in the desired position with suitable fixing screws. Thanks to its flexible construction, the sealing brush is also suitable for applications where rigid brush profiles can only be used to a limited extent.
Scope of delivery:
1 meter - brush seal (meter goods cut to length from the 25 meter roll)
from
€7.81*
Gedotec brush seal DOUBLE-FLEX for screw mounting, sold by the meter brush height 20 - 30 mm
Gedotec brush seal DOUBLE-FLEX for screw mounting, sold by the meter brush height 20 - 30 mm
The Gedotec brush seal DOUBLE-FLEX is a high-quality and flexible sealing solution with a dense, double-row brush strip for reliable sealing of doors, gates and various gap areas. Thanks to the double arrangement of the plastic bristles, the brush seal provides particularly dense coverage of gaps and is ideal for reducing drafts, dust and dirt. The flexible plastic design allows versatile use in interior construction, furniture making and individual sealing projects.
The DOUBLE-FLEX brush seal is characterized by its double-row arrangement of high-quality plastic bristles. The two brush rows form a dense barrier and can adapt to minor unevenness in the adjacent surface. This makes it possible to effectively cover gaps and spaces while movable components can still be opened and closed. The sealing brush is available with a brush height of 20 to 30 mm and is therefore suitable for different gap sizes and sealing requirements.
The flexible plastic carrier is particularly practical, as it allows adaptation to different installation paths. In contrast to rigid brush profiles, the flexible version offers additional options for fastening to suitable surfaces. The brush strip is designed for screw mounting and can be installed on doors, frames or other structural parts with suitable fastening screws.
Scope of delivery:
1 meter - brush seal (sold by the meter as a continuous length from the 25 meter roll)
from
€15.27*
Gedotec cabinet lock 5013 for screw mounting, backset 20 - 30 mm
Gedotec cabinet lock 5013 for screw mounting, backset 20 - 30 mm
The Gedotec cabinet lock 5013 is a functional and decorative furniture lock for securely locking cabinet and furniture doors. Its classic design makes this screw-on lock especially suitable for traditional wooden furniture, antique cabinets and rustic interior concepts. The robust metal construction combines a reliable locking function with a timeless look, making the furniture lock a practical solution for furniture construction, interior finishing and the restoration of existing furniture pieces.
The cabinet lock is designed for use with suitable furniture keys with Euro lock. The integrated locking mechanism operates the side-mounted bolt and thus enables cabinet doors to be locked and unlocked. Thanks to its reversible design, the lock can be used on both left-hand and right-hand hinged cabinet doors. This offers additional flexibility during installation and allows use in different furniture constructions.
The rectangular lock plate with decorative cut-out corners underlines the traditional character of the furniture fitting. The classic keyhole blends harmoniously into the appearance. The four pre-drilled fixing holes allow easy screw mounting on suitable wooden surfaces. Thanks to the surface-mounted design, the cabinet lock can be fitted without the need for complex routing into the furniture door.
Scope of delivery:
1 piece - furniture lock
from
€3.82*
Gedotec recessed ball furniture caster, swivel, screw-on, Ø 26 - 45 mm
Gedotec recessed ball furniture caster, swivel, screw-on, Ø 26 - 45 mm
The Gedotec recessed ball furniture caster is a practical and versatile solution for the movable support of furniture pieces and other suitable constructions. Thanks to its compact, round design and the freely rotating steel ball, the caster enables flexible movement in different directions. The brass-plated iron mounting plate gives the fitting a decorative appearance and makes it a functional addition for furniture construction, interior finishing, and custom furniture projects.
The ball caster features a centrally mounted steel ball that can rotate freely in its housing. In contrast to conventional furniture casters with a fixed rolling direction, the ball design allows movement in all directions without the caster needing to be swivelled first. This makes the recessed caster particularly suitable for furniture and movable elements that need to be shifted or positioned flexibly.
The round mounting plate made of brass-plated iron has three pre-drilled fixing holes, allowing easy screw mounting to suitable furniture parts. Thanks to the recessed installation, the ball housing can be integrated space-savingly into a correspondingly prepared cut-out. The sturdy metal construction with a steerable steel ball provides a functional and compact caster solution.
Scope of delivery:
1 piece - furniture caster
from
€1.72*
Gedotec Ventilation Ring made of metal, Ø 35 mm with mesh screen
Gedotec Ventilation Ring made of metal, Ø 35 mm with mesh screen
The Gedotec ventilation ring with mesh screen made of metal is a practical and decorative solution for ventilating furniture, cabinets and various interior fittings. With its round shape and fine-mesh metal grille, the ventilation insert combines functional air circulation with an attractive appearance. It is ideal for furniture construction, interior finishing and for retrofitting existing furniture structures with ventilation.
The round ventilation ring has an integrated mesh screen that allows air exchange between adjacent areas while reducing the ingress of larger dirt particles and foreign objects. This makes the furniture ventilation grille particularly suitable for cabinet doors, furniture fronts, shelves and panels where additional passive ventilation is desired. The even grille structure ensures a discreet and harmonious appearance.
The sturdy metal construction provides a robust and durable design. Thanks to the cylindrical insertion part, the ventilation ring can be fitted into a suitably prepared round opening. The surrounding rim ensures a clean finish and covers the cut edge of the drilled hole. The different surface finishes allow suitable coordination with various furniture fittings, materials and interior styles.
Scope of delivery:
1 piece - ventilation grille
from
€5.83*
Gedotec Chipboard Screw made of Steel Countersunk Head Full Thread PZ, Brass Polished Ø 2.5 - 3.5 mm
Gedotec Chipboard Screw made of Steel, Countersunk Head Full Thread PZ, Brass Polished Ø 2.5 - 3.5 mm
The Gedotec chipboard screw made of steel is a robust and versatile universal screw for reliable fastening in furniture construction, interior finishing, and general assembly work. Thanks to its sturdy steel construction and decorative brass-plated surface in a polished finish, the wood screw combines reliable fastening with a high-quality appearance. It is ideal for numerous applications in wood-based materials and other suitable materials.
The universal screw is suitable for use in natural wood, chipboard, plywood, and various plastics. In addition, it can be used in combination with suitable wall plugs as well as for fastening thin metal sheets. The thread extending up to under the screw head enables continuous thread engagement and ensures a reliable connection of the joined components.
The Pozidriv drive (PZD) enables good power transmission when driving in the screw and supports controlled processing with a suitable screwdriver or cordless drill. The countersunk head can be flush-mounted in the surface in appropriately prepared materials and thus ensures a clean and visually appealing finish.
Scope of delivery:
1 piece - screw
from
€0.04*
Gedotec ventilation grille made of wood, 400 x 60 mm
Gedotec ventilation grille made of wood, 400 x 60 mm
The Gedotec ventilation grille made of wood is a practical and decorative solution for ventilating furniture, doors and interior spaces. With its dimensions of 400 x 60 mm, the elongated wooden ventilation grille is ideal for furniture construction, interior finishing and for retrofitting existing wooden structures. The natural wood look and simple design allow harmonious integration into different interior styles.
The ventilation grille has several evenly arranged, elongated ventilation openings that allow air circulation between adjacent areas. This can improve air exchange in closed furniture constructions and paneling. Especially for cabinets, doors and other built-in elements where additional passive ventilation is desired, the wooden ventilation grille offers a functional solution.
The recessed ventilation grille is intended for installation in a suitably prepared cutout. Thanks to its elongated, flat design, it can be integrated into wooden surfaces in a space-saving way. The natural wood grain gives the ventilation insert a warm and timeless appearance. Depending on the desired design, the wooden surface can be painted, oiled or stained to match the grille to existing furniture and wooden elements in terms of color.
Scope of delivery:
1 piece - ventilation grille
€9.90*
Gedotec Wooden Wardrobe Rod Holder for Ø 28 mm Wooden Rod, Mounting Under the Shelf
Gedotec Wooden Wardrobe Rod Holder for Ø 28 mm Wooden Rod, Mounting Under the Shelf
The Gedotec wooden wardrobe rod holder is a practical and decorative bracket for fastening clothes rails and wardrobe rods beneath shelves. The holder is specially designed for wooden rods with a diameter of 28 mm and is ideal for furniture construction, interior fitting, and the individual design of wardrobes and coat racks. Thanks to its natural wood look, the wardrobe rod holder blends harmoniously into different furniture constructions.
The wardrobe rod holder features an upward-open, semicircular recess into which a matching wooden clothes rail can simply be inserted. The rounded shape provides a functional support surface and allows the rod to be inserted or removed with ease. Thanks to mounting underneath a shelf, the bracket is particularly suitable for wardrobe constructions where the clothes rail is to be fitted directly below a shelf surface.
Particularly practical is the integrated M6 internal thread on the top of the wardrobe rod holder. This allows fastening through the shelf with a suitable M6 screw. As a result, the bracket can be mounted directly to the underside of wardrobe shelves, shelf boards, or coat rack elements without side screwing. The natural wooden surface can be painted, oiled, or stained if required, allowing it to be individually matched to existing furniture surfaces.
Scope of delivery:
1 piece - wardrobe rod holder
€2.50*
Gedotec wardrobe rail centre support made of wood for Ø 28 mm wooden rod
Gedotec wardrobe rail centre support made of wood for Ø 28 mm wooden rod
The Gedotec wardrobe rail centre support made of wood is a practical and stable bracket for additional support of clothes rails in wardrobes and cloakrooms. Specially designed for wooden rods with a diameter of 28 mm, the centre support is ideal for furniture construction, interior fitting and the individual design of wardrobes and cloakroom systems. The natural wood look blends harmoniously into different furniture constructions.
The wardrobe rail centre support has a closed, ring-shaped holder through which a matching wooden clothes rail is guided. This allows the rail to be supported in the middle in addition to the side wardrobe rail supports. Especially with longer clothes rails, this additional support offers a practical way to distribute the load more evenly and reduce sagging of the rail.
Attachment is made via the integrated M6 internal thread on the top of the wooden support. With a suitable M6 screw, the bracket can be mounted through a shelf board or wardrobe element to its underside. The compact design allows space-saving installation, while the closed holder fully encloses the clothes rail.
Scope of delivery:
1 piece - wardrobe rail support
€2.50*
Gedotec decorative nail JOLANDA made of wood, Ø 8 - 10 mm
Gedotec decorative nail JOLANDA made of wood, Ø 8 - 10 mm
The Gedotec decorative nail JOLANDA made of wood is a decorative fastening element for furniture construction, interior finishing and the individual design of wooden furniture. With its natural wood look and characteristically domed nail head, the wooden decorative nail combines classic design with versatile applications. It is particularly suitable for furniture pieces where natural materials and traditional wood joints are the focus.
The decorative nail is distinguished by its rounded, domed head and the visible wood grain. The domed shape creates a harmonious, decorative finish and adds subtle accents to wooden surfaces. In contrast to conventional decorative nails made of metal, the wooden nail blends particularly naturally into furniture constructions and emphasizes the warm character of the wood used.
Thanks to its decorative design, the Gedotec decorative nail is suitable for various applications in traditional furniture making and in the restoration of wooden furniture. It can be used, for example, for the visual design of cabinet fronts, wooden chests, doors and other decorative wooden elements. The natural wooden surface also makes it possible to match the decorative nail in color to the respective piece of furniture if required.
Scope of delivery:
1 piece - decorative nail
from
€0.20*
Gedotec wooden wardrobe rod holder Ø 50 mm for Ø 28 mm wooden rod
Gedotec wooden wardrobe rod holder Ø 50 mm for Ø 28 mm wooden rod
The Gedotec wardrobe rod holder made of beech wood is a practical and decorative bracket for fastening clothes rails and wardrobe rods made of wood. With an outer diameter of 50 mm and a matching recess for wooden rods with a diameter of 28 mm, the wardrobe rod holder is ideal for furniture construction, interior finishing and the individual design of wardrobes and coat racks. The natural wood look blends harmoniously into different furniture constructions.
The round wardrobe rod holder has a semicircular, open-top recess into which a suitable wooden rod can simply be inserted. This makes it easy to insert or remove the clothes rail when needed. The rounded, shell-shaped design provides a suitable support surface for the wooden rod while also creating a simple, harmonious appearance.
Made from robust beech wood, the clothes rail holder impresses with its natural grain, high strength and good machinability. The central, countersunk fixing hole allows easy screw mounting on suitable wardrobe sides or other load-bearing wooden surfaces. The light wood surface can be oiled, varnished, glazed or colour-treated if required to match the wardrobe rod holder individually to the respective furniture interior.
Scope of delivery:
1 piece - wardrobe rod holder
€1.50*
Gedotec wooden wardrobe rod holder 80 x 60 mm for Ø 28 mm wooden rod
Gedotec wooden wardrobe rod holder 80 x 60 mm for Ø 28 mm wooden rod
The Gedotec wooden wardrobe rod holder is a practical and decorative bracket for fastening clothes rods and wardrobe rails made of wood. With its dimensions of 80 x 60 mm and the matching holder for wooden rods with a diameter of 28 mm, the wardrobe rod holder is ideal for furniture construction, interior finishing, and the individual design of wardrobes and coat racks. The natural wood look blends harmoniously into different furniture constructions.
The wardrobe rod holder has a semicircular recess into which a suitable wooden rod can be inserted. The open holder allows the clothes rod to be inserted and removed easily. This makes the bracket particularly suitable for wardrobes, walk-in closets, and custom storage solutions. The rectangular basic shape with rounded outer edges ensures a simple and timeless appearance.
The two pre-drilled fixing holes allow easy screw mounting on suitable cabinet sides or other load-bearing wooden surfaces. The sturdy wooden construction provides a functional support for the clothes rod and supports reliable fastening when installed correctly. Thanks to the natural wooden surface, the wardrobe rod holder can be painted, oiled, stained, or color-matched to the respective furniture as required.
Scope of delivery:
1 piece - wardrobe rod holder
€1.50*
Tyr table leg made of beech wood, 760 mm
Gedotec table leg TYR made of beech wood, 760 mm
The Gedotec TYR table leg made of beech wood is a high-quality and decorative solution for custom furniture and table construction. Made from sturdy beech wood, this wooden leg impresses with its natural grain, stable construction and elaborately turned shape. The classic design with decorative curves and flowing elements gives furniture an elegant, traditional character and is especially suitable for country-style, vintage-style or classic interiors.
The table leg is distinguished by its artistically turned design with several decorative profiles. The upper, angular section allows integration into suitable table substructures and transitions into a turned middle section with attractive curves. The long leg, slightly tapered towards the bottom, is complemented by additional decorative rings and a curved foot end. This design makes the table leg a special eye-catcher on dining tables, desks and custom-made wooden furniture.
Beech wood is characterized by its high strength, good workability and natural durability. The light wood color and fine grain provide an ideal basis for individual surface finishes. Depending on the desired appearance, the table leg can be oiled, varnished, stained or color-treated. This allows the wooden leg to be harmoniously matched to different table tops, furniture surfaces and interior styles.
Scope of delivery:
1 piece - table leg
from
€23.30*
Gedotec wooden table slide for tables with central opening, 1100 mm
Gedotec wooden table slide for tables with central opening, 1100 mm
The Gedotec wooden table slide is a practical and functional solution for extendable tables with a central opening. With a length of 1100 mm, the wooden guide is ideal for building extendable dining tables, kitchen tables and custom-made table constructions. Thanks to its three-stage design, the table slide enables flexible expansion of the table surface and combines traditional woodworking with a space-saving and functional construction.
The table slide was specially developed for tables whose tabletop is pulled apart in the middle. By sliding the two table halves apart, additional space is created in the center for suitable extension leaves, allowing the table surface to be enlarged as needed. The three-stage wooden guide supports the guided movement of the table construction and enables the table halves to be pulled apart and pushed together evenly.
The elongated wooden profiles have pre-drilled mounting holes, which allow easy integration into suitable table substructures. The coordinated guide elements form a mechanical extension mechanism that does not require visible metal rails. The natural wooden construction is particularly suitable for classic wooden tables, traditional furniture constructions and individual table-building projects.
Whether for the manufacture of an extendable dining table, the restoration of existing extendable tables or the construction of custom-made furniture - the Gedotec wooden table slide with a length of 1100 mm offers a practical solution for extending table surfaces. It combines the function of a three-stage table extension with a classic wooden construction and is ideal for professional furniture making and demanding DIY projects.
Scope of delivery:
1 pair - table slide (left / right)
€94.58*
Gedotec table leg BALDER made of beech wood, 760 x 75 x 75 mm
Gedotec table leg BALDER made of beech wood, 760 x 75 x 75 mm
The Gedotec table leg BALDER made of beech wood is a high-quality and decorative solution for custom furniture and table construction. Made from sturdy beech wood, this wooden leg impresses with its natural grain, stable construction and artistically turned design. The combination of classic curves, decorative profiles and a slim silhouette makes this table leg an attractive choice for traditional wooden furniture, country-style furniture and stylish interior concepts.
The table leg is characterized by its elaborately crafted turning work. The upper, angular section transitions through several decorative curves and a distinctive spherical ornament into the long, downward-tapering middle section. In the lower area, a profiled ring and another curved end create a harmonious and elegant overall appearance. This classic design gives dining tables, desks and custom-made furniture a special character.
Beech wood is characterized by its high strength, good workability and natural durability. The light wood color and characteristic fine grain provide an ideal basis for individual surface finishes. Depending on the desired interior style, the table leg can be oiled, varnished, stained or color-treated. This allows the wooden leg to be harmoniously combined with different table tops and existing furniture surfaces.
Scope of delivery:
1 piece - table leg
€23.30*
Gedotec table leg BRAGI made of beech wood, 750 x 70 x 70 mm
Gedotec table leg BRAGI made of beech wood, 750 x 70 x 70 mm
The Gedotec table leg BRAGI made of beech wood is a high-quality and decorative solution for custom furniture and table construction. Made from robust beech wood, this wooden leg impresses with its natural grain, stable construction and elegant shape. The combination of straight design and subtle decorative elements makes the table leg an attractive choice for classic, modern and traditional furniture pieces.
The table leg is characterized by its tapered shape and the decorative milling in the upper section. While the upper section has a straight, angular shape, the profiled ornamentation creates a stylish transition to the slender tapering leg. This creates a harmonious silhouette that is particularly well suited to dining tables, desks and custom-made wooden furniture. The simple design with a classic decorative detail can be combined in many ways with different table tops and interior styles.
Beech wood is characterized by its high strength, good workability and natural durability. The light wood color and fine grain provide an ideal basis for individual surface finishes. Depending on the desired look, the table leg can be oiled, varnished, stained or color-treated. This allows it to be harmoniously adapted to existing furniture pieces and different living concepts.
Scope of delivery:
1 piece - table leg
€21.78*
Gedotec table leg IDUNN made of beech wood, 750 x 75 x 75 mm
Gedotec table leg IDUNN made of beech wood, 750 x 75 x 75 mm
The Gedotec table leg IDUNN made of beech wood is a high-quality and natural solution for custom furniture and table construction. Made from robust beech wood, the wooden leg impresses with its stable construction, characteristic wood grain and simple, elegant design. The timeless design is suitable for both modern and classic interior concepts and can be combined in many ways with different table tops and furniture styles.
The table leg is characterized by its straight, downward tapering shape. The subtle taper gives the furniture leg a slim and elegant silhouette without sacrificing the natural appeal of the wood. Thanks to its linear design, the table leg is particularly suitable for dining tables, desks, work tables and custom-made furniture pieces.
Beech wood is characterized by its high strength, good workability and natural durability. The light wood color and fine, even grain provide a versatile basis for individual design options. Depending on the desired appearance, the wood surface can be oiled, varnished, stained or color-adjusted. This allows the table leg to be harmoniously integrated into different living and furnishing styles.
Scope of delivery:
1 piece - table leg
€25.34*
Gedotec table leg FRIGG made of beech wood, 750 x 75 x 75 mm
Gedotec table leg FRIGG made of beech wood, 750 x 75 x 75 mm
The Gedotec table leg FRIGG made of beech wood is a high-quality and decorative solution for custom furniture and table construction. Made from natural beech wood, this wooden leg impresses with its stable construction, characteristic wood grain and elegant, curved shape. With a height of 750 mm and a cross section of 75 x 75 mm, the table leg is ideal for the manufacture and restoration of various table constructions.
The special design of the table leg is characterized by its slim, downward tapering shape with a subtle curved line. This gives tables an elegant yet natural look. The straight top allows integration into suitable table substructures, while the curved shape adds a stylish accent. The wooden leg harmonizes particularly well with classic, Scandinavian and modern interior concepts.
Beech wood is characterized by its high strength, good workability and natural durability. The light wood color and fine grain make the table leg a versatile basis for individual furniture projects. Depending on the desired design, the wooden surface can be treated, varnished, oiled or color-matched as required.
Scope of delivery:
1 piece - table leg
€19.36*
Gedotec handle screw M4 x 45 nickel-plated, shorten-able
Gedotec handle screw made of steel M4 x 45 mm, shorten-able
The Gedotec handle screw M4 x 45 mm is a practical and versatile fastening screw for mounting furniture handles, furniture knobs and other furniture fittings. Made of robust steel with a zinc-plated surface, the screw is ideal for furniture construction, interior finishing as well as for repairing and retrofitting existing furniture pieces. Thanks to its individually shorten-able design, the screw length can be flexibly adapted to different material thicknesses.
The handle screw has a metric M4 thread and an overall length of 45 mm. Particularly practical are the integrated predetermined breaking points or shortening grooves along the screw shaft. These allow the screw to be cut to the required length. This makes the furniture screw suitable for various door and front thicknesses without the need to keep different screw lengths in stock.
The flat screw head has a combined drive that allows easy installation with suitable screw tools. The zinc-plated surface provides additional protection against corrosion and supports a long service life of the steel fastening. The metric M4 thread is compatible with appropriately designed furniture handles and knobs.
Scope of delivery:
1 piece - screw
from
€0.20*
Gedotec furniture hinge made of brass, round, Ø 40 mm
Gedotec furniture hinge made of brass, round, Ø 40 mm
The Gedotec furniture hinge made of brass is a high-quality and functional furniture fitting with a classic, round design. With a diameter of 40 mm, the round hinge is ideal for mounting smaller cabinet and furniture doors as well as for custom furniture constructions. The combination of robust material and timeless design makes the brass hinge a practical solution for furniture making, interior finishing, and the repair and restoration of existing wooden furniture.
The round furniture hinge enables a pivoting connection between two furniture parts and ensures convenient opening and closing of doors or flaps. Thanks to its compact and space-saving design, the furniture fitting is particularly suitable for smaller cabinets, chests of drawers, display cabinets, and decorative wooden furniture. The round shape offers an alternative to conventional rectangular furniture hinges and blends harmoniously into a wide range of furniture designs.
Made from high-quality brass, the Gedotec round hinge impresses with its stable material quality and good corrosion resistance. The natural brass finish gives the fitting a classic and elegant character that harmonizes especially well with traditional furniture pieces and high-quality wooden surfaces.
Scope of delivery:
1 piece - furniture hinge
from
€1.80*
Gedotec brass furniture hinge, round, Ø 40 mm with vertical adjustment
Gedotec brass furniture hinge, round, Ø 40 mm with vertical adjustment
The Gedotec brass furniture hinge is a high-quality and functional furniture fitting with a classic round design and practical height adjustment. With a diameter of 40 mm, the round hinge is ideal for mounting cabinet and furniture doors as well as for custom furniture constructions. The combination of robust brass and integrated adjustment capability makes the hinge a versatile solution for furniture making, interior finishing, and for the repair and restoration of existing wooden furniture.
The round furniture hinge enables a pivoting connection between the door and the furniture корпус and ensures comfortable opening and closing. Particularly practical is the integrated vertical adjustment via an elongated hole, which allows the door position to be adjusted in height during installation. This makes it possible to compensate for minor height deviations and align furniture doors precisely. The compact design allows space-saving integration into a wide range of furniture constructions.
Made from high-quality brass, the Gedotec round hinge impresses with its stable material quality and good corrosion resistance. The classic brass look gives the fitting an elegant character and harmonizes especially well with natural wood surfaces and traditional furniture pieces. The round shape also offers a decorative alternative to conventional rectangular furniture hinges.
Scope of delivery:
1 piece - furniture hinge
from
€1.78*
Gedotec flap hinge 313 made of brass with steel spring for increased movement resistance
Gedotec flap hinge 313 made of brass with steel spring for increased movement resistance
The Gedotec flap hinge 313 is a high-quality and functional furniture fitting made of robust brass profile with an integrated steel spring. Thanks to its special spring mechanism, the furniture hinge offers increased movement resistance both when opening and closing. This makes the spring hinge ideal for furniture flaps, cabinet doors and custom furniture constructions where a damped or more resistant pivot movement is desired without additional damping elements.
The integrated steel spring creates a mechanical resistance that affects the movement of the flap in both directions. This allows the flap to be opened and closed with noticeable resistance, which can reduce unintended, easy swinging. In contrast to conventional furniture hinges without a spring, the Gedotec flap hinge 313 therefore offers an additional functional feature for special furniture applications.
Made from high-quality brass profile, the hinge impresses with its stable construction, good corrosion resistance and classic brass appearance. The integrated steel spring complements the robust design and provides the characteristic movement resistance. The two rectangular hinge leaves have a total of eight pre-drilled fixing holes, allowing simple and reliable screw mounting on suitable furniture parts.
Scope of delivery:
1 piece - furniture hinge
€7.94*
Gedotec Furniture Hinge 107 made of brass 40 x 35 mm, rebated with vertical adjustment
Gedotec Furniture Hinge 107 made of brass 40 x 35 mm, rebated with vertical adjustment
The Gedotec furniture hinge 107 is a high-quality and functional furniture fitting made of robust brass profile, specially developed for mounting rebated cabinet and furniture doors. With its compact dimensions of 40 x 35 mm and the integrated vertical adjustment option, the hinge is ideal for furniture construction, interior finishing, as well as for the repair and restoration of existing wooden furniture.
The furniture hinge features a rebated or cranked design that allows suitable fastening to furniture parts with stepped door edges. The two hinge leaves are connected by a sturdy pivot joint and enable reliable swinging movement of the furniture door. Particularly practical is the integrated slotted hole, which allows vertical adjustment of the door position during installation. This makes it possible to compensate for minor height deviations and align cabinet doors precisely with the furniture carcass.
Made from high-quality brass profile, the Gedotec furniture hinge impresses with its sturdy workmanship and good corrosion resistance. The pre-drilled, countersunk fixing holes allow simple and neat screw mounting. Thanks to its compact design, the furniture hinge can also be used in smaller cabinet constructions and limited spaces. The different surface finishes also make it possible to choose the hinge to match the respective furniture style.
Scope of delivery:
1 piece - furniture hinge
from
€1.58*
Gedotec brass furniture hinge 50 x 40 mm, double rebated
Gedotec brass furniture hinge 50 x 40 mm, double rebated
The Gedotec brass furniture hinge is a high-quality and robust furniture fitting for mounting rebated cabinet and furniture doors. With its dimensions of 50 x 40 mm and the double rebated design, the hinge is ideal for classic furniture construction, interior finishing, as well as for the restoration and retrofitting of existing wooden furniture. The timeless design combines reliable hinge function with an elegant and high-quality appearance.
The furniture hinge was specially developed for rebated or double rebated furniture doors, where the door leaf has a stepped edge and lies partly within the furniture carcass when closed. Thanks to the double cranked hinge leaves, the fitting can be mounted appropriately on matching door and carcass constructions. The centrally positioned pivot joint enables smooth swinging movement and comfortable opening and closing of the furniture door.
Made from high-quality brass profile, the furniture hinge impresses with its stable construction and good corrosion resistance. The robust material design supports a long service life and makes the hinge a reliable solution for everyday use. Thanks to its compact dimensions of 50 x 40 mm, the furniture fitting can be used in a wide variety of furniture constructions.
Scope of delivery:
1 piece - furniture hinge
from
€2.50*
Gedotec Decorative Hinge 140 made of brass with decorative barrel bronze
Gedotec Decorative Hinge 140 made of brass with decorative barrel bronze
The Gedotec Decorative Hinge 140 is a high-quality and decorative furniture hinge made of brass that combines classic elegance with reliable functionality. With its straight hinge leaves and the attractively designed decorative barrel, this furniture hinge is especially suitable for traditional wooden furniture, antique cabinets and stylish interior concepts. The decorative ends give the fitting a timeless character and make it an attractive design element on visible furniture hinges.
The decorative hinge was specially developed for inset furniture doors, where the door leaf sits within the furniture carcass when closed. The two flat hinge leaves are connected by a centrally positioned pivot joint and allow a swiveling connection between the door and the carcass. The visible hinge barrel with decorative end pieces emphasizes the classic design and adds stylish accents to cabinets, chests of drawers and display cabinets.
Made of robust brass, the Gedotec furniture hinge impresses with its high material quality and good corrosion resistance. The six pre-drilled, countersunk fixing holes allow for easy and neat screw mounting on suitable furniture parts. Thanks to the straight, flat hinge leaves, the decorative hinge is particularly suitable for classic furniture constructions with inset doors.
Scope of delivery:
1 piece - furniture hinge
from
€3.50*
Gedotec furniture hinge 111 made of brass 50 x 40 mm, with vertical adjustment
Gedotec furniture hinge 111 made of brass 50 x 40 mm, with vertical adjustment
The Gedotec furniture hinge 111 is a high-quality and functional furniture fitting made of robust brass profile, combining reliable hinge function with practical adjustability. With its dimensions of 50 x 40 mm, the furniture hinge is ideal for mounting cabinet doors, furniture doors and smaller furniture flaps. Its classic design makes it versatile for use in furniture construction, interior finishing, as well as in the repair and restoration of existing wooden furniture.
The furniture hinge features two flat hinge leaves connected by a centrally positioned pivot joint. This design enables smooth swinging movement and convenient opening and closing of the furniture door. Particularly practical is the integrated vertical adjustment option via side cut-outs. This allows the door position to be adjusted in height during installation to compensate for minor deviations and align the furniture door precisely with the cabinet body.
Made from high-quality brass profile, the Gedotec furniture hinge impresses with its stable construction and good corrosion resistance. The four pre-drilled, countersunk fixing holes allow for easy and neat screw mounting on the intended furniture parts. The compact design and classic brass appearance make the hinge a functional and visually appealing solution for a wide range of furniture constructions.
Scope of delivery:
1 piece - furniture hinge
€2.21*
Gedotec Decorative Hinge 133 made of brass with decorative barrel, rebated
Gedotec Decorative Hinge 133 made of brass with decorative barrel, rebated
The Gedotec Decorative Hinge 133 is a high-quality and decorative furniture hinge made of brass that combines classic elegance with reliable functionality. With its cranked hinge leaves and the attractively shaped decorative barrel, this furniture hinge is particularly suitable for traditional wooden furniture, antique cabinets and stylish interior concepts. The decorative ends give the fitting a timeless character and make it an attractive design element on visible furniture hinges.
The decorative hinge was specially developed for rebated or half-rebated furniture doors, where the door leaf has a stepped edge and, when closed, lies partly within the furniture carcass. The cranked hinge leaves allow suitable mounting on this special door construction. The centrally positioned pivot joint ensures the swivelling connection between door and carcass and enables convenient opening and closing.
Particularly characteristic is the visible hinge barrel with decoratively shaped end pieces, which gives the furniture fitting a classic and elegant appearance. Made of robust brass, the decorative hinge impresses with its high material quality and good corrosion resistance. The six pre-drilled, countersunk fixing holes allow simple and neat screw mounting on the intended furniture parts.
Scope of delivery:
1 piece - furniture hinge
from
€3.81*
Gedotec Decorative Hinge 133 made of brass with decorative barrel
Gedotec Decorative Hinge 133 made of brass with decorative barrel
The Gedotec Decorative Hinge 133 is a high-quality and decorative furniture hinge made of brass that combines reliable hinge function with a classic, elegant appearance. With its straight hinge leaves and the artistically designed decorative barrel, this furniture hinge is especially suitable for traditional wooden furniture, antique cabinets and stylish interior concepts. The decorative end pieces give the hinge a timeless character and make it an attractive design element on visible furniture fittings.
The decorative hinge was specially developed for inset furniture doors, where the door panel sits within the furniture carcass when closed. The two flat hinge leaves are connected by a central pivot joint and allow a smooth swinging movement of the door. The visible decorative barrel with shapely end pieces emphasizes the traditional character and adds decorative accents to cabinets, display cases and chests of drawers.
Made of robust brass, the Gedotec furniture hinge impresses with its high material quality and good corrosion resistance. The six pre-drilled, countersunk fixing holes allow easy and neat screw mounting on suitable wooden surfaces. The flat hinge leaves ensure a classic and functional fastening.
Scope of delivery:
1 piece - furniture hinge
from
€2.88*
Gedotec decorative hinge BAROCK made of brass with decorative roller
Gedotec decorative hinge BAROCK made of brass with decorative roller
The Gedotec decorative hinge BAROCK is a decorative furniture hinge made of high-quality brass that combines classic elegance with practical functionality. Inspired by the opulent Baroque style, this decorative hinge is especially suitable for traditional furniture, antique cabinets and stylish wooden furniture. Its characteristic design makes the furniture fitting a decorative element that visually enhances furniture pieces and emphasizes their classic character.
The decorative hinge was specially developed for inset furniture doors, where the door leaf sits within the furniture carcass when closed. The movable hinge connection enables comfortable opening and closing of the door. Thanks to its decorative design, the brass hinge is particularly suitable for furniture constructions in which visible fittings are deliberately used as a design element.
Made of solid brass, the Gedotec decorative hinge BAROCK impresses with its high material quality and elegant appearance. Brass is characterized by its good corrosion resistance and is ideal for durable, decorative furniture fittings. The classic design harmonizes especially well with natural wooden surfaces, historic furniture and interiors in vintage or country style.
Scope of delivery:
1 piece - furniture hinge
from
€4.51*
Gedotec Decorative Hinge BAROCK made of brass with decorative barrel, rebated bronze
Gedotec Decorative Hinge BAROCK made of brass with decorative barrel, rebated bronze
The Gedotec BAROCK decorative hinge is a high-quality and decorative furniture hinge made of brass that combines classic elegance with reliable functionality. With its elaborately designed decorative barrel in the traditional Baroque style, the hinge is particularly suitable for antique furniture, rustic wooden furniture and stylish interior concepts. The decorative design gives cabinet doors and furniture pieces an elegant, historical character.
The decorative hinge was specially developed for rebated furniture doors and features a double rebate of 12 mm on each side. It is suitable for door constructions in which the door leaf and furniture carcass are connected via correspondingly stepped edges. The angled hinge leaves allow suitable mounting on rebated furniture parts, while the centrally positioned pivot joint ensures the swiveling connection between door and carcass.
Particularly characteristic is the artistically shaped, visible decorative barrel with decorative ends on both sides. This emphasizes the traditional Baroque style and makes the furniture hinge an attractive design element. Made of brass, the fitting offers high material quality and good corrosion resistance. The pre-drilled, countersunk fixing holes enable simple and neat screw mounting.
Scope of delivery:
1 piece - furniture hinge
from
€4.36*
Gedotec Surface-Mounted Hinge 399 made of Steel
Gedotec Surface-Mounted Hinge 399 made of Steel
The Gedotec surface-mounted hinge 399 is a robust and functional furniture fitting for the installation of inset cabinet and furniture doors. Made of sturdy iron, this furniture hinge is ideal for furniture construction, interior finishing, as well as for the repair and retrofitting of existing furniture pieces. Its compact design and classic hinge construction provide reliable and practical fastening for movable furniture doors.
The surface-mounted hinge was specially developed for inset doors, where the door leaf sits within the furniture carcass. The two elongated hinge leaves each have three oval fixing holes, which allow horizontal adjustment during installation. This makes it possible to adjust the position of the furniture door and align it precisely with the furniture carcass. The countersunk screw holes support a clean and flush screw connection.
The sturdy metal construction with a classic pivot joint enables smooth swinging movement of the furniture door. Thanks to the simple screw-on installation, the hinge can be mounted on suitable furniture surfaces without the need for complex recesses. The different surface finishes also allow suitable coordination with various furniture styles and existing fittings.
Scope of delivery:
1 set - furniture hinge
from
€2.50*
Gedotec cup hinge TELESE Ø 27 mm for rebated doors with visible barrel 5.8 mm gap, antique burnished
Gedotec cup hinge TELESE Ø 27 mm for rebated doors with visible barrel 5.8 mm gap, antique burnished
The Gedotec TELESE cup hinge is a decorative and functional furniture fitting for mounting rebated cabinet and furniture doors. With a cup diameter of 27 mm and a visible hinge barrel, this furniture hinge combines reliable hinge function with a classic, elegant appearance. It is ideal for furniture making, interior fitting, as well as for the restoration and retrofitting of traditional furniture pieces.
The cup hinge was specially developed for rebated furniture doors, where the door leaf has a stepped edge and, when closed, lies partly within the furniture carcass. The visible hinge barrel with decorative end pieces gives the fitting a distinctive appearance and makes it particularly interesting for classic, rustic and antique furniture constructions. The hinge is designed for a 5.8 mm gap.
The cup with a diameter of 27 mm is mounted in a corresponding bore in the door leaf. The matching mounting plate for fastening to the furniture carcass is already included in the scope of delivery. Pre-drilled fixing holes and slotted holes make screwing easier and allow precise positioning of the furniture door. The sturdy metal construction ensures a reliable connection and smooth pivoting movement.
Scope of delivery:
1 set - furniture hinge incl. mounting plate
€8.03*
Gedotec cup hinge KARIN for rebated doors with visible barrel, antique burnished
Gedotec cup hinge KARIN for rebated doors with visible barrel, antique burnished
The Gedotec cup hinge KARIN is a functional and decorative furniture fitting for mounting rebated cabinet and furniture doors. Thanks to its special design with a visible decorative barrel, the furniture hinge combines reliable hinge function with a classic, elegant look. It is ideal for furniture making, interior finishing, as well as for the restoration and retrofitting of traditional furniture pieces.
The cup hinge was specially developed for rebated furniture doors, where the door leaf has a stepped edge and partially projects into the furniture carcass. The visible hinge barrel with a diameter of 8 mm forms the pivot axis and gives the fitting a distinctive appearance thanks to its decorative end pieces. This makes the hinge particularly suitable for furniture constructions where the hinge barrel is intended to remain visible as a design element.
The sturdy hinge construction enables a reliable connection between the furniture door and the carcass. Thanks to the included mounting plate, the cup hinge can be attached to the intended furniture construction. The integrated fixing holes and adjustment options make installation easier and support precise alignment of the door.
Scope of delivery:
1 set - furniture hinge incl. mounting plate
€6.01*
Gedotec Furniture hinge made of metal with Ø 9 mm decorative barrel, for rebated doors
Gedotec furniture hinge made of metal with Ø 9 mm decorative barrel, for rebated doors
The Gedotec furniture hinge with decorative barrel is a high-quality furniture fitting made of robust Zamak (zinc die-cast), specially developed for mounting overlay cabinet and furniture doors. With its classic design and elaborately shaped decorative ends, this screw-on hinge combines reliable function with an elegant, traditional look. It is ideal for furniture making, interior finishing, as well as for the restoration and retrofitting of classic furniture pieces.
The furniture hinge is designed for overlay doors, where the door leaf rests on the furniture carcass when closed. The sturdy pivot joint with a diameter of 9 mm enables a swiveling connection between the door and the carcass. The decorative barrels arranged on both sides give the hinge a distinctive appearance and make it an attractive design element on visible furniture fittings.
The integrated adjustment mechanism allows the door position to be adjusted during installation. Pre-drilled fixing holes and slotted holes make screwing easier and support precise alignment of the furniture door. The hinge is supplied fully pre-assembled, so the individual components are already connected to each other in the correct position.
Scope of delivery:
1 set - furniture hinge
from
€4.07*
Gedotec Furniture Hinge 415 made of metal, for fully inset doors
Gedotec Furniture Hinge 415 made of metal, for fully inset doors
The Gedotec Furniture Hinge 415 is a compact and functional furniture fitting made of robust metal, specially developed for mounting inset cabinet and furniture doors. Thanks to its space-saving design, this screw-on hinge is ideal for furniture construction, interior finishing, as well as for repairing and retrofitting existing furniture pieces.
The furniture hinge is designed for inset doors, where the door panel sits within the furniture carcass when closed. The special hinge design enables a pivoting connection between the door and the carcass. Its compact design also makes the furniture fitting suitable for smaller cabinet constructions and limited space conditions.
The pre-drilled fixing holes allow for easy screw-on installation on the intended furniture parts. The stable zinc die-cast construction ensures a reliable mechanical connection and supports long-lasting hinge performance. The different surface finishes also make it possible to choose the fitting to match the respective furniture style.
Scope of delivery:
1 set - furniture hinge
from
€1.60*
Gedotec Screw-on Hinge 241 for Overlay Doors with Base Plate
Gedotec Screw-on Hinge 241 for Overlay Doors with Base Plate
The Gedotec screw-on hinge 241 is a functional and robust furniture fitting for mounting overlay cabinet and furniture doors. Thanks to its stable construction with integrated base plate and practical adjustment option, this furniture hinge is ideal for furniture making, interior fitting, as well as for repairing and retrofitting existing furniture pieces.
The screw-on hinge was specially developed for overlay furniture doors, where the door leaf rests on the furniture carcass when closed. The integrated base plate enables reliable fastening to the furniture carcass, while the moving hinge part ensures controlled pivoting of the door. Thanks to the visible adjustment screw and the adjustment mechanism, the position of the furniture door can be adapted during installation and aligned precisely.
The compact design with several pre-drilled fixing holes enables straightforward screw-on installation. The sturdy metal construction ensures a reliable connection between the door and the furniture carcass. Thanks to the different surface finishes, the hinge can be harmoniously combined with classic furniture fittings and various interior styles.
Scope of delivery:
1 set - furniture hinge
from
€3.12*
Gedotec furniture hinge 415 made of metal for fully recessed doors with 110° opening limit, bronze
Gedotec furniture hinge 415 made of metal for fully recessed doors with 110° opening limit, bronze
The Gedotec furniture hinge 415 is a compact and functional furniture fitting made of robust metal, specially developed for mounting inset cabinet and furniture doors. Thanks to its space-saving design, the screw-on hinge is ideal for furniture construction, interior finishing, as well as for the repair and retrofitting of existing furniture pieces.
The furniture hinge is designed for inset doors, where the door panel sits within the furniture carcass when closed. The special hinge design enables a pivoting connection between the door and the carcass. Its compact design also makes the furniture fitting suitable for smaller cabinet constructions and limited installation spaces.
The pre-drilled fixing holes allow for easy screw-on installation on the intended furniture parts. The sturdy zinc die-cast construction ensures a reliable mechanical connection and supports long-lasting hinge performance. The different surface finishes also make it possible to choose the fitting to match the respective furniture style.
Scope of delivery:
1 set - furniture hinge
€1.60*
Gedotec flap hinge 231 made of metal with decorative roller, Ø 35 mm
Gedotec flap hinge 231 made of metal with decorative roller, Ø 35 mm
The Gedotec flap hinge 231 with decorative roller is a high-quality furniture fitting made of robust metal for mounting inset cabinet and furniture doors. With its classic design featuring rounded hinge leaves and elegant decorative ends, this furniture hinge combines reliable function with an elegant, traditional look. It is ideal for furniture making, interior finishing, and the restoration of classic furniture pieces.
The flap hinge is specially designed for inset furniture doors, where the door panel sits within the furniture carcass. The sturdy pivot joint with a diameter of 9 mm enables a swiveling connection between the door and the furniture carcass. The decorative rollers attached on both sides give the hinge a decorative appearance and make it an attractive design element on visible furniture fittings.
The pre-drilled, countersunk fixing holes allow for easy and neat screw-on installation. The compact design is particularly suitable for smaller furniture doors, cabinet fronts, and furniture flaps. Thanks to the different surface finishes, the hinge can be harmoniously combined with classic, rustic, and antique furniture styles.
Scope of delivery:
1 set - furniture hinge
from
€2.38*
Gedotec flap hinge 231 made of metal, Ø 35 mm
Gedotec flap hinge 231 made of metal, Ø 35 mm
The Gedotec flap hinge 231 is a compact and functional furniture fitting made of robust metal, specially developed for mounting inset cabinet doors and flaps. Thanks to its stable construction and space-saving design, the furniture hinge is ideal for furniture making, interior finishing, as well as for the repair and retrofitting of existing furniture pieces.
The flap hinge features a centrally positioned pivot joint with a diameter of 6 mm, which enables a swiveling connection between the two hinge parts. The specially shaped hinge wings are designed for inset doors, where the door panel sits within the furniture carcass. Due to its compact design, the fitting can also be used where space is limited.
The integrated recessed fixing holes allow for simple and neat screw mounting on the intended furniture parts. The robust Zamak construction provides a reliable mechanical connection and supports long-lasting operation of the flap mechanism. The dark surface also ensures a discreet appearance and can be harmoniously combined with different furniture surfaces.
Scope of delivery:
1 set - furniture hinge
€0.70*
Gedotec Decorative Hinge LILIE made of black steel, 87 - 168 mm
Gedotec Decorative Hinge LILIE made of black steel, 87 - 168 mm
The Gedotec decorative hinge LILIE is a decorative furniture hinge made of robust iron that combines a functional hinge connection with a traditional, rustic look. Its curved shape with lily-shaped ends makes this decorative hinge especially suitable for country-style furniture, antique furniture, and rustic wood and interior constructions.
The decorative hinge has two symmetrically shaped hinge leaves connected by a centrally positioned pivot joint. This design enables a swiveling connection between two components and is suitable for mounting on smaller wooden doors, cabinet doors, chests, and furniture flaps. The decorative design also makes the hinge a stylish decorative element that visually enhances visible furniture fittings.
The pre-drilled fixing holes allow for easy screw mounting on suitable wooden surfaces. Thanks to its sturdy iron construction, the furniture hinge provides a reliable connection for moving components. The dark surface emphasizes the classic character and harmonizes especially well with natural wood surfaces and rustic furniture fittings.
Scope of delivery:
1 set - furniture hinge
from
€2.00*
Gedotec Slide Bolt BERTHOLD made of steel, 80 mm
Gedotec Slide Bolt BERTHOLD made of steel, 80 mm
The Gedotec slide bolt BERTHOLD is a robust and decorative locking bolt for doors, cabinets and furniture. Made of sturdy iron, this compact furniture bolt is ideal for easily securing cabinet doors, furniture doors, flaps and other wooden constructions. With dimensions of 80 x 38 mm, the slide bolt offers a space-saving and functional solution for a wide range of applications in furniture making and interior fitting.
The slide bolt features a smooth-running sliding mechanism that allows doors and flaps to be opened and locked by simply sliding the bolt. The attractively shaped base plate with curved contours and pre-drilled fixing holes enables straightforward screw mounting on suitable surfaces. The wide handle makes manual operation easier and emphasizes the traditional appearance of the fitting.
Thanks to its decorative design, the Gedotec slide bolt BERTHOLD is particularly suitable for furniture in a classic, rustic or vintage style. The different surface finishes allow harmonious coordination with existing furniture fittings and individual interior styles. Whether for wooden cabinets, chests of drawers, trunks or smaller doors - the iron bolt combines practical locking function with an appealing look.
Scope of delivery:
1 set - slide bolt
from
€1.00*
Gedotec Scissor Hinge PREMIUM made of brass for flaps and desk tops, 130 mm
Gedotec Scissor Hinge PREMIUM made of brass for flaps and desk tops, 130 mm
The Gedotec Scissor Hinge PREMIUM is a high-quality furniture fitting made of brass for foldable furniture constructions, drop-fronts and desk tops. With a length of 130 mm, the scissor hinge is ideal for furniture making, interior finishing and custom furnishing solutions with movable flaps. The elegant brass surface gives the fitting a premium look and harmonizes particularly well with classic and stylish furniture pieces.
The scissor hinge enables the pivoting connection of two furniture parts and is specially designed for flaps and downward-opening drop-fronts. Thanks to its articulated construction, flaps can be moved in a controlled manner and brought into an open position. This makes the fitting suitable, for example, for secretaire desks, writing cabinets, folding desks and other furniture with fold-out work or storage surfaces.
The elongated design with several recessed fixing holes allows easy and neat screwing to the respective furniture parts. The robust brass fitting impresses with its high-quality workmanship and offers a durable solution for functional folding mechanisms. The compact, slim construction can be integrated unobtrusively into a wide range of furniture projects.
Scope of delivery:
1 set - scissor hinge
€20.35*
Gedotec Pivot Hinge made of steel with round plate and curved guide
Gedotec Pivot Hinge made of steel with round plate and curved guide
The Gedotec pivot hinge with round plate and curved guide is a robust and functional hardware solution for pivot-mounted furniture and door constructions. Made of sturdy steel with a galvanized surface, the pivot hinge is ideal for furniture making, interior construction, and custom designs with a special pivot bearing.
The pivot hinge consists of an elongated mounting bracket with an eccentrically positioned pivot pin and a round guide plate with curved slots. The special S-shaped guide allows flexible positioning and adjustment of the components during installation. Several pre-drilled mounting holes ensure easy screwing to the intended furniture and construction parts.
Thanks to the eccentrically positioned pivot pin, the pivot fitting enables a rotational movement around an offset axis. In contrast to conventional furniture hinges, this design offers an alternative pivot bearing that can be used especially for special swing mechanisms and individually manufactured furniture constructions. The round mounting plate with curved guide makes it easier to adjust the installation position.
Scope of delivery:
1 set - pivot hinge
€5.40*
Gedotec Pivot hinge made of steel with square plate and curved guide
Gedotec Pivot hinge made of steel with square plate and curved guide
The Gedotec pivot hinge with square plate and curved guide is a robust and functional hardware solution for pivot-mounted furniture and door constructions. Made of sturdy steel with a galvanized surface, the pivot hinge is ideal for furniture making, interior finishing, and custom constructions with a special pivot bearing.
The pivot hinge consists of an elongated mounting bracket with an eccentrically arranged pivot pin and a square guide plate with a curved slot. The special S-shaped guide allows an adapted positioning of the pivot point and offers additional adjustment options during installation. Pre-drilled mounting holes make screwing it onto the intended furniture or construction parts easier.
Due to the eccentric arrangement of the pivot pin, the pivot fitting enables a rotational movement around an offset axis. In contrast to classic furniture hinges, this design is particularly suitable for special swivel and pivot mechanisms where an individual positioning of the pivot axis is required.
Scope of delivery:
1 set - Pivot hinge
€5.28*
Gedotec Pivot Hinge made of steel with square plate and straight guide
Gedotec Pivot Hinge made of steel with square plate and straight guide
The Gedotec pivot hinge with square plate and straight guide is a robust and functional hardware solution for pivot-mounted doors and furniture constructions. Made of sturdy, galvanized steel, the pivot hinge is ideal for furniture making, interior finishing, and custom constructions with a pivot point.
The pivot hinge consists of an elongated bearing fitting with an eccentrically arranged pivot pin and a square guide plate with straight slotted holes. This design allows the components to be positioned and adjusted during installation. The pre-drilled fixing holes ensure easy screwing to the intended mounting surfaces.
Unlike conventional furniture hinges, a pivot fitting enables rotational movement around a defined pivot point. This makes the hinge suitable for special door and furniture constructions where an alternative pivot bearing is required. The eccentric arrangement of the pivot pin offers additional options for the structural positioning of the pivot axis.
Scope of delivery:
1 set - Pivot hinge
€5.11*
Gedotec Corner Connector CARLOS made of steel 105 x 72 x 32 mm, with M8 mount
Gedotec Corner Connector CARLOS made of steel, with M8 mount
The Gedotec corner connector CARLOS is a sturdy and versatile furniture connector for secure fastening of furniture feet and for connecting furniture constructions. Made of robust iron with a galvanized surface, the corner fitting is ideal for furniture construction, furniture assembly, as well as for the repair and retrofitting of existing furniture pieces.
Thanks to its angled, triangular reinforced construction, the furniture angle enables a stable connection in the corner area of furniture frames and substructures. The integrated M8 threaded mount is used for easy installation of suitable furniture feet with M8 threaded bolts. This makes it easy to attach furniture legs and leveling feet and replace them if needed.
The corner connector has several pre-drilled mounting holes that allow easy screwing to the adjacent furniture components. The sturdy metal construction supports reliable force transmission, while the galvanized surface provides additional protection against corrosion and contributes to the durability of the fitting.
Scope of delivery:
1 piece - corner connector
€1.20*
Gedotec Screw Cover made of steel, polished brass-plated Ø 16 mm
Gedotec Screw Cover made of steel, polished brass-plated Ø 16 mm
The Gedotec screw cover with brass-plated surface is a decorative and practical solution for elegantly concealing visible screw heads. The combination of a countersunk washer and a domed cover cap ensures a clean, high-quality finish and is ideal for furniture construction, interior finishing, as well as decorative fixings on wooden surfaces and other materials.
The round screw cover cap with a diameter of 16 mm impresses with its domed shape and shiny brass look. It conceals the screw head underneath and gives visible screw connections an attractive, decorative appearance. Especially on furniture, wall paneling, decorative moldings, and other visible screw joints, the cover cap offers a stylish way to enhance functional fixings visually.
Installation is carried out using the matching countersunk washer, which is designed for countersunk screws with a diameter of 4.5 mm. After fastening, the domed cover cap is placed on top and reliably conceals the screw. The shiny, brass-plated surface harmonizes particularly well with classic furniture fittings and decorative interior elements.
Scope of delivery:
1 piece - screw cover
€0.40*
Gedotec Screw-on Plate made of Steel, M8 - M10
Gedotec Screw-on Plate made of Steel, M8 - M10
The Gedotec screw-on plate is a practical and robust fastening solution for mounting table legs, furniture feet and other furniture components. Made of sturdy iron with a tropicalized surface, the threaded plate is ideal for furniture construction, furniture assembly as well as the repair and retrofitting of existing furniture pieces.
The round mounting plate has three pre-drilled screw holes that allow easy and reliable fastening to the underside of tabletops, cabinets or other furniture constructions. The centrally positioned internal thread allows suitable threaded bolts to be fitted and ensures a stable connection between the furniture piece and the table leg or furniture foot.
The screw-on plate is available with either M8 or M10 internal thread and can therefore be used flexibly for different furniture projects. The tropicalized surface treatment provides additional corrosion protection and supports a long service life of the metal fitting.
Whether for building custom tables, replacing damaged furniture feet or assembling new furniture constructions, the threaded plate with 3-hole fastening offers a straightforward and functional solution for secure screw fastening.
Scope of delivery:
1 piece - screw-on plate
from
€0.25*
ALOIS cabinet hanger made of steel, for hanging
Gedotec ALOIS cabinet hanger made of steel, for hanging
The Gedotec ALOIS cabinet hanger is a robust and practical fastening solution for secure wall mounting of wall cabinets and other furniture constructions. Made of sturdy iron with a galvanized surface, the furniture hanger is ideal for use in furniture making, interior finishing, and when installing kitchen and wall cabinets.
The cabinet hanger has a fixed, non-adjustable design and is specifically intended for hanging into suitable screw hooks. The multiple pre-drilled fixing holes allow easy screwing to the furniture carcass and ensure a reliable connection. Thanks to its angled design, the hanging bracket can be mounted on the cabinet structure in a space-saving way.
The furniture hanger is available in either a left-hand or right-hand version, allowing suitable installation on the respective cabinet side. The galvanized surface protects the iron from corrosion and supports a long service life of the fitting.
Scope of delivery:
1 piece - cabinet hanger
from
€0.40*
Gedotec Cabinet Hanger 207 made of steel, adjustable
Gedotec Cabinet Hanger 207 made of steel, adjustable
The Gedotec Cabinet Hanger 207 is a practical and reliable fastening solution for wall mounting of wall cabinets and other furniture constructions. Made of robust iron with a galvanized surface, the adjustable furniture hanger is ideal for use in furniture making, interior finishing, and when installing kitchen and wall cabinets.
The cabinet hanger is designed to be hooked into suitable screw hooks and enables a functional connection between the furniture piece and the wall fixing. Thanks to the integrated slotted hole, the position of the hanger can be adjusted during installation. This allows minor positioning deviations to be compensated for and wall cabinets to be aligned precisely.
The sturdy metal construction ensures reliable fastening, while the galvanized surface provides additional protection against corrosion. The compact design allows space-saving integration into different cabinet constructions.
Scope of delivery:
1 piece - cabinet hanger
€1.00*
Gedotec Door Bolt EISENSTADT made of steel or stainless steel
Gedotec Door Bolt EISENSTADT made of steel or stainless steel
The Gedotec door bolt EISENSTADT is a simple and reliable solution for additionally securing doors. The classic slide bolt is easy to operate and is ideal for various door and flap applications in private or functional settings.
With its angular, straight-lined shape, the door bolt looks plain and unobtrusive. The 17 mm width allows for compact installation and makes the bolt particularly suitable for applications where space is limited.
It is fastened directly with screws and can be installed quickly and easily. The required fixing screws are not included in the scope of delivery, so suitable screws can be selected depending on the door material and door frame.
The door bolt is suitable for anyone who wants to additionally secure doors, flaps or similar components in a straightforward way. Thanks to its simple mechanical function, the bolt is robust, functional and versatile.
Scope of delivery:
1 piece - door bolt without screws
from
€3.57*
Gedotec Surface-Mounted Hinge ADELHEID with Decorative Head made of Metal
Gedotec Surface-Mounted Hinge ADELHEID with Decorative Head made of Metal
The Gedotec surface-mounted hinge ADELHEID combines a functional hinge design with a decorative, classically inspired appearance. The version with decorative head gives the hinge a special visual accent and makes it ideal for furniture, flaps, doors, or other visible applications where the fitting is intended to be part of the design.
The surface-mounted hinge is made of zamak, a robust and dimensionally stable metal material that is particularly well suited for durable hardware solutions. The removable steel pin allows practical handling and makes installation, removal, or maintenance of the hinge easier.
Thanks to its visible, decorative design, the Gedotec ADELHEID is especially suitable for classic, rustic, traditional, or vintage-inspired furniture concepts. The decorative head emphasizes the handcrafted character and makes the hinge a suitable choice for chests, cabinets, flaps, small doors, and individually made furniture pieces.
Scope of delivery:
1 piece - surface-mounted hinge
from
€1.92*
Gedotec Surface-Mount Hinge BRUNHILD made of metal, 40 x 54 mm
Gedotec Surface-Mount Hinge BRUNHILD made of metal, 40 x 54 mm
The Gedotec surface-mount hinge BRUNHILD is a practical and durable solution for visible hinge connections on furniture, flaps, small doors and other constructions. Thanks to the classic screw-on installation, the hinge can be attached easily and directly to the surface, making it particularly suitable for numerous applications in furniture making and interior construction.
The surface-mount hinge is made of Zamak, a robust and dimensionally stable metal material known for its good resistance and long service life. The removable steel pin makes installation, removal and maintenance easier and ensures practical handling in everyday use.
In terms of style, the hinge looks simple, functional and timeless. This means it can be combined with both modern and classic or more rustic furniture concepts. It is particularly suitable for cabinets, chests, flaps, small furniture doors and custom-made wooden constructions.
Scope of delivery:
1 piece - surface-mount hinge
from
€2.30*
Gedotec Door Chain MANFRED made of steel black for screw mounting
Gedotec Door Chain MANFRED made of steel black for screw mounting
The Gedotec door chain MANFRED is a stable and reliable security solution for house, apartment and other access doors. It allows a door to be opened only a small crack at first, providing additional control before the door is fully opened.
Made of high-quality steel and equipped with a welded steel chain, the door chain impresses with its robust, durable construction. The sturdy design is intended for regular use and is ideal for additional securing of different door types.
The security chain can be mounted quickly and easily. All required fastening parts are already included in the scope of delivery, so installation can be carried out immediately. Thanks to its versatile design, the door chain can be used on various doors.
In terms of style, the door chain appears functional, discreet and classic. It blends subtly into different door designs and is suitable both for private living areas and for other interior spaces where additional door security is desired.
Scope of delivery:
1 piece - door chain incl. fastening material
€4.43*
Gedotec Door Knocker FRIEDOLIN made of steel black for through-bolting
Gedotec Door Knocker FRIEDOLIN made of steel black for through-bolting
The Gedotec door knocker FRIEDOLIN is a robust and stylish solution for classic entrance doors and front doors. Made of steel, the door knocker impresses with its high mechanical resistance and is ideal for regular use in the entrance area.
Thanks to its clear, traditional design language, the door knocker blends harmoniously into a wide variety of door designs. It is particularly well suited to solid wooden doors, classic front doors and entrance areas with a timeless or rustic character. At the same time, the door knocker adds a decorative accent without appearing too dominant.
The sturdy steel construction ensures durable and reliable function. At the same time, the door knocker offers a classic alternative or complement to the doorbell and produces a clearly audible signal when knocked.
For easy installation, FRIEDOLIN is supplied including suitable mounting accessories. This makes it easy and secure to mount the fitting on the intended entrance door.
Scope of delivery:
1 piece - door knocker incl. mounting material
€16.85*
Gedotec Door Viewer HANNING made of brass, Ø 14 mm door thickness 35 - 110 mm
Gedotec Door Viewer HANNING made of brass, Ø 14 mm door thickness 35 - 110 mm
The Gedotec door viewer HANNING is a discreet and practical security solution for house, apartment and access doors. Thanks to the super wide-angle lens, the door viewer provides a particularly large field of view and makes it easier to recognize people on the other side of the door at an early stage. This allows you to better assess who is standing in front of the door before opening it.
The door viewer is suitable for use on interior and exterior doors and blends unobtrusively into the door surface thanks to its compact design. With a diameter of 14 mm, the appearance remains discreet and functional. The integrated cover makes it possible to close the viewer when not in use, providing additional privacy.
The scratch-resistant surface reduces the risk of damage in daily use and contributes to a permanently clean appearance. The HANNING is easy to use and therefore suitable for all members of a household.
The door viewer is especially useful for families, households with children and older people who value additional control before opening the door. Thanks to the wide viewing angle, the door viewer increases security in an unobtrusive and effective way.
Scope of delivery:
1 piece - door viewer
from
€6.55*
Gedotec Door Knocker ANNEGRET made of steel black for screw mounting
Gedotec Door Knocker ANNEGRET made of steel black for screw mounting
The Gedotec door knocker ANNEGRET combines a distinctive, rustic look with a robust and durable construction. Made of steel and zamak, the door knocker appears solid, high-quality and full of character. Its classic design makes it a decorative eye-catcher on front doors and entrance doors.
Thanks to its rustic style, the door knocker is particularly well suited for traditional, classic or country-inspired door designs. It harmonizes perfectly with wooden doors, historic door designs and entrance areas where visible fittings are deliberately used as a design element.
The combination of steel and zamak ensures high mechanical resistance and makes the door knocker suitable for regular use on entrance doors. In addition to its decorative effect, it reliably fulfills its classic function as an acoustic door signal.
For uncomplicated installation, ANNEGRET is supplied including fixing accessories. This allows the fitting to be mounted quickly and securely on the intended door.
Scope of delivery:
1 piece - door knocker incl. fixing material
€14.88*
Gedotec ARTVIN pedal bin made of steel or stainless steel, 30l
Gedotec ARTVIN pedal bin made of steel or stainless steel, 30l
The Gedotec pedal bin ARTVIN combines generous capacity with a modern, high-quality look. With a volume of 30 liters, the waste bin is ideal for kitchens, offices, break rooms or other indoor areas where larger amounts of waste are regularly generated.
The housing is made of high-quality steel and has an easy-care surface that is resistant to fingerprints and stains. This keeps the bin cleaner and well maintained for longer, even with frequent use. The black plastic base creates a subtle contrast to the steel and rounds off the modern appearance.
The sturdy steel lid is equipped with a soft-close function. This means the lid closes gently and quietly, providing additional comfort in everyday use. The pedal allows the bin to be opened conveniently without having to touch the lid by hand.
Inside there is a removable plastic inner bin, which makes emptying and cleaning particularly easy. This makes the ARTVIN clean and convenient to use in everyday life.
Scope of delivery:
1 piece - waste bin
from
€62.61*
Gedotec Triple Waste Bin RECIK with Pedal 600 x 370 x 490 mm, 3 x 15l
Gedotec Triple Waste Bin RECIK with Pedal 600 x 370 x 490 mm, 3 x 15l
The Gedotec RECIK triple waste bin offers a convenient and clear solution for separate waste collection in the home, office or other indoor areas. With three separate containers, different types of waste can be easily separated and neatly organized.
The housing is made of high-quality steel and features a low-maintenance surface that is resistant to fingerprints and stains. This keeps the waste bin looking clean and attractive even with regular use. The black plastic lid and the equally black plastic base provide a modern, subtle contrast.
With a total capacity of 45 liters, divided into 3 x 15 liters, the RECIK is ideal for practical waste separation, for example for residual waste, packaging and paper. Inside are three removable plastic containers with carrying handles, which make emptying and cleaning particularly convenient.
For hygienic operation, the triple waste bin is equipped with a foot pedal. This allows the lid to be opened comfortably without having to touch it by hand. This makes the waste bin particularly practical for everyday use in the kitchen, office, lounge or other communal areas.
Scope of delivery:
1 piece - waste bin
from
€117.38*
Gedotec Step Trash Can LINEA made of polished stainless steel, 3l
Gedotec Step Trash Can LINEA made of polished stainless steel, 3l
The Gedotec step trash can LINEA is a compact and elegant solution for bathrooms, guest toilets and other smaller rooms. With a capacity of 3 liters, this waste bin is ideal for everyday use without taking up unnecessary space. The clear shape and the surface made of high-quality, polished stainless steel give the bin a modern and well-kept appearance.
Inside there is a removable inner bucket, which makes emptying and cleaning particularly easy. The integrated metal handle makes it easier to remove the container and ensures comfortable handling in everyday use.
For hygienic operation, the LINEA is equipped with a non-slip rubber pedal and step-on system. This allows the lid to be opened conveniently with the foot without having to touch the bin by hand. The robust opening mechanism ensures smooth, easy and reliable operation.
Thanks to its compact design, the LINEA step trash can is particularly suitable as a bathroom bin, cosmetic bin or small waste bin for toilets, offices or other indoor areas.
Scope of delivery:
1 piece - waste bin
€12.05*
Gedotec Step Trash Can TACTO made of steel black, 3l
Gedotec Step Trash Can TACTO made of steel black, 3l
The Gedotec step trash can TACTO is a modern and space-saving solution for bathrooms, guest toilets and other smaller indoor areas. With a capacity of 3 liters, the compact waste bin is ideal for everyday use, while the black lacquered steel housing provides an elegant and contemporary look.
A particularly characteristic feature is the extra flat lid with integrated soft-close damping. This allows the lid to close gently and almost silently, significantly increasing ease of use in everyday life. At the same time, the flat design ensures a particularly clean, minimalist appearance.
For hygienic and convenient use, the TACTO is equipped with a step-on foot pedal. The lid can be opened comfortably without touching the bin by hand. The robust opening mechanism ensures smooth, easy and reliable operation.
Inside there is a removable inner bin with a metal handle, which makes emptying and cleaning particularly uncomplicated. This means the step trash can can be handled quickly and cleanly in daily use..
Scope of delivery:
1 piece - waste bin
€15.50*
Gedotec HANNES lever handle pair made of aluminium, 130 x 61 mm
Gedotec HANNES lever handle pair made of aluminium, 130 x 61 mm
The Gedotec HANNES lever handle pair is a straight-lined and functional solution for modern door designs. The version without a rose provides a particularly reduced, clean look and is ideal for doors where a minimalist appearance is the focus.
Made of high-quality aluminium, the lever handle pair impresses with its robust and durable design. The material is wear-resistant, corrosion-resistant and durable, making it ideal for everyday use in private or commercial settings.
The door handle set is suitable for door thicknesses up to 65 mm and is mounted with an 8 mm square spindle. This makes the HANNES versatile for use on different interior doors. A matching Allen key is included for easy installation.
In terms of style, the lever handle pair looks modern, simple and timeless. The reduced shape without additional rose elements underlines a calm, purist door design and is particularly well suited to modern living spaces, offices and functional contract areas.
Scope of delivery:
1 pair - door handles incl. 8 mm square spindle and Allen key (without roses)
from
€11.15*
Gedotec Door Knob GABRIEL made of brass, Ø 70 mm
Gedotec Door Knob GABRIEL made of brass, Ø 70 mm
The Gedotec door knob GABRIEL combines a classic round shape with a modern, elegant design. Its harmoniously rounded silhouette gives front doors and entrance doors a high-quality yet contemporary look. The leather-tone surface creates a warm, distinctive appearance and can be especially well combined with both classic and modern door designs.
The door knob is made of brass and features a brass-coated steel substructure. Brass is particularly popular in the field of high-quality door hardware and is characterized by its long service life as well as high resistance to wear, rust, and corrosion. This makes GABRIEL ideal for frequently used doors in private and commercial settings.
With a knob diameter of 70 mm, a base diameter of 85 mm, and an overall height of 73.5 mm, the door knob has a well-proportioned, solid shape. The generous, rounded surface feels comfortable in the hand and allows for convenient gripping and operation of the door.
GABRIEL is ideal for front doors, apartment entrance doors, doors in multi-family houses, offices, and other buildings. The knob can also be used for cabinets or custom-made constructions. Its understated elegance makes it a versatile choice for different architectural and interior styles.
For easy installation, the door knob is supplied including a 90 mm M10 mounting screw and locknut. This allows the knob to be attached quickly and securely to the intended door.
Scope of delivery:
1 piece - door knob incl. mounting material
from
€16.12*
Gedotec Double Bin RECIK with Pedal 400 x 320 x 480 mm, 2 x 15 l polished stainless steel
Gedotec Double Bin RECIK with Pedal 400 x 320 x 480 mm, 2 x 15 l polished stainless steel
The Gedotec RECIK double bin combines practical waste separation with a modern, high-quality look. With its two separate compartments, this waste bin is ideal for conveniently sorting different types of waste and supports a clean, well-organized setup in the home, office, or other indoor areas.
Made of high-quality polished stainless steel, the double bin impresses with its elegant surface and robust workmanship. A special anti-fingerprint treatment reduces visible fingerprints and helps the surface look cleaner and well cared for for longer. The black plastic base creates a subtle contrast to the stainless steel and gives the bin a modern overall appearance.
The RECIK has a total capacity of 30 liters, divided into 2 x 15 liters. This makes it easy to separate residual waste and recyclables, for example. The separate compartments make the bin especially practical for kitchens, offices, break rooms, or other areas where simple waste separation is desired.
For convenient and hygienic operation, the double bin is equipped with a foot pedal. The lid can be opened without touching it by hand. This makes everyday use easier and supports clean handling of waste.
Scope of delivery:
1 piece - waste bin
€80.92*
Gedotec AMIG protective escutcheon made of brass, Ø 65 mm door thickness 40 - 45 mm
Gedotec AMIG protective escutcheon made of brass, Ø 65 mm door thickness 40 - 45 mm
The Gedotec AMIG protective escutcheon combines a robust design with a clear, timeless form language. With its round design and a diameter of 65 mm, the PZ escutcheon appears compact, high-quality and balanced. The simple design blends harmoniously into different door concepts and is suitable for both modern and classically designed entrance and interior doors.
Made of solid brass, the protective escutcheon conveys a particularly high-quality and solid impression. The material underlines the classic character of the door fitting and makes the escutcheon a suitable addition to high-quality door sets. Depending on the surface finish, the design can appear elegant and traditional or deliberately modern and understated.
The PZ protective escutcheon is intended for doors with a door thickness of 40 to 45 mm. Thanks to the round, reduced design, the lock is visually emphasized, while the escutcheon itself is discreetly and elegantly integrated into the overall appearance of the door.
Scope of delivery:
1 pair - protective escutcheon incl. fixing screws
from
€21.00*
Alberts Wheel Holder Set made of Steel with PVC Protection
Alberts Wheel Holder Set made of Steel with PVC Protection
With the Alberts wheel holder set, wheels can be stored on the wall in a space-saving, secure and tidy way. The set consists of four sturdy wheel holders made of galvanized steel and the matching concrete anchors for installation in Ø 8 mm drill holes. This makes the wheel holder ideal for storing wheels in the garage, workshop or basement.
The wall brackets made of galvanized steel are characterized by their robust and durable design. A non-slip PVC coating protects the wheel support from scratches and at the same time prevents the wheels from slipping unintentionally. This allows wheels to be stored neatly and gently while saving valuable floor space.
Each wheel holder is designed for a maximum load of 40 kg and thus provides a stable basis for wall mounting. The matching Ø 8 mm concrete anchors included in the scope of delivery enable proper fastening.
Scope of delivery:
4 pieces - wheel holder incl. Ø 8 mm concrete anchors
€19.90*
Häfele Furniture Handle H2345 made of metal, BA 128 - 160 mm
Häfele Furniture Handle H2345 made of metal, BA 128 - 160 mm
The Häfele furniture handle H2345 immediately catches the eye with its pronounced, horizontally ribbed surface. The multi-tiered line structure gives the handle a sculptural depth and a distinctive design character. At the same time, the clearly guided grip bar and the ends bent backwards at the sides create a balanced combination of decorative design and functional form.
Stylistically, the H2345 appears much more characterful than a classic, smooth bow handle. The striking grooved look is reminiscent of retro, Art Deco and mid-century inspired designs, yet thanks to its clear basic shape it can also be integrated very well into modern furniture concepts. Especially on plain fronts, the handle becomes a deliberately placed design element.
The H2345 is ideal for kitchens, dressers, sideboards, cabinets, drawers and high-quality living room furniture. The different finishes each reinforce a different style: the gold-coloured version looks warm and decorative, the glossy silver-coloured variant elegant and eye-catching, while the darker metal surface conveys a calmer, slightly industrial or vintage-inspired character.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€10.20*
Häfele furniture handle H2585 made of metal, CC 96 - 320 mm
Häfele furniture handle H2585 made of metal, CC 96 - 320 mm
The Häfele furniture handle H2585 impresses with a clear, geometric design language and a distinctive, angular look. The slim handle bar, with its precisely executed edges and straight handle ends extending backward, gives the model a modern, architectural character.
The H2585 furniture handle is ideal for modern kitchens, dressers, sideboards, cabinets, drawers and other home furniture. The handle is particularly well suited to minimalist, purist, modern and industrial-inspired interior concepts. On smooth furniture fronts, the strictly geometric shape appears especially clear and high-quality.
The different finishes create different style effects. The dark version looks striking and modern, while the silver-colored version conveys a timeless, technically elegant character. The gold-colored version combines the angular shape with a warm, high-quality appearance. The glossy version, on the other hand, adds a particularly refined and prestigious accent.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€7.60*
Häfele furniture handle H2520 made of metal, CC 96 - 192 mm
Häfele furniture handle H2520 made of metal, CC 96 - 192 mm
The Häfele furniture handle H2520 impresses with its clear, reduced form and softly rounded contours. The wide, flat grip bar appears calm and modern, while the gently rounded end faces give the design an elegant and harmonious note. Thanks to its understated shape, the handle can be combined particularly versatilely with different furniture styles.
The furniture handle is ideal for kitchens, dressers, sideboards, cabinets, drawers and other home furniture. Stylistically, it is especially suitable for modern, minimalist, timeless and elegantly furnished living areas. Depending on the finish, the handle can either blend discreetly into the overall look or act as a deliberate contrast on the furniture front.
The different finishes open up numerous design possibilities. The dark version looks modern and distinctive, while the light metal variant conveys a timeless and elegant character. The gold-colored version adds a warm, high-quality accent. Particularly full of character is the antique or textured-looking surface, which is ideal for rustic, vintage or industrial furniture. The glossy version, on the other hand, creates a particularly refined and prestigious appearance.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€7.80*
Häfele furniture handle H2590 made of metal, CC 96 - 160 mm
Häfele furniture handle H2590 made of metal, CC 96 - 160 mm
The Häfele furniture handle H2590 combines a slim, elongated shape with softly rounded transitions and a subtly offset lower contour. This creates an elegant, high-quality look that appears more classic than a strictly minimalist bar handle, while still remaining clear and modern.
The H2590 furniture handle is ideal for kitchens, dressers, sideboards, cabinets, drawers and other home furniture. It is particularly well suited to modern, timeless and elegantly furnished living spaces. The softly rounded shape creates a harmonious appearance, while the all-around line design gives the handle a subtle decorative touch.
The different finishes allow for different style effects. The dark version looks striking and modern, while the silver-coloured version appears timeless and understated. The gold-coloured version adds a warm, premium accent. Darker metal tones are ideal for homely-modern or slightly classic furniture concepts, while the glossy version looks especially refined and prestigious.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€8.80*
Häfele furniture knob H2580 made of metal, 35 x 28 mm
Häfele furniture knob H2580 made of metal, 35 x 28 mm
The Häfele furniture knob H2580 combines a classic round shape with a finely stepped edge design. The circular front appears calm and balanced, while the slightly profiled outer edge gives the knob an elegant, somewhat more decorative touch. This creates a timeless furniture knob that suits both modern and more classic furniture concepts.
The H2580 furniture knob is ideal for cabinets, chests of drawers, sideboards, drawers, kitchen furniture and bathroom furniture. Stylistically, it harmonizes particularly well with timeless, elegant, modern and classically inspired interior concepts. Thanks to its balanced shape, the knob adds a subtle accent without drawing too much attention.
The different finishes allow for different style effects. The black version looks modern and distinctive, while the silver-colored version appears timeless and understated. The gold-colored version adds a warm, elegant accent, while the glossy surface looks especially refined and prestigious.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€5.40*
Häfele furniture handle H2575 made of metal, CC 96 - 160 mm
Häfele furniture handle H2575 made of metal, CC 96 - 160 mm
The Häfele furniture handle H2575 combines a clear, straight-lined shape with pleasantly softly rounded contours. The slim handle bar looks modern and understated, while the gently upward-curved handle ends give the design an elegant, flowing note. This creates a balanced furniture handle that appears neither too strict nor too playful.
The H2575 furniture handle is ideal for modern kitchens, chests of drawers, sideboards, cabinets, drawers and other home furniture. It is particularly well suited to minimalist, modern, timeless and elegantly furnished living spaces. Thanks to its slim silhouette, the handle blends harmoniously into plain furniture fronts and emphasizes a calm, high-quality overall look.
The different finishes allow for different style effects. The dark version looks modern and distinctive, while the silver-colored version appears timeless and subtle. The gold-colored version adds a warm, elegant accent. The glossy version looks particularly refined and is ideal for high-quality or representative furniture concepts.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€7.00*
Häfele furniture knob H2570 made of oak wood, 32 x 31.5 mm
Häfele furniture knob H2570 made of oak wood, 32 x 31.5 mm
The Häfele furniture knob H2570 combines a classic round shape with the warm and natural appeal of wood. The circular front and slightly tapered body create a simple, harmonious and pleasantly homely look. The visible grain gives each furniture knob a natural character and makes it a subtle design element.
The H2570 furniture knob is ideal for cabinets, dressers, sideboards, drawers, kitchen and living room furniture. Stylistically, it is especially well suited to Scandinavian, modern, minimalist and natural interior concepts. It also blends harmoniously into timeless or slightly rustic furniture designs thanks to its clear round shape.
The two variants create different style effects. The light wood surface looks warm, friendly and natural and is especially well suited to white, beige or other light furniture fronts. The black version with visible wood structure looks more striking and modern, while retaining its natural character thanks to the visible grain.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€7.90*
Häfele furniture knob H2570 made of metal, 31.5 x 31.5 mm
Häfele furniture knob H2570 made of metal, 31.5 x 31.5 mm
The Häfele furniture knob H2570 impresses with its classic round shape and deliberately reduced design. The flat, circular front appears calm, modern and high-quality, while the slightly recessed cylindrical base creates a clear, harmonious overall form. This results in a furniture knob that blends discreetly into many different furniture concepts.
The Häfele H2570 furniture knob is ideal for cabinets, dressers, sideboards, drawers, kitchen and bathroom furniture. Stylistically, it is particularly well suited to modern, minimalist, timeless and elegantly designed interior concepts. Thanks to its simple circular shape, the knob works equally well on calm plain fronts as well as on wood decors or contrasting furniture surfaces.
The different finishes allow for different style effects. The black version looks striking and modern, the silver-coloured version more timeless and discreet. The gold-coloured version adds a warm, elegant accent, while the glossy surface appears particularly refined and prestigious.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€6.00*
Häfele furniture handle H2565 made of oak wood, center distance 128 - 160 mm
Häfele furniture handle H2565 made of oak wood, center distance 128 - 160 mm
The Häfele furniture handle H2565 combines a clear, straight-lined shape with the warm appeal of wood. The slim handle bar and the distinctly upward-turned handle ends look modern and elegant, while the visible grain gives the design a natural and homely character.
The H2565 furniture handle is ideal for kitchens, dressers, sideboards, cabinets, drawers and other home furniture. It is especially well suited to Scandinavian, modern, minimalist and natural interior concepts. Thanks to its reduced form, the handle can be combined in many ways and looks high-quality and harmonious on both light and dark furniture fronts.
The different variants create different style effects. The natural wood finish looks warm, friendly and authentic and harmonizes particularly well with white, beige and natural tones. The black version with visible wood structure looks much more distinctive and modern, yet retains its natural character thanks to the visible grain.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€14.20*
Häfele Furniture Handle H2565 made of metal, CC 96 - 160 mm
Häfele Furniture Handle H2565 made of metal, CC 96 - 160 mm
The Häfele furniture handle H2565 impresses with its clear, straight handle bar and the characteristically upward-curved handle ends. The slightly tapered side sections give the handle an elegant dynamism and ensure that the design does not appear too strict despite its reduced form.
The H2565 furniture handle is ideal for modern kitchens, chests of drawers, sideboards, cabinets, drawers and other home furniture. It harmonizes particularly well with modern, minimalist, purist and timelessly elegant interior concepts. Its slim shape looks especially calm and high-quality on smooth furniture surfaces.
The different finishes create different style effects. The dark version looks striking and modern, while the silver-colored variant appears timeless and understated. The gold-colored version adds a warm, elegant accent, while a glossy surface makes the handle look especially refined and high-quality.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€7.20*
Häfele Furniture Knob H2560 made of metal, 41 x 26 mm
Häfele Furniture Knob H2560 made of metal, 41 x 26 mm
The Häfele furniture knob H2560 combines a compact, modern shape with a striking, textured front surface. The gently curved front is complemented by a finely crafted grid-like pattern that gives the knob a special depth and a distinctive design character. The rearward rising grip section also creates a dynamic, high-quality look.
The H2560 furniture knob is ideal for cabinets, chests of drawers, sideboards, drawers, kitchen furniture and bathroom furniture. Stylistically, it is particularly well suited to modern, elegant and design-oriented interior concepts. Thanks to the combination of a clear basic shape and decorative texture, the knob creates a visible accent without appearing overloaded.
The different finishes allow for different style effects. The black version looks bold and modern, the silver-coloured version timeless and technically elegant. The gold-coloured version gives the furniture knob a warm, high-quality and somewhat more luxurious appearance.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€5.70*
Häfele edge pull handle H2550 made of aluminium, BA 32 - 320 mm
Häfele edge pull handle H2550 made of aluminium, BA 32 - 320 mm
The Häfele shell handle H2550 impresses with its clear, elongated shape and a softly rounded front edge. The flat, straight top looks modern and understated, while the gentle rounding at the front edge gives the handle a pleasantly harmonious and high-quality appearance.
The shell handle H2550 is ideal for drawers, chests of drawers, sideboards, cabinets, kitchen and bathroom furniture. Stylistically, it is particularly well suited to modern, minimalist, purist and timelessly elegant interior concepts. Thanks to its flat design, the handle blends especially discreetly into straight-lined furniture fronts.
The different finishes allow for different style effects. The black version looks striking and modern, while the silver-coloured versions appear more timeless and technically elegant. The gold-coloured version adds a warm, premium accent and is particularly well suited to more refined or high-contrast furniture concepts.
Scope of delivery:
1 piece - edge pull handle without screws
from
€4.60*
Häfele furniture knob H2545 made of metal, 40 x 31.5 mm
Häfele furniture knob H2545 made of metal, 40 x 31.5 mm
The Häfele furniture knob H2545 is characterised by its compact, gently curved front and the distinctly upward-swept grip section. The broad front appears clean and modern, while the soft transitions and subtle curvature give the design a dynamic and high-quality look.
The furniture knob is ideal for cabinets, dressers, sideboards, drawers, bathroom furniture and other home furniture. Stylistically, it is particularly well suited to modern, minimalist, purist and design-oriented interior concepts. Thanks to its compact shape, the knob adds a clear accent without visually overloading the furniture front.
The different finishes allow for different style effects. The black version looks striking and modern, the silver-coloured version timeless and elegant. The gold-coloured version adds a warm, high-quality accent and is particularly well suited to more refined or contrasting furniture concepts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€5.80*
Häfele furniture handle H2545 made of metal, CC 128 - 320 mm
Häfele furniture handle H2545 made of metal, CC 128 - 320 mm
The Häfele furniture handle H2545 combines a clear, reduced form with a slightly curved front and smoothly crafted transitions to the side mounting areas. The long, flat handle bar looks modern and high-quality, while the subtle curvature adds a touch of dynamism to the design without losing its straight-lined overall appearance.
The furniture handle is ideal for modern kitchens, chests of drawers, sideboards, cabinets, drawers and other home furniture. It is particularly well suited to minimalist, purist, modern and timelessly elegant interior concepts. On smooth furniture surfaces, the clear lines stand out especially well.
The different finishes allow for various style effects. The dark version looks striking and modern, the light metal version timeless and understated. The gold-coloured version adds a warm, elegant accent and is particularly well suited to high-quality or high-contrast furniture concepts.
Scope of delivery:
1 piece - furniture handle incl. mounting screws
from
€8.50*
Häfele furniture knob H2535 made of metal, 47 x 33 mm
Häfele furniture knob H2535 made of metal, 47 x 33 mm
The Häfele furniture knob H2535 combines a compact shape with gently curved transitions and a distinctive, upward-sweeping grip section. The rounded front looks modern and high-quality, while the flowing lines give the knob a dynamic yet elegant appearance.
The H2535 furniture knob is ideal for cabinets, dressers, sideboards, drawers, bathroom furniture and other home furniture. In terms of style, it is particularly well suited to modern, minimalist, timeless and elegantly designed interior concepts. Thanks to its compact design, the knob creates a clear accent without visually dominating the furniture front.
The different finishes allow for different style effects. The dark version looks striking and modern, the silver-coloured version timeless and understated. The gold-coloured version adds a warm, high-quality accent, while the glossy surface looks particularly refined and prestigious.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€6.60*
Häfele Furniture Handle H2535 made of metal, CC 96 - 160 mm
Häfele Furniture Handle H2535 made of metal, CC 96 - 160 mm
The Häfele furniture handle H2535 combines a clear, straight basic shape with softly formed transitions and gently rounded contours. The wide grip bar appears calm and high-quality, while the upward-leading end sections give the handle a slightly dynamic, elegant silhouette.
The H2535 furniture handle is ideal for modern kitchens, cabinets, dressers, sideboards, drawers and other home furniture. Thanks to the combination of clear lines and soft curves, the handle is particularly well suited to modern, minimalist and timelessly elegant interior concepts. Its reduced form stands out especially well on smooth furniture surfaces.
The different finishes allow for various style effects. The black version looks striking and modern, while the silver-coloured versions appear timeless, elegant and understated. The gold-coloured version adds a warm, high-quality accent and is particularly well suited to more refined or high-contrast furniture concepts.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€8.80*
Häfele furniture knob H2525 made of oak wood, 26.7 x 30 mm
Häfele furniture knob H2525 made of oak wood, 26.7 x 30 mm
The Häfele furniture knob H2525 combines a classic round shape with the natural appeal of wood. The softly tapered silhouette looks harmonious and pleasantly understated, while the visible grain gives the furniture knob a homely and authentic character. This creates a handle that looks simple, high-quality and especially natural at the same time.
The Häfele H2525 furniture knob is ideal for cabinets, dressers, sideboards, drawers, kitchen and living room furniture. Stylistically, it is particularly well suited to Scandinavian, natural, minimalist and modern interior concepts. It also blends harmoniously into homely rustic or timelessly designed interiors thanks to its clear, round shape.
The two variants create different style effects. The light wood surface looks warm, friendly and natural and harmonises especially well with white, beige or light fronts. The dark version looks more distinctive and modern, yet retains its natural character thanks to the visible wood structure.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€8.60*
Häfele furniture knob H2525 made of metal, 26 x 31 mm
Häfele furniture knob H2525 made of metal, 26 x 31 mm
The Häfele furniture knob H2525 impresses with its classic round front and the softly tapered shape of the grip body. The clear circular form looks timeless and harmonious, while the gentle transition to the base gives the knob a modern, high-quality appearance. This combines classic furniture aesthetics with a contemporary design language.
The furniture knob is ideal for cabinets, dressers, sideboards, drawers, kitchen furniture and bathroom furniture. Stylistically, it is particularly well suited to modern, classic, minimalist and timelessly elegant interior concepts. Thanks to its balanced shape, the knob can be used in a versatile way on plain solid-colour fronts as well as on natural wood decors.
The different finishes create different style effects. The black version looks modern and distinctive, while the silver-coloured versions appear more timeless and understated. The gold-coloured version adds a warm, elegant accent, while the antique or textured finish conveys a more rustic, vintage or industrial-inspired character. A glossy finish, on the other hand, looks particularly refined and prestigious.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€5.30*
Häfele furniture handle H2520 made of oak wood, center-to-center 128 - 160 mm
Häfele furniture handle H2520 made of oak wood, center-to-center 128 - 160 mm
The Häfele furniture handle H2520 combines a clear, modern shape with the warm and natural appeal of wood. The wide, straight handle bar with softly rounded ends looks simple and high-quality, while the visible wood grain gives every piece of furniture a homely and natural touch.
In terms of style, the furniture handle is particularly well suited to Scandinavian, modern, natural and minimalist interior concepts. The reduced form ensures that, despite its distinctive material character, the handle remains calm and timeless. This makes it ideal for kitchens, dressers, sideboards, cabinets, drawers and other home furniture.
The different colour variants allow for various style effects. The light wood look appears warm, friendly and natural and harmonises particularly well with white, beige or grey fronts as well as other wood decors. The black version with visible wood structure looks much more modern and contrasting, yet retains its natural character thanks to the recognisable grain.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€15.70*
Häfele furniture handle H2510 made of metal, CC 128 - 160 mm
Häfele furniture handle H2510 made of metal, CC 128 - 160 mm
The Häfele furniture handle H2510 combines a clean, modern shape with a striking, finely textured grip area. The cylindrical center section features precise cross knurling, giving the handle a technical, high-quality and characterful look. The angular side sections create an exciting contrast to the round handle bar and emphasize the modern design.
Stylistically, the furniture handle is particularly well suited to industrial, loft, urban and modern interior concepts. Thanks to the combination of textured surface, straight-lined end pieces and reduced form, the handle looks distinctive without appearing overloaded. On plain kitchen fronts, sideboards, dressers, cabinets or drawers, it sets a targeted design accent.
The different finishes significantly expand the design possibilities. The dark brown version looks warm and high-quality, while the copper-colored version adds a decorative and modern accent. The dark blue version appears unusual and design-oriented, while the gray version has a more technical, understated character.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€13.50*
Häfele Furniture Handle H2510 made of metal, C/C 128 - 320 mm
Häfele Furniture Handle H2510 made of metal, C/C 128 - 320 mm
The Häfele furniture handle H2510 combines a clear, straight-lined basic shape with a strikingly structured grip area. Particularly eye-catching is the fine cross knurling on the cylindrical handle bar, which gives the furniture handle a technical, precise and at the same time high-quality character. The angular fastening elements on the sides create an exciting contrast and emphasize the modern design.
Stylistically, the H2510 furniture handle is particularly well suited to industrial, loft, modern and urban interior concepts. The combination of geometric end pieces and a structured round bar makes the handle look striking yet elegant. On plain kitchen fronts, sideboards, chests of drawers, cabinets or drawers, it becomes a deliberate design element.
The different finishes allow for different style effects. The black version looks particularly powerful and industrial, while the silver-colored version appears more technical, cool and timeless. The gold-colored version combines the striking knurled structure with a warm, elegant look and is ideal for high-quality or high-contrast furniture concepts.
Scope of delivery:
1 piece - furniture handle incl. fastening screws
from
€13.50*
Häfele furniture knob H2515 made of metal, 44 x 39 mm
Häfele furniture knob H2515 made of metal, 44 x 39 mm
The Häfele furniture knob H2515 combines a distinctive cylindrical shape with a finely textured cross-knurled finish. The two knurled side sections meet a smooth central bridge, creating an exciting contrast in material and texture. The design appears technical, precise and high-quality at the same time.
Stylistically, the furniture knob H2515 is particularly well suited to industrial, loft, modern and urban interior concepts. Thanks to the combination of knurled surface and clear geometry, the knob adds a distinctive accent to drawers, chests of drawers, cabinets, sideboards, kitchen or bathroom furniture.
The wide selection of finishes opens up many design possibilities. Dark tones look striking and industrial, while silver-coloured variants appear cooler and more technical. Gold, bronze and copper tones give the furniture knob a warmer and more decorative effect. Unusual colours such as dark blue add an additional modern, individual accent.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€10.70*
Häfele furniture handle H2395 made of metal, CC 128 - 160 mm
Häfele furniture handle H2395 made of metal, CC 128 - 160 mm
The Häfele H2395 furniture handle combines a wide, gently curved grip bar with softly shaped transitions to the side mounting areas. The gentle arch creates a harmonious line, while the more substantial form gives the handle a distinctive and high-quality character.
Stylistically, the furniture handle looks modern and elegant without appearing too strict or technical. The combination of a clear basic shape and soft curves fits particularly well with contemporary, minimalist and homely modern interior concepts. Even on large front panels, the handle adds a calm yet clearly visible design accent.
The H2395 is ideal for kitchens, sideboards, chests of drawers, cabinets, drawers and other home furniture. The black or dark version looks striking and contrasting, while the light metal version achieves a timeless and elegant effect. The more textured dark surface additionally emphasizes a modern, slightly industrial character.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€10.40*
Häfele Furniture Knob H2385 made of metal, 27 x 28 mm
Häfele Furniture Knob H2385 made of metal, 27 x 28 mm
The Häfele furniture knob H2385 impresses with its compact, rectangular shape and softly rounded corners. The flat front surface looks calm, modern and high-quality, while the gentle curves give the knob a harmonious and pleasant appearance. This creates a reduced design that can be used in many different ways.
The H2385 furniture knob is ideal for cabinets, dressers, sideboards, drawers, kitchen and bathroom furniture. Stylistically, it is especially well suited to modern, minimalist, purist and timeless interior concepts. Thanks to its clear shape, the knob blends discreetly into different furniture fronts without appearing arbitrary.
The different finishes allow for different style effects. The dark version looks striking and modern, the silver-coloured version timeless and discreet. The gold-coloured version adds a warm, elegant accent, while the grey or taupe-coloured surface appears especially calm and high-quality.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€4.60*
Häfele Furniture Handle H2390 made of metal, BA 128 mm
Häfele Furniture Handle H2390 made of metal, BA 128 mm
The Häfele furniture handle H2390 is characterized by its particularly flowing and sculptural design. The wide grip bar follows a gentle, asymmetrical movement and blends softly into the side mounting areas. This creates a modern design handle with a noticeably more dynamic effect than classic, strictly straight furniture handles.
In stylistic terms, the furniture handle combines modern elegance with an almost organic design character. The rounded contours and curved front create a soft, high-quality look, while the clear basic shape still makes the handle appear contemporary and understated. It is especially well suited to modern, elegant, and design-oriented interior concepts.
The H2390 is ideal for kitchens, sideboards, dressers, cabinets, drawers, and high-quality living room furniture. On plain, large-area furniture fronts, its unusual silhouette stands out particularly well and adds a deliberate design accent.
The different finishes allow for varying style effects. The silver-colored versions appear modern, elegant, and timeless, while the gold-colored version gives the furniture a warm and especially exclusive touch.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€13.30*
Häfele furniture handle H2380 made of metal, CC 96 - 192 mm
Häfele furniture handle H2380 made of metal, CC 96 - 192 mm
The Häfele furniture handle H2380 impresses with its particularly clear and reduced design language. The wide, flat handle bar with softly rounded corners looks calm, modern and high-quality. Thanks to the simple, recessed mounting bridges, the front view remains deliberately minimalist and straight-lined.
The H2380 furniture handle is ideal for modern kitchens, chests of drawers, sideboards, cabinets, drawers and other home furniture. The model is especially well suited to minimalist, purist, modern and Scandinavian-inspired interior concepts. On smooth furniture fronts, the reduced design looks particularly elegant.
The different finishes create different style effects. The black version looks striking and modern, while the silver-coloured version conveys a timeless and understated character. The gold-coloured version adds a warm, elegant accent, while the grey or taupe finish harmonises particularly well with natural wood decors and calm colour schemes.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€9.30*
Häfele Furniture Handle H2370 made of Metal, CC 96 - 128 mm
Häfele Furniture Handle H2370 made of Metal, CC 96 - 128 mm
The Häfele furniture handle H2370 combines a clear, modern shape with a gently curved line. The slightly inward-curved handle bar appears harmonious and dynamic at the same time, while the softly rounded ends give the design an elegant and pleasantly understated note.
The furniture handle is ideal for kitchens, dressers, sideboards, cabinets, drawers and other home furniture. Thanks to its balanced shape, it is particularly suitable for modern, minimalist, timeless and elegantly furnished living spaces. On smooth furniture fronts, the curved silhouette stands out especially well.
The different finishes allow for various style effects. The black version looks striking and modern, while the silver-colored version appears timeless and discreet. The glossy surface gives the handle a particularly elegant and high-quality character and adds a refined accent to plain fronts.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€7.70*
Häfele furniture knob H2375 made of metal, 37 x 30 mm
Häfele furniture knob H2375 made of metal, 37 x 30 mm
The Häfele furniture knob H2375 impresses with its elongated, slim shape and softly rounded contours. The front grip plate appears clear and reduced, while the cylindrical extension at the rear creates a harmonious and functional form. This results in a modern furniture knob with a subtle, high-quality appearance.
The H2375 furniture knob is ideal for cabinets, dressers, sideboards, drawers, bathroom furniture and other home furniture. Stylistically, it is particularly well suited to modern, minimalist, purist and timeless interior concepts. Its slim silhouette makes the knob unobtrusive and allows it to blend especially well into clean, calm furniture fronts.
The different finishes create different style effects. The dark version looks striking and modern, while the silver-coloured version appears timeless and understated. The glossy surface gives the furniture knob a particularly elegant and high-quality character.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€5.30*
Häfele furniture knob H2365 made of metal, 60 x 27 mm
Häfele furniture knob H2365 made of metal, 60 x 27 mm
The Häfele furniture knob H2365 impresses with its distinctive, two-part shape with two parallel rectangular elements. The clear lines and deliberately open design give the knob a modern, architectural character and make it an exceptional design element on the furniture front.
The H2365 furniture knob is ideal for cabinets, chests of drawers, sideboards, drawers, bathroom furniture and other home furniture. Stylistically, it is particularly well suited to modern, minimalist, purist and industrial-inspired interior concepts. Its clear geometry makes the knob look precise, high-quality and pleasantly understated at the same time.
The different finishes create different style effects. The black version looks particularly striking and modern, the silver-coloured version more timeless and technically elegant. The gold-coloured version combines the straight-lined shape with a warm, high-quality appearance and is particularly well suited to elegant or high-contrast furniture concepts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€6.30*
Häfele Furniture Handle H2360 made of metal, CC 128 - 192 mm
Häfele Furniture Handle H2360 made of metal, CC 128 - 192 mm
The Häfele furniture handle H2360 immediately catches the eye with its distinctive, two-part design. Two parallel, straight elements create an open, technically inspired look and give the handle a modern, architectural character. The clear edges and reduced design language emphasize the high-quality, design-oriented impression.
The furniture handle is particularly well suited for modern kitchens, sideboards, cabinets, dressers, drawers and other straight-lined furniture. On smooth fronts, the double-bar look appears especially striking and supports minimalist, purist, modern and industrial-inspired interior concepts.
The different finishes allow for various style effects. The black version looks bold and high-contrast, while the silver-colored version appears cooler, more technical and timeless. The gold-colored version combines the clear geometry with a warmer, more elegant appearance and is particularly well suited for high-quality or more decorative furniture concepts.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€12.40*
Häfele furniture knob H2355 made of metal, 52 x 31 mm
Häfele furniture knob H2355 made of metal, 52 x 31 mm
The Häfele furniture knob H2355 impresses with its distinctive, open shape and the exceptional design of the front. The rectangular frame with rounded corners is complemented by an elongated cut-out and a curved, internal design element. This creates a furniture knob with a light, almost graphic effect and a high recognition value.
Stylistically, the H2355 furniture knob is particularly well suited to modern, minimalist, elegant and design-oriented interior concepts. The open design looks delicate and high-quality and adds a decorative yet clear accent to drawers, chests of drawers, cabinets, sideboards or bathroom furniture.
The different finishes allow for different style effects. The black version looks striking and modern, the silver-coloured version timeless and technically elegant. The gold-coloured version adds a warm, high-quality accent and is particularly well suited to elegant or high-contrast furniture concepts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€6.80*
Häfele furniture handle H2355 made of metal, CTC 128 - 192 mm
Häfele furniture handle H2355 made of metal, CTC 128 - 192 mm
The Häfele furniture handle H2355 impresses with an exceptionally light yet distinctive design. A defining feature is the elongated rectangular outer frame with an open center, giving the handle a clear, almost graphic appearance. The finely curved inner transitions soften the strict geometry and create an elegant, design-oriented character.
Stylistically, the furniture handle sits between modern, minimalist and Art Deco-inspired design. The combination of straight lines and subtle curves looks high-quality and deliberately crafted. The handle looks especially good on smooth, calm furniture fronts, where its open form acts like an architectural design element.
The H2355 is ideal for kitchens, sideboards, dressers, cabinets, drawers and premium living room furniture. The black version looks bold and modern, while the silver-colored version appears elegant and understated. The gold-colored finish adds a warm, exclusive accent and is especially suitable for premium or more decorative furniture concepts.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€12.80*
Häfele Furniture Handle H2340 made of metal, C/C 128 - 160 mm
Häfele Furniture Handle H2340 made of metal, C/C 128 - 160 mm
The Häfele furniture handle H2340 impresses with a particularly clear, geometric design language. The slim, rectangular handle bar is framed by distinctly shaped, angular handle ends, giving it a precise, architectural character. The reduced design looks modern, technical and high-quality.
The furniture handle is ideal for kitchens, dressers, sideboards, cabinets, drawers and other modern home furniture. It works especially well with minimalist, purist, modern and industrial-inspired interior concepts. On smooth furniture fronts, the straight-lined design stands out particularly clearly.
The different metal finishes emphasize the contemporary character of the handle. The lighter version looks elegant and understated, while the darker variant sets a more striking, technically modern accent. Both finishes can be combined in many ways with wood decors, plain fronts or modern material looks.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€11.90*
Häfele furniture knob H2335 made of metal, 47 x 32 mm
Häfele furniture knob H2335 made of metal, 47 x 32 mm
The Häfele furniture knob H2335 combines a clear, compact basic shape with a distinctive, upward-curved grip section. The straight-lined front appears modern and reduced, while the softly rounded transitions give the design a softer, high-quality touch. This creates a furniture knob with an independent, almost sculptural character.
The H2335 furniture knob is ideal for cabinets, dressers, sideboards, drawers, bathroom furniture and other home furniture. Stylistically, it is particularly well suited to modern, minimalist, purist and design-oriented interior concepts. Thanks to its compact shape, the knob adds a striking accent without appearing too dominant on the furniture front.
The different finishes allow for varying style effects. The black version looks striking and modern, the silver-coloured version timeless and elegant. The gold-coloured version adds a warm, high-quality accent, while the grey or taupe-coloured surface appears particularly calm and modern.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€5.70*
Häfele furniture handle H2335 made of metal, CC 96 - 160 mm
Häfele furniture handle H2335 made of metal, CC 96 - 160 mm
The Häfele furniture handle H2335 combines a straight, modern shape with softly rounded edges and elegantly upward-tapering handle ends. This gives the handle a clear and reduced look without appearing too strict or technical. The flat, slightly bevelled top surface adds a dynamic and high-quality appearance to the design.
The furniture handle is ideal for modern kitchens, dressers, sideboards, cabinets, drawers and other home furniture. Its balanced design is particularly well suited to modern, minimalist, purist and contemporary interior concepts. It also looks elegant and harmonious on large, smooth furniture fronts.
The different finishes allow for a variety of styles. The black version creates a striking, modern accent, while the light metal variant looks timeless and understated. The gold-coloured version gives the furniture a warmer and more exclusive touch. The grey or taupe-coloured surface is particularly suitable for calm, modern colour schemes and natural decors.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€9.30*
Häfele Furniture Knob H2325 made of metal, 24 x 29 mm
Häfele Furniture Knob H2325 made of metal, 24 x 29 mm
The Häfele furniture knob H2325 impresses with its compact, softly rounded shape and a subtly recessed front surface. The oval to rounded-rectangular silhouette looks modern and calm, while the slightly offset edge gives the knob additional depth and a high-quality design character.
The H2325 furniture knob is ideal for cabinets, dressers, sideboards, drawers, bathroom furniture and other home furniture. Stylistically, it is particularly well suited to modern, minimalist, timeless and elegantly furnished living spaces. Its compact shape creates a subtle accent without visually overloading the furniture front.
The different finishes allow for different style effects. The black version looks striking and modern, while the silver-coloured version appears timeless and understated. The gold-coloured version adds a warm, elegant accent. Grey and darker metal tones appear especially calm and high-quality and can be easily combined with natural wood decors or modern plain fronts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€4.60*
Häfele furniture handle H2320 made of metal, CC 96 - 192 mm
Häfele furniture handle H2320 made of metal, CC 96 - 192 mm
The Häfele furniture handle H2320 combines a clear, elongated shape with softly rounded contours and a subtly framed front surface. This gives the handle a modern and elegant look, while still appearing a little more decorative than a purely minimalist bar handle. The slim, recessed mounting bridges support the calm and high-quality overall impression.
The furniture handle is ideal for kitchens, cabinets, dressers, sideboards, drawers and other home furniture. It is especially well suited to modern, elegant and contemporary interior concepts. Thanks to its balanced shape, the handle looks neither too technical nor too playful and can therefore be combined in many ways with different furniture surfaces.
The different finishes create different style effects. The black version looks striking and modern, while the silver finish conveys a timeless and subtle character. The gold version adds a warm, high-quality accent and is especially suitable for elegant furniture concepts. The darker grey and graphite tones, on the other hand, emphasize a modern, urban look.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€8.60*
Häfele shell handle H2315 made of metal, 80 x 25 mm
Häfele shell handle H2315 made of metal, 80 x 25 mm
The Häfele shell handle H2315 combines the classic shape of a shell handle with a modern, design-oriented look. The semicircular basic shape appears compact and clear, while the finely textured surface in the upper area gives the handle additional depth and a high-quality, characterful appearance.
The shell handle H2315 is ideal for dressers, drawers, sideboards, cabinets, kitchen furniture and other home furniture. Stylistically, it is particularly well suited to modern, elegant, industrial-inspired and slightly classic interior concepts. The combination of clear geometry and decorative texture makes the handle eye-catching without appearing playful.
The different finishes allow for different style effects. The silver-coloured version looks timeless, cool and modern, while the gold-coloured version adds a warm, elegant and high-quality accent. The dark version appears particularly distinctive and emphasises the modern, slightly industrial character of the design.
Scope of delivery:
1 piece - shell handle incl. fixing screws
from
€8.10*
Häfele Furniture Knob H2310 made of aluminium, 50 x 30 mm
Häfele Furniture Knob H2310 made of aluminium, 50 x 30 mm
The Häfele furniture knob H2310 impresses with its distinctive, round shape and finely textured surface. Particularly characteristic is the knurled side surface, which gives the knob a technical, precise and high-quality look. The flat front with a fine circular texture underlines the clear, modern design.
In terms of style, the H2310 furniture knob is especially well suited to modern, minimalist, industrial and urban interior concepts. Thanks to its compact, geometric shape, it is ideal for drawers, dressers, cabinets, sideboards, kitchen or bathroom furniture and adds a subtle yet distinctive accent.
The different finishes create different style effects. The black version looks striking and technical, the silver-coloured version rather cool, timeless and modern. The gold-coloured version combines the precise knurled texture with a warm, elegant appearance and is particularly well suited to high-quality or high-contrast furniture concepts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€13.10*
Häfele Furniture Handle H2305 made of metal, CC 96 - 192 mm
Häfele Furniture Handle H2305 made of metal, CC 96 - 192 mm
The Häfele furniture handle H2305 immediately catches the eye with its characteristic, finely knurled grip surface. The cylindrical handle bar is visually accentuated by the textured cross knurling, giving it a technical, precise and high-quality character. The angled handle ends on the sides and the round fastening elements emphasize the striking look.
In terms of style, the furniture handle is particularly well suited to industrial, loft, modern and urban interior concepts. It also adds a striking design accent to kitchen fronts, sideboards, dressers, drawers or cabinet doors. The textured surface appears much more technical and expressive than classic smooth bow handles.
The different finishes create different style effects. The black version looks particularly striking and industrial, the silver-colored version more technical, cool and modern. The gold-colored version combines the distinctive knurled texture with a warmer, more elegant appearance and is especially well suited to high-quality or high-contrast furniture concepts.
Scope of delivery:
1 piece - furniture handle incl. fastening screws
from
€10.90*
Häfele Furniture Handle H2195 made of metal, CC 64 mm
Häfele Furniture Handle H2195 made of metal, CC 64 mm
The Häfele furniture handle H2195 impresses with its particularly flat, straight-lined design and a clear, graphic look. The wide front surface is complemented by a finely crafted, asymmetrical line structure, giving the handle its own distinctive design character despite its reduced form.
The combination of angular basic shape, rounded transitions and a subtle design detail gives the furniture handle a modern and high-quality appearance without being obtrusive. The H2195 is particularly well suited for kitchens, cabinets, chests of drawers, sideboards, drawers and modern living furniture. On smooth fronts, its flat, minimalist form comes into its own especially well.
The different finishes allow for various style effects. The light metal version looks elegant, timeless and technically modern. The dark variants emphasize the striking, purist character and create a strong accent, especially on light fronts, wood decors or concrete looks.
With its wide, flat silhouette and precise line guidance, the Häfele H2195 fits perfectly into modern, minimalist, purist and architecturally inspired interior concepts.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€11.50*
Häfele Furniture Knob H2185 made of metal, 36 x 31 mm
Häfele Furniture Knob H2185 made of metal, 36 x 31 mm
The Häfele furniture knob H2185 is distinguished by its distinctive, compact shape with softly chamfered edges. The almost square front appears clean and modern, while the faceted transitions give the furniture knob a high-quality, slightly sculptural look. This creates a design that feels both straight-lined and elegant.
The H2185 furniture knob is ideal for cabinets, dressers, sideboards, drawers, bathroom furniture and other home furniture. Stylistically, it is particularly well suited to modern, elegant, purist and slightly classically inspired interior concepts. Thanks to its compact shape, the knob adds a clear accent without visually overloading the furniture front.
The different finishes allow for different style effects. The silver-coloured version looks timeless, cool and modern, while the gold-coloured version adds a warm and high-quality accent. The dark version with a bronze-coloured texture has a particularly strong character and is ideal for vintage, industrial or classic-modern furniture concepts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€6.90*
Häfele furniture knob H2165 made of metal, 35 x 29 mm
Häfele furniture knob H2165 made of metal, 35 x 29 mm
The Häfele furniture knob H2165 immediately catches the eye with its unusual, elongated shape and integrated opening. The combination of clear geometry, rounded underside and central cut-out gives the furniture knob a modern, almost sculptural character. This makes the model look much more design-oriented than a classic round knob.
In terms of style, the furniture knob H2165 is particularly well suited to modern, minimalist, purist and architecturally inspired interior concepts. Its compact shape creates a striking yet clean accent on drawers, chests of drawers, cabinets, sideboards or bathroom furniture.
The different finishes allow for various style effects. The black version looks distinctive and modern, while the silver finish appears timeless and technically elegant. The glossy surface emphasizes the high-quality, exclusive character of the design and is particularly well suited to elegant or high-contrast furniture fronts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€4.70*
Häfele furniture knob H2150 made of metal, 56 x 50 mm
Häfele furniture knob H2150 made of metal, 56 x 50 mm
The Häfele furniture knob H2150 impresses with its exceptionally reduced, ring-shaped design. The clear circular shape with a central opening gives the furniture knob a modern, graphic character and makes it a subtle yet distinctive design element.
Stylistically, the H2150 furniture knob is particularly well suited to modern, minimalist, purist, and design-oriented interior concepts. Its compact, geometric form appears calm and high-quality and is ideal for cabinets, drawers, dressers, sideboards, bathroom furniture, or smaller furniture fronts.
The different finishes allow for different style effects. The silver-colored version appears cool, timeless, and modern, while the gold-colored version adds a warmer, elegant accent. Both versions emphasize the knob's clear geometry and can be combined in many ways with light, dark, or natural furniture surfaces.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€10.20*
Häfele furniture knob H2145 made of metal, 62 x 42 mm
Häfele furniture knob H2145 made of metal, 62 x 42 mm
The Häfele furniture knob H2145 is characterised by its distinctive, arched front. The wide, slightly concave shape gives the knob an elegant yet modern appearance. The centrally positioned bridge recedes subtly into the background and allows the curved front to stand out particularly clearly.
Stylistically, the H2145 furniture knob combines modern straight lines with a softer, decorative design language. This makes it especially suitable for modern, timeless and elegantly designed furniture. On chests of drawers, cabinets, drawers, sideboards or bathroom furniture, the knob creates a striking yet harmonious accent.
The different finishes create different style effects. The light metal version appears cool, modern and high-quality, while the darker bronze-coloured variant conveys a warmer and slightly more classic character. This means the H2145 can be combined with both minimalist and more homely furniture concepts.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€7.20*
Häfele Furniture Handle H2125 made of metal, BA 96 - 160 mm
Häfele Furniture Handle H2125 made of metal, BA 96 - 160 mm
The Häfele furniture handle H2125 combines a clear, modern design language with softly rounded contours. The long, slim handle bar looks elegant and understated, while the slightly upward-curved ends give the design a dynamic, high-quality touch. Thanks to the rounded transitions, the handle appears less rigid than purely angular models and blends harmoniously into many modern furniture concepts.
The furniture handle is ideal for kitchens, cabinets, dressers, sideboards, drawers and other home furniture. It works particularly well with modern, minimalist and purist interiors, but thanks to its soft lines it can also be combined in versatile ways with more homely furniture styles.
The different finishes create different style effects. The light metal version looks timeless, elegant and subtle. The dark version adds a striking, modern accent and is especially well suited to light fronts or natural wood decors. The glossy version emphasizes the high-quality, elegant character and creates a refined eye-catcher on simple furniture surfaces.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€5.90*
Häfele furniture knob H2130 made of metal, 34 x 29 mm
Häfele furniture knob H2130 made of metal, 34 x 29 mm
The Häfele furniture knob H2130 impresses with its clear, compact shape and softly rounded front. The elongated, rounded basic form looks modern and calm, while the rearward handle body gives the knob an elegant, slightly dynamic silhouette. This creates a subtle design that can be combined in many ways with different furniture fronts.
The furniture knob H2130 is ideal for cabinets, chests of drawers, drawers, sideboards, bathroom furniture and other home furniture. It is particularly well suited to modern, minimalist, timeless and purist interior concepts. Thanks to its reduced form, the knob looks high-quality without visually taking center stage.
The different finishes create different style effects. The silver-colored version looks timeless and understated, while the black version appears striking and modern. The glossy surface, on the other hand, gives the furniture knob a particularly elegant and refined character.
Scope of delivery:
1 piece - furniture knob incl. fixing screw
from
€2.90*
Häfele furniture handle H2115 made of metal, CC 160 - 320 mm
Häfele furniture handle H2115 made of metal, CC 160 - 320 mm
The Häfele furniture handle H2115 impresses with its particularly slim, straight-lined shape and very restrained design. The long, flat handle bar looks modern and calm, while the subtly rounded edges give the handle a softer, elegant touch. The narrow handle supports blend discreetly into the overall appearance and emphasize the minimalist character.
The furniture handle is ideal for modern kitchens, dressers, sideboards, cabinets, drawers and other home furniture. The design harmonizes especially well with minimalist, purist and contemporary interior concepts. On smooth furniture fronts, it creates a clear, high-quality look that emphasizes the character of the piece of furniture without drawing attention to itself.
The different finishes allow for different style effects. The light metal version looks elegant, timeless and high-quality. The dark version sets a modern, distinctive accent and can be combined particularly well with light fronts, wood decors or contrasting furniture surfaces.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€10.10*
Häfele Furniture Handle H1955 made of metal, C/C 128 - 160 mm
Häfele Furniture Handle H1955 made of metal, C/C 128 - 160 mm
The Häfele furniture handle H1955 combines a clear, straight basic shape with softly rounded handle ends. The wide, flat grip bar looks sturdy and high-quality, while the gently swept-back ends give the design a harmonious yet distinctive appearance. This creates a furniture handle that looks modern, yet still has a slightly classic touch.
The furniture handle is ideal for kitchens, dressers, cabinets, sideboards, drawers and other home furniture. The handle is particularly well suited to modern, classic, rustic or industrial-inspired interior concepts. Thanks to its balanced shape, it can be used on both plain fronts and furniture with a stronger material or decorative character.
The different finishes each reinforce their own style. The light metal version looks timeless, elegant and understated. The darker, antique-looking version, on the other hand, gives the handle a distinctive vintage and industrial character and harmonises particularly well with wooden surfaces, rustic furniture or dark fronts.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€9.92*
Häfele Furniture Handle H1920 made of metal, CC 160 mm
Häfele Furniture Handle H1920 made of metal, CC 160 mm
The Häfele furniture handle H1920 impresses with its particularly clear, reduced design language. The wide, flat grip bar with the ends gently drawn back at the sides gives the handle a modern yet calm appearance. Thanks to its straight-lined design, the H1920 looks especially high-quality and blends harmoniously into contemporary furniture concepts.
The furniture handle is ideal for kitchens, dressers, sideboards, cabinets, drawers and other home furniture. The model is particularly well suited to modern, minimalist, purist and industrial-inspired interiors. The wide front surface creates a clear accent without visually overloading the furniture.
The different finishes each emphasize a different style. The light metal version looks elegant, subtle and timeless. Dark variants create a more distinctive, modern effect and harmonize particularly well with light fronts, wood decors or concrete looks. Versions with a visible surface texture additionally give the handle a technical-industrial character.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€9.36*
Häfele Furniture Handle H1730 made of metal, CC 160 mm
Häfele Furniture Handle H1730 made of metal, CC 160 mm
The Häfele furniture handle H1730 impresses with its particularly soft, harmonious shape. The continuously rounded grip bar and the gently tapering handle ends create a flowing, calm appearance. This makes the handle look modern, understated and pleasantly homely at the same time.
The furniture handle is ideal for kitchens, chests of drawers, sideboards, cabinets, drawers and other home furniture. Its rounded design language fits especially well into modern, minimalist, Scandinavian and timeless interior concepts. Thanks to its reduced design, the handle can be combined in many ways with both smooth fronts and wood decors.
The different finishes allow for various style effects. The light silver-colored version looks classic, elegant and discreet. The black version sets a modern, contrasting accent and is particularly well suited to light furniture surfaces. The warm champagne metal look appears understated and homely and harmonizes excellently with natural tones and modern wood surfaces.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€19.50*
Häfele furniture handle H1525 made of metal, CC 160 - 320 mm
Häfele furniture handle H1525 made of metal, CC 160 - 320 mm
The Häfele furniture handle H1525 is distinguished by its softly rounded shape and the harmoniously upward-curved handle ends. The slim, slightly arched handle bar has a pleasantly understated look and combines a modern appearance with a subtle classic touch. This makes the handle especially versatile and easy to integrate into a wide range of furniture styles.
The H1525 is ideal for kitchens, dressers, cabinets, sideboards, drawers and other home furniture. Its rounded shape appears less technical than sharply angular design handles and therefore suits both modern and more homely, classic or rustic-inspired furniture concepts.
The H1525 is particularly versatile thanks to its different finishes. Light metal tones look elegant and timeless, while warm bronze or copper tones give the furniture a homely and decorative character. Dark finishes emphasize a modern or industrial style. Variants with an antique or textured-looking surface also harmonize excellently with country-style furniture, vintage interiors or furniture with a rustic character.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€20.50*
Häfele furniture handle H1380 made of metal, CC 128 - 192 mm
Häfele furniture handle H1380 made of metal, CC 128 - 192 mm
The Häfele furniture handle H1380 impresses with a particularly clear, angular design language. The straight handle bar, the rectangular cross-sections and the almost right-angled handle ends give the model a modern, architectural look. Decorative curves are deliberately avoided - this makes the handle look reduced, precise and high-quality.
The H1380 is ideal for modern kitchens, cabinets, dressers, sideboards, drawers and other straight-lined furniture. Especially on smooth or handleless-looking fronts, the geometric design creates a clear accent. The handle is perfectly suited to minimalist, purist, modern and industrial-inspired interior concepts.
The different finishes allow for different design effects. The black version creates a strong, modern contrast and harmonizes particularly well with light fronts, wood decors or concrete looks. The silver-colored versions appear timeless and elegant - depending on the finish, from glossy and representative to subtly matte and understated.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€14.00*
Häfele furniture handle H1350 made of metal, CC 128 & 160 mm
Häfele furniture handle H1350 made of metal, CC 128 & 160 mm
The Häfele furniture handle H1350 impresses with a modern, straight-lined shape and a subtle curve. The wide, flat grip bar looks clear and high-quality, while the slightly rounded transitions to the handle ends make the design appear softer. This creates a balanced combination of angular lines and gentle shaping.
The furniture handle is particularly well suited to modern kitchens, dressers, sideboards, cabinets and drawers. On plain furniture fronts, the H1350 adds an elegant accent without appearing too dominant. Its understated design harmonizes with modern as well as minimalist and purist interior concepts.
The different finishes allow for different style effects. The black version looks striking and modern and creates a strong contrast on light furniture surfaces. The silver-colored variants, on the other hand, emphasize the handle's timeless and elegant character. A glossy surface looks particularly refined, while a satin finish appears more subtle and calm.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€11.20*
Häfele Furniture Handle H1345 made of metal, CC 160 & 192 mm
Häfele Furniture Handle H1345 made of metal, CC 160 & 192 mm
The Häfele furniture handle H1345 combines a clear, angular design language with a subtle, even curve. The slim handle bar and the rectangular, straight-edged handle ends give the furniture handle a modern and architectural look. Thanks to the slight arched shape, the design appears less rigid and blends harmoniously into a wide range of furniture concepts.
The H1345 is particularly suitable for modern kitchens, chests of drawers, drawers, sideboards, cabinets and other home furniture. Its reduced design goes perfectly with smooth furniture fronts and emphasizes a modern, minimalist or purist interior style. The handle also adds a fitting accent in industrial-style interiors.
Depending on the desired effect, different finishes are available. The black version looks striking and high-contrast and is particularly effective on light fronts. The silver-colored versions provide a timeless and elegant appearance. While a glossy finish creates a particularly refined accent, a satin finish appears more understated and modern.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€11.40*
Häfele furniture handle H1325 made of metal, CC 160 - 192 mm
Häfele furniture handle H1325 made of metal, CC 160 - 192 mm
The Häfele H1325 furniture handle is distinguished by its elegant, gently curved shape and its clear, modern design. The softly inward-curving handle line gives the furniture handle a dynamic yet harmonious appearance. The softly shaped handle ends are also characteristic, visually rounding off the design and giving the H1325 an independent, high-quality look.
Thanks to the combination of a straight basic shape and a subtle curve, the furniture handle is particularly well suited to modern and contemporary furniture concepts. It is ideal for kitchen cabinets, chests of drawers, sideboards, drawers, living room furniture and cabinet fronts. Even on large, plain fronts, the handle adds an elegant accent without appearing intrusive.
The Häfele H1325 is available in different finishes. The black version looks striking, modern and is particularly well suited to light wood or plain decors. The silver-coloured or satin finish, on the other hand, conveys a subtle, high-quality and timeless look and can be combined in many ways with a wide variety of furniture surfaces.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€10.90*
Häfele Furniture Handle H1315 made of metal, CC 160 - 192 mm
Häfele Furniture Handle H1315 made of metal, CC 160 - 192 mm
The Häfele furniture handle H1315 impresses with its modern, straight-lined shape and a particularly elegant appearance. The elongated, rectangular design with softly rounded ends looks minimalist and high-quality at the same time. The large, open handle recess emphasizes the clear character and creates a harmonious, timeless overall effect.
Thanks to its reduced design language, the H1315 furniture handle is ideal for modern kitchens, cabinets, dressers, sideboards and other furniture pieces in residential and contract settings. The handle harmonizes especially well with smooth, straight-lined furniture fronts and interior styles such as Modern, Minimalist, Industrial or Contemporary.
The different finishes give the handle its own character: a glossy version looks particularly elegant and exclusive, while the matte or satin finish offers a subtle, modern and pleasantly understated appearance. This means the Häfele H1315 can be combined with both light and dark wood decors, solid-color fronts or modern high-gloss surfaces.
Scope of delivery:
1 piece - furniture handle incl. fixing screws
from
€14.70*
Hermat protective set made of matt stainless steel Austrian standard L-shape 88 mm lever/knob
Hermat protective set made of matt stainless steel Austrian standard L-shape 88 mm lever/knob
The protective set from Hermat is the ideal choice for front doors, apartment entrance doors and side entrance doors where security and reliable protection are the priority. The high-quality protective fitting is designed according to Austrian standard for a profile cylinder distance of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective set impresses with its robust and durable design. An integrated drill protection additionally increases security and makes forced manipulation of the door fitting more difficult. This makes the protective set a reliable solution for heavily used entrance and side doors.
Another advantage is fire resistance of up to 90 minutes. This means the protective fitting is also suitable for areas where increased fire protection requirements apply. The combination of durable stainless steel, drill protection and high fire resistance makes the Hermat protective set a functional solution for security-conscious households and buildings.
Scope of delivery:
1 set - protective set (including fixing material, drilling template & installation instructions)
€52.80*
Hermat protective set made of matt stainless steel Austrian standard L-shape 88 mm lever/lever
Hermat protective set made of matt stainless steel Austrian standard L-shape 88 mm lever/lever
The protective set from Hermat is the ideal choice for front doors, apartment entrance doors and side entrance doors where security and reliable protection are the priority. The high-quality protective fitting is designed according to the Austrian standard for a profile cylinder distance of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective set impresses with its robust and durable design. An integrated drill protection provides additional security and makes forced manipulation of the door fitting more difficult. This makes the protective set a reliable solution for heavily used entrance and side doors.
Another advantage is its fire resistance of up to 90 minutes. This means the protective fitting is also suitable for areas where increased fire protection requirements apply. The combination of durable stainless steel, drill protection and high fire resistance makes the Hermat protective set a functional solution for security-conscious households and buildings.
Scope of delivery:
1 set - protective set (including fixing material, drilling template & installation instructions)
€49.20*
Hermat protective fitting made of matt stainless steel Austrian standard L-shape 88 mm lever / lever with core pull protection
Hermat protective fitting made of matt stainless steel Austrian standard L-shape 88 mm lever / lever with core pull protection
The high-quality protective fitting from Hermat offers reliable protection and a durable solution for front doors, apartment entrance doors and side entrance doors. The robust protective escutcheon is designed according to Austrian standard with a PZ dimension of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective fitting impresses with its high resistance and timeless appearance. The integrated drill protection makes forced manipulation of the locking cylinder more difficult and provides additional everyday protection. In addition, the protective fitting has effective core pull protection. The cylinder may protrude a maximum of 3 mm beyond the fitting so that the protective function is optimally ensured.
Another advantage is fire resistance of up to 90 minutes. This makes the protective fitting suitable for applications where increased fire protection is required in addition to burglary protection. Thanks to its stable construction and durable stainless steel material, the Hermat protective fitting is a reliable choice for various entrance and side doors.
Scope of delivery:
1 set - protective fitting (including fixing material, drilling template & installation instructions)
€49.20*
Gedotec Narrow Frame Handle Set VICTORY II made of aluminium lever/knob DIN standard 92 mm PZ
Gedotec Narrow Frame Handle Set VICTORY II made of aluminium lever/knob DIN standard 92 mm PZ
The VICTORY narrow frame handle set from Gedotec is a high-quality door handle set made of aluminium for narrow door profiles and doors with a profile cylinder lock. With its slim backplate, it is particularly suitable for house, side and frame doors where a compact yet robust hardware solution is required. The version with lever handle and non-rotating knob prevents operation from the outside.
The set is designed for a door thickness of 71 to 86 mm and complies with the German standard with a 92 mm distance between the lever handle and the profile cylinder. This makes the VICTORY ideal for doors with a PZ lock. Use on DIN left and DIN right doors ensures flexible installation and makes it easier to choose the right door hardware.
The 247 mm long and 25 or 32 mm wide backplate is particularly compactly designed with a backplate thickness of 10 mm and fits ideally on narrow frame profiles. The door handles have a length of 114 mm and feel comfortable in the hand. The inside handle with return spring supports reliable resetting of the lever handle and ensures comfortable operation in daily use.
For stable and durable fastening, the narrow frame handle set features triple visible screw fixing. The aluminium used combines low weight with a durable surface and makes VICTORY a suitable solution for long-term use on heavily frequented doors.
Scope of delivery:
1 set - narrow frame handle set (including fixing material)
from
€16.04*
Gedotec Narrow Frame Handle Set VICTORY II made of aluminium lever/lever DIN standard 92 mm PZ
Gedotec Narrow Frame Handle Set VICTORY II made of aluminium lever/lever DIN standard 92 mm PZ
The VICTORY narrow frame handle set from Gedotec is a high-quality door handle set made of aluminium for narrow door profiles and doors with a profile cylinder lock. With its slim long backplate, it is particularly suitable for house, side and frame doors where a compact yet robust hardware solution is required. The version with lever handles on both sides enables convenient operation of the door from inside and outside.
The set is designed for a door thickness of 71 to 86 mm and complies with the German standard with a distance of 92 mm between the lever handle and the profile cylinder. This makes the VICTORY ideal for doors with a PZ lock. Use on DIN left and DIN right doors ensures flexible installation and makes it easier to choose the right door hardware.
The 247 mm long and 25 or 32 mm wide backplate is particularly compactly designed with a backplate thickness of 10 mm and fits ideally on narrow frame profiles. The door handles are 114 mm long and feel comfortable in the hand. The inside handle with return spring supports reliable resetting of the lever handle and ensures convenient operation in everyday use.
For stable and durable fastening, the narrow frame handle set has triple visible screw fixing. The aluminium used combines low weight with a durable surface and makes VICTORY a suitable solution for long-term use on heavily frequented doors.
Scope of delivery:
1 set - narrow frame handle set (including fixing material)
from
€12.88*
Hermat protective fitting made of matt stainless steel, Austrian standard L-shape 88 mm lever / knob with cylinder pull protection
Hermat protective fitting made of matt stainless steel, Austrian standard L-shape 88 mm lever / knob with cylinder pull protection
The high-quality protective fitting from Hermat offers reliable protection and a durable solution for front doors, apartment entrance doors and side entrance doors. The robust security fitting is designed according to the Austrian standard with a PZ dimension of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective fitting impresses with its high resistance and timeless appearance. The integrated drill protection makes forced manipulation of the locking cylinder more difficult and provides additional everyday protection. In addition, the security fitting features effective cylinder pull protection. The cylinder may protrude a maximum of 3 mm beyond the fitting so that the protective function is optimally ensured.
Another advantage is fire resistance of up to 90 minutes. This makes the protective fitting suitable for applications where increased fire protection is required in addition to burglary protection. Thanks to its stable construction and durable stainless steel material, the Hermat security fitting is a reliable choice for various entrance and side doors.
Scope of delivery:
1 set - protective fitting (including mounting material, drilling template & installation instructions)
€52.80*
Hermat protective set made of matt stainless steel Austrian standard U-shape 88 mm lever/lever
Hermat protective set made of matt stainless steel Austrian standard U-shape 88 mm lever/lever
The protective set from Hermat is the ideal choice for front doors, apartment entrance doors and side entrance doors where security and reliable protection are the main focus. The high-quality protective fitting is designed according to the Austrian standard for a profile cylinder distance of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective set impresses with its robust and durable design. An integrated drill protection additionally increases security and makes forced manipulation of the door fitting more difficult. This provides reliable protection for heavily used entrance and side doors.
Another advantage is fire resistance of up to 90 minutes. This means the protective fitting is also suitable for areas where increased fire protection requirements apply. The combination of durable stainless steel, drill protection and high fire resistance makes the Hermat protective set a functional solution for security-conscious households and buildings.
Scope of delivery:
1 set - protective set (including mounting material, drilling template & installation instructions)
€49.20*
Hermat protective fitting made of matt stainless steel Austrian standard U-shape 88 mm lever/knob
Hermat protective fitting made of matt stainless steel Austrian standard U-shape 88 mm lever/knob
The protective fitting from Hermat is the ideal choice for front doors, apartment entrance doors and side entrance doors where security and reliable protection are the focus. The high-quality protective escutcheon is designed according to the Austrian standard for a profile cylinder distance of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective fitting impresses with its robust and durable design. An integrated drill protection additionally increases security and makes forced manipulation of the door fitting more difficult. This makes the protective fitting a reliable protection for heavily used entrance and side doors.
Another advantage is fire resistance of up to 90 minutes. This means the protective escutcheon is also suitable for areas where increased fire protection requirements apply. The combination of durable stainless steel, drill protection and high fire resistance makes the Hermat protective fitting a functional solution for security-conscious households and buildings.
Scope of delivery:
1 set - protective fitting (including fixing material, drilling template & installation instructions)
€52.80*
Hermat protective fitting made of matt stainless steel Austrian standard U-shape 88 mm lever / lever with core pull protection
Hermat protective fitting made of matt stainless steel Austrian standard U-shape 88 mm lever / lever with core pull protection
The high-quality protective fitting from Hermat offers reliable protection and a durable solution for front doors, apartment entrance doors and side entrance doors. The robust protective hardware is designed according to Austrian standard with a PZ dimension of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective fitting impresses with its high resistance and timeless appearance. The integrated drill protection makes forced manipulation of the locking cylinder more difficult and provides additional everyday protection. In addition, the protective hardware features effective core pull protection. The cylinder may protrude a maximum of 3 mm beyond the fitting so that the protective function is optimally ensured.
Another advantage is fire resistance of up to 90 minutes. This makes the protective fitting suitable for areas where, in addition to burglary protection, increased fire protection is required. Thanks to its stable construction and durable stainless steel material, the Hermat protective hardware is a reliable choice for various entrance and side doors.
Scope of delivery:
1 set - protective fitting (including mounting material, drilling template & installation instructions)
€49.20*
Gedotec Narrow Frame Handle Set VICTORY made of Aluminium Lever/Knob B36 mm DIN STANDARD 92 mm PZW
Gedotec Narrow Frame Handle Set VICTORY made of Aluminium Lever/Knob B36 mm DIN STANDARD 92 mm PZW
The VICTORY narrow frame handle set from Gedotec is a high-quality door handle set made of aluminium for narrow door profiles and doors with a profile cylinder lock. With its slim long plate, it is particularly suitable for house, side and frame doors where a compact yet robust hardware solution is required. The version with door lever and non-rotating knob prevents operation from the outside.
The set is designed for a door thickness of 71 to 86 mm and complies with the German standard with a 92 mm distance between the lever and the profile cylinder. This makes the VICTORY ideal for doors with a PZ lock. Use on DIN left and DIN right doors ensures flexible installation and makes it easier to choose the right door fitting.
The 247 mm long and 36 mm wide plate is particularly compactly designed with a plate thickness of 10 mm and fits ideally on narrow frame profiles. The door levers are 114 mm long and feel comfortable in the hand. The inside handle with return spring supports reliable resetting of the lever and ensures comfortable operation in daily use.
For stable and durable fastening, the narrow frame handle set features triple concealed screw fixing. After installation, the fastening elements are largely invisible, creating a clean and high-quality appearance. The aluminium used combines low weight with a durable surface and makes the VICTORY a suitable solution for long-term use on heavily frequented doors.
Scope of delivery:
1 set - narrow frame handle set (including fixing material)
from
€29.12*
Hermat protective fitting made of matt stainless steel Austrian standard U-shape 88 mm lever / knob with core pull protection
Hermat protective fitting made of matt stainless steel Austrian standard U-shape 88 mm lever / knob with core pull protection
The high-quality protective fitting from Hermat offers reliable protection and a durable solution for front doors, apartment entrance doors and side entrance doors. The robust security fitting is designed according to the Austrian standard with a PZ dimension of 88 mm and is suitable for door thicknesses from 38 to 56 mm.
Made of stainless steel, the Hermat protective fitting impresses with its high resistance and timeless appearance. The integrated drill protection makes forced manipulation of the locking cylinder more difficult and provides additional everyday protection. In addition, the security fitting features effective core pull protection. The cylinder may protrude a maximum of 3 mm beyond the fitting to ensure optimal protection.
Another advantage is fire resistance of up to 90 minutes. This makes the protective fitting suitable for applications where, in addition to burglary protection, enhanced fire protection is required. Thanks to its stable construction and durable stainless steel material, the Hermat security fitting is a reliable choice for various entrance and side doors.
Scope of delivery:
1 set - protective fitting (including mounting material, drilling template & installation instructions)
€52.80*
Gedotec Narrow Frame Handle Set VICTORY made of aluminium lever/lever B36 mm DIN STANDARD 92 mm PZ
Gedotec Narrow Frame Handle Set VICTORY made of aluminium lever/lever B36 mm DIN STANDARD 92 mm PZ
The VICTORY narrow frame handle set from Gedotec is a high-quality door handle set made of aluminium for narrow door profiles and doors with a profile cylinder lock. With its slim backplate, it is particularly suitable for house doors, side doors and frame doors where a compact yet robust hardware solution is required. The version with lever handles on both sides enables convenient operation of the door from inside and outside.
The set is designed for a door thickness of 71 to 86 mm and complies with the German standard with a 92 mm distance between the lever handle and the profile cylinder. This makes the VICTORY ideal for doors with a PZ lock. Use on DIN left and DIN right doors ensures flexible installation and makes it easier to choose the right door hardware.
The 247 mm long and 36 mm wide backplate is particularly compactly designed with a backplate thickness of 10 mm and fits ideally on narrow frame profiles. The door handles have a length of 114 mm and feel comfortable in the hand. The inside handle with return spring supports reliable resetting of the lever handle and ensures convenient operation in daily use.
For stable and durable fastening, the narrow frame handle set features triple concealed screw fixing. After installation, the fastening elements are largely invisible, creating a clean and high-quality appearance. The aluminium used combines low weight with a durable surface and makes VICTORY a suitable solution for long-term use on heavily frequented doors.
Scope of delivery:
1 set - narrow frame handle set (including fixing material)
from
€25.18*
Häfele Holzleim D2 in der Tube, 15g
Häfele Holzleim D2 in der Tube, 15g
Der Häfele Montageleim ist ein hochwertiger weißer Holzleim auf PVAC-Basis, der sich ideal für Montage- und Korpusverleimungen eignet. Der D2-Leim bietet eine zuverlässige und starke Verbindung von Holz und Holzwerkstoffen und ist damit eine praktische Lösung für zahlreiche Anwendungen im Möbel- und Innenausbau.
Dank seiner feuchtigkeitsbeständigen Eigenschaften eignet sich der Montageleim besonders für Verklebungen, bei denen eine erhöhte Beständigkeit gegenüber gelegentlicher Feuchtigkeit gefragt ist. Der Holzleim wird zunächst weiß aufgetragen und trocknet anschließend transparent aus. Dadurch bleiben die Klebestellen nach dem Trocknen unauffällig und das Ergebnis wirkt sauber und professionell.
Der Holzleim entspricht der DIN EN 204, Beanspruchungsgruppe D2, und bietet eine hohe Klebkraft, die stärker als das Holz selbst sein kann. Der Leim lässt sich gezielt und sparsam auftragen und ist in einer handlichen 15-g-Kunststoff-Tube erhältlich. Damit eignet er sich auch hervorragend für kleinere Reparaturen, Montagearbeiten und präzise Verklebungen im Möbelbau.
Lieferumfang:
1 Stück - Holzleim
from
€0.45*
Häfele Bucket Lid for Waste Collector UTENSIO WB10 PLUS
Häfele Bucket Lid for Waste Collector UTENSIO WB10 PLUS
The matching bucket lid for the Häfele UTENSIO WB10 PLUS waste collector complements the waste system and ensures a closed and tidy interior. The lid is specially designed for the matching buckets of the UTENSIO WB10 PLUS and can be easily placed on top.
As original Häfele accessory, the bucket lid is ideal as a replacement part if the existing lid is damaged or no longer available. This allows the waste collector to continue being used reliably and conveniently.
Scope of delivery:
1 piece - bucket lid
from
€2.20*
Häfele Replacement Bin for Waste Collector UTENSIO WB10 PLUS
Häfele Replacement Bin for Waste Collector UTENSIO WB10 PLUS
The matching replacement bin for the Häfele UTENSIO WB10 PLUS waste collector is the practical solution when an existing waste bin needs to be replaced. The bin is made of robust plastic and comes in the modern anthracite colour. This means it blends harmoniously into the design of the UTENSIO WB10 PLUS waste collector.
The plastic container is specifically intended for use with the Häfele UTENSIO WB10 PLUS and can be easily inserted into the existing waste system. As a suitable spare part, the bin is ideal for maintenance and long-term use of the waste collector in kitchens and furniture construction.
Scope of delivery:
1 piece - replacement bin
from
€8.40*
Häfele Waste Bin Front Pull-Out UTENSIO WB10 PLUS, cabinet width 450 - 600 mm
Häfele Waste Bin Front Pull-Out UTENSIO WB10 PLUS, cabinet width 450 - 600 mm
The UTENSIO WB10 PLUS front pull-out waste bin from Häfele offers a convenient and space-saving solution for waste separation in kitchens and base cabinets. The waste system is mounted behind the furniture front and screwed directly to the side panel of the cabinet. Thanks to the self-adjusting mount, the front pull-out is suitable for side panel thicknesses from 16 to 19 mm.
For particularly convenient operation, the UTENSIO WB10 PLUS features a damped full-extension runner with soft-close self-closing action. This allows the waste bin to be pulled out fully and then closed again gently and reliably after use. The integrated 3D front adjustment enables precise alignment of the furniture front and makes installation easier.
The pull-out element and shelf base are made of robust steel in traffic grey B, RAL 7043, and impress with a modern anthracite look. The matching bins are made of easy-care plastic in anthracite and blend harmoniously into modern kitchen furniture. Thanks to the installation behind the front, the waste system remains discreetly hidden when closed and is quickly accessible when needed.
Scope of delivery:
1 set - pull-out system incl. bins & shelf base (without bin lid)
from
€258.00*
Häfele Wall Cabinet Lift UTENSIO ST10 PLUS EASY DOWN, 8 kg cabinet width 500 - 600 mm clear cabinet height 462 - 464 mm
Häfele Wall Cabinet Lift UTENSIO ST10 PLUS EASY DOWN, 8 kg cabinet width 500 - 600 mm clear cabinet height 462 - 464 mm
The Häfele wall cabinet lift UTENSIO ST10 PLUS EASY DOWN adds extra convenience and improves access to storage space in kitchen wall cabinets. The well-designed lift system makes it easy to lower the contents of a wall cabinet and then store them back inside the cabinet in a space-saving way. The EASY-DOWN function is particularly practical, supporting comfortable operation and making access to dishes, supplies or kitchen utensils easier.
The wall cabinet lift is made of robust steel and finished with a durable anthracite powder coating. This allows the cabinet lift to blend discreetly and modernly into different kitchen designs. The integrated soft-close function ensures gentle and controlled lowering or closing and increases ease of use in everyday operation.
The system is suitable for wall cabinets with a clear cabinet depth from 242 mm. The installation height is 582 mm, while the extension length is 418 mm. With a load capacity of up to 8 kg, the wall cabinet lift offers sufficient capacity for frequently used kitchen utensils and enables clear use of the available storage space.
The scope of delivery includes a complete lift set, three trays with anti-slip mats, a mounting template and the required fixing material. The trays create additional storage surfaces and keep the placed accessories securely in position thanks to the anti-slip mats.
Scope of delivery:
1 piece - lift set
3 pieces - trays with anti-slip mats
1 piece - mounting template
1 set - fixing material
from
€625.00*
Häfele Corner Cabinet Pull-Out UTENSIO ST10 PLUS FOLD CORNER, 30 kg Cabinet width 800 - 1000 mm clear cabinet height 489 - 640 mm
Häfele Corner Cabinet Pull-Out UTENSIO ST10 PLUS FOLD CORNER, 30 kg Cabinet width 800 - 1000 mm clear cabinet height 489 - 640 mm
With the Häfele UTENSIO ST10 PLUS FOLD CORNER corner cabinet pull-out, storage space in corner cabinets is used optimally while remaining comfortably accessible. The high-quality pull-out shelf is ideal for kitchen and base cabinets with hard-to-reach corner areas and ensures that pots, pans, supplies and other kitchen utensils remain clearly arranged and easy to reach. Thanks to its well-thought-out design, the corner cabinet shelf can be used for both left-hand and right-hand installation and can be flexibly adapted to the existing installation situation.
The corner cabinet pull-out consists of a stable frame, shelves and a robust steel guide. The anthracite powder-coated surface gives the corner cabinet pull-out a modern, high-quality appearance and is also designed for long-lasting use. The four shelves in total provide plenty of additional storage space, with each shelf equipped with an anti-slip mat. This keeps the stored items securely in place even when the pull-out is moved.
The integrated soft-close function ensures a high level of operating comfort. The pull-out moves smoothly and is gently and controlledly slowed down when closing. Another particularly practical feature is the tool-free installation and removal of the shelves. This means the shelves can be inserted, removed or taken out for cleaning quickly without requiring any additional tools.
The pull-out is designed for a clear cabinet depth from 489 mm and a clear cabinet height from 640 mm. With a total load capacity of 30 kg, the pull-out shelf is also suitable for storing heavier kitchen utensils. The two front shelves can each carry up to 10 kg, while the two rear shelves each offer a load capacity of up to 20 kg.
Scope of delivery:
1 piece - frame set
2 pieces - front shelves with anti-slip mat
2 pieces - rear shelves with anti-slip mat
1 piece - mounting template
1 set - fixing material
from
€587.80*
Häfele corner cabinet swivel pull-out UTENSIO ST10 PLUS SLIDE CORNER, 30 kg cabinet width 800 - 1200 mm clear cabinet height from 485 mm
Häfele corner cabinet swivel pull-out UTENSIO ST10 PLUS SLIDE CORNER, 30 kg cabinet width 800 - 1200 mm clear cabinet height from 485 mm
The Häfele UTENSIO ST10 PLUS SLIDE CORNER is a high-quality corner cabinet pull-out that makes unused storage space in the corner cabinet optimally accessible. The practical pull-out shelf allows convenient access to supplies, kitchen utensils and other items that are often difficult to reach in the corner area of a cabinet. With its stable construction and a load capacity of up to 30 kg, the corner cabinet pull-out is ideal for clear and space-saving organization.
The anthracite surface is powder-coated and textured. This means the UTENSIO ST10 PLUS SLIDE CORNER blends discreetly into modern cabinet bodies and kitchen fittings. At the same time, the robust design ensures long-lasting use in everyday life.
The corner cabinet pull-out is designed for a clear cabinet depth of at least 485 mm and has an installation height of 150 mm. The shelf offers a load capacity of up to 30 kg and thus creates additional resilient storage space. Thanks to the well-thought-out swivel and pull-out function, even hard-to-reach areas in the corner cabinet can be accessed comfortably.
Tool-free assembly and disassembly of the shelves is particularly convenient. The mounting plate is fixed to the cabinet base, while the swivel arm is screwed to the cabinet side. A supplied mounting template makes precise positioning easier and supports quick, professional installation.
The scope of delivery includes one shelf with mounting plate and swivel arm, a matching mounting template and the required fixing material. This gives you a well-thought-out solution for using the storage space in the corner cabinet efficiently and making the contents conveniently accessible at all times.
Scope of delivery:
1 piece - shelf with mounting plate and swivel arm
1 piece - mounting template
1 set - fixing material
from
€181.20*
Häfele corner cabinet swing-out pull-out UTENSIO ST10 PLUS GLIDE CORNER with 2 shelves, 40 kg cabinet width 800 - 1200 mm clear cabinet height 666 - 805 mm
Häfele corner cabinet swing-out pull-out UTENSIO ST10 PLUS GLIDE CORNER with 2 shelves, 40 kg cabinet width 800 - 1200 mm clear cabinet height 666 - 805 mm
The Häfele UTENSIO ST10 PLUS GLIDE CORNER corner cabinet pull-out creates convenient and clearly arranged storage space in corner cabinets and makes optimal use of the available space. This high-quality pull-out solution allows easy access to the cabinet contents and is ideal for modern kitchen and furniture carcasses. Thanks to the movable shelves, even hard-to-reach areas in the corner cabinet can be used comfortably.
The corner cabinet pull-out consists of two sturdy shelves made of aluminium and wood-based material as well as a robust steel tube axle. The shelves are powder-coated and textured, while the tube axle is chrome-plated and polished. This gives the GLIDE CORNER a high-quality appearance combined with a durable construction for everyday use.
Installation of the corner cabinet pull-out is particularly convenient: the shelves can be mounted and removed without tools, while the tube axle is securely screwed to the bottom and top panels of the carcass. A mounting template included in the delivery additionally facilitates precise installation. Thanks to the 25 mm system spacing, the position of the shelves can be flexibly adjusted to individual requirements.
The swing-out pull-out is suitable for a clear cabinet depth from 485 mm and a clear cabinet height from 666 to 805 mm. Each shelf has a load capacity of 20 kg, allowing the pull-out rack to be loaded with up to 40 kg in total. For particularly smooth and comfortable movement, the corner cabinet pull-out is optionally available with a soft-close function. This must be ordered separately.
Scope of delivery:
1 set - tube axle
2 pieces - shelves
1 piece - mounting template
1 set - fixing material
from
€467.20*
Häfele Corner Cabinet Pull-Out UTENSIO ST10 PLUS INLINE CORNER with 4 shelves, Anthracite 50 kg cabinet width 900 - 1200 mm cabinet height 489 - 548 mm
Häfele Corner Cabinet Pull-Out UTENSIO ST10 PLUS INLINE CORNER with 4 shelves, Anthracite 50 kg cabinet width 900 - 1200 mm cabinet height 489 - 548 mm
With the UTENSIO ST10 PLUS INLINE CORNER corner cabinet pull-out from Häfele, the available storage space in corner cabinets is used optimally. The practical pull-out shelf provides convenient access to supplies, kitchen utensils and other items that are often difficult to reach in deep corner cabinets. Thanks to the well-designed pull-out system, the shelves can be extended far out of the cabinet, so that the entire contents remain clearly visible and easy to reach.
The sturdy frame as well as the shelves and runners are made of high-quality steel. The anthracite powder-coated surface gives the corner cabinet pull-out a modern look and at the same time ensures a robust and durable design. The four shelves are equipped with anti-slip mats so that stored items stay securely in place.
For added convenience, the pull-out is equipped with a soft-close function. This allows the corner cabinet pull-out to close gently and quietly. The shelves can be installed and removed without tools, making setup and later adjustments particularly easy. The stop can be used on both the left and right, allowing the system to adapt flexibly to different installation situations.
The corner cabinet pull-out is suitable for a clear cabinet depth of at least 489 mm and a clear cabinet height of at least 548 mm. The pull-out shelf has a total load capacity of up to 50 kg. The front shelves can each be loaded with up to 15 kg and the rear shelves with up to 10 kg each. This makes the system ideal for the organized storage of heavier kitchen and household items.
Scope of delivery:
1 piece - hanging shelf with anti-slip mats
from
€1,218.00*
Häfele replacement shelf UTENSIO ST10 PLUS SWING PANTRY, cabinet width 600 mm
Häfele replacement shelf UTENSIO ST10 PLUS SWING PANTRY, cabinet width 600 mm
The Häfele UTENSIO ST10 PLUS SWING PANTRY hanging shelf is the practical solution when an existing shelf in the tall cabinet pull-out needs to be replaced or the existing storage system needs to be expanded with additional shelf space. As a matching accessory for the UTENSIO ST10 PLUS SWING PANTRY, the hanging shelf enables flexible and clear use of the available storage space in the tall cabinet.
Thanks to the practical hanging function, the shelf can be easily inserted into the guide system of the tall cabinet pull-out and removed again when needed. This allows the pull-out to be adapted individually to your own needs. Especially for supplies of different heights, kitchen utensils or other cabinet contents, the additional shelf offers a flexible way to organize the available storage space optimally.
The hanging shelf is suitable both as a replacement for a damaged or no longer available shelf and as an addition to the existing UTENSIO ST10 PLUS SWING PANTRY pull-out. This allows the tall cabinet system to be expanded individually and the available storage space to be used even more efficiently.
The robust design is intended for daily use in the tall cabinet and provides reliable storage for supplies and kitchen utensils.
Scope of delivery:
1 piece - hanging shelf with anti-slip mats
from
€62.40*
Häfele Tall Cabinet Internal Pull-Out UTENSIO ST10 PLUS SWING LARDER with 5 - 6 Shelves, 80 kg cabinet width 600 mm clear cabinet height from 1845 mm
Häfele Tall Cabinet Internal Pull-Out UTENSIO ST10 PLUS SWING LARDER with 5 - 6 Shelves, 80 kg cabinet width 600 mm clear cabinet height from 1845 mm
The Häfele UTENSIO ST10 PLUS SWING LARDER is a high-quality internal pull-out for tall cabinets, designed for clear and convenient organization of supplies, kitchen utensils and other items in the tall cabinet. The complete set is designed for a cabinet width of 600 mm and is suitable for tall cabinets with a clear cabinet depth of at least 490 mm and a clear cabinet height from 1,845 mm. Thanks to the partial pull-out, the contents of the cabinet can be reached easily and stored in an organized way.
The well-designed Larder system from Häfele impresses with five height-adjustable hanging shelves that can be mounted and removed without tools. The individual shelves can be positioned flexibly in height in 40 mm increments. This allows the internal pull-out to be optimally adapted to different supplies, kitchen utensils and personal storage requirements. The integrated anti-slip mats ensure that stored items stand securely on the shelves.
With a total load capacity of up to 80 kg, the internal pull-out also offers sufficient stability for storing heavier supplies. When using five shelves, the load capacity per shelf is 15 kg. With six shelves, the maximum load per shelf is 13 kg. The soft-closing pull-out enables comfortable and controlled opening and closing and supports pleasant operation in everyday use.
The tall cabinet internal pull-out is LGA-certified and features a height-adjustable design. The anthracite powder-coated surface gives the system a modern, high-quality appearance and blends harmoniously into contemporary kitchen and furniture designs. The stop can be used on either the left or right, allowing the system to be flexibly adapted to the respective installation situation.
Scope of delivery:
1 set - frame and runners
5 or 6 pieces - hanging shelves with anti-slip mats
1 piece - mounting template
1 set - fixing material
from
€713.60*
Häfele replacement shelf for UTENSIO ST10 PLUS DELUXE PANTRY, cabinet width 600 mm
Häfele replacement shelf for UTENSIO ST10 PLUS DELUXE PANTRY, cabinet width 600 mm
The hanging shelf for the Häfele UTENSIO ST10 PLUS DELUXE PANTRY tall cabinet front pull-out offers a practical way to flexibly expand the existing pantry system or replace an existing shelf. The shelf can be easily hooked into the cabinet frame and allows individual adjustment of the storage layout in the tall cabinet.
As a spare part or addition, the hanging shelf is ideal when extra storage space is needed or an existing shelf needs to be replaced. Thanks to the variable positioning, groceries, kitchen utensils and household items of different heights can be stored neatly and clearly.
The hanging shelf is specifically intended for the Häfele UTENSIO ST10 PLUS DELUXE PANTRY tall cabinet front pull-out and can be installed without any complicated assembly work. Optionally available either as a door shelf or an interior shelf.
Scope of delivery:
1 piece - interior shelf or door shelf (depending on selection)
from
€66.40*
Häfele tall cabinet pull-out UTENSIO ST10 PLUS DELUXE PANTRY with 5 - 6 shelves and door rack, 125 kg cabinet width 600 mm clear cabinet height from 1675 mm
Häfele tall cabinet pull-out UTENSIO ST10 PLUS DELUXE PANTRY with 5 - 6 shelves and door rack, 125 kg cabinet width 600 mm clear cabinet height from 1675 mm
The Häfele UTENSIO ST10 PLUS DELUXE PANTRY is a high-quality tall cabinet front pull-out for clear and space-saving organisation of supplies, kitchen utensils and household items. The complete set combines a sturdy cabinet frame with a door frame, runners and several height-adjustable internal shelves and door shelves. This makes optimal use of the available storage space in the tall cabinet and allows the entire contents to be comfortably accessed from the front.
The tall cabinet front pull-out is suitable for a clear cabinet height from 1,675 mm and a clear cabinet depth from 490 mm. Thanks to the reversible stop, the pull-out can be used for both left-hand and right-hand hinged applications. The soft-close design ensures comfortable opening and closing and underlines the system's high-quality functionality.
Particularly practical is the tool-free assembly and disassembly of the shelves. The individual shelves can be positioned flexibly in height in 64 mm increments. This allows the interior of the tall cabinet to be individually adapted to different-sized storage containers, bottles, kitchen utensils or other items. The integrated anti-slip mats ensure secure storage of the contents.
With a total load capacity of up to 125 kg, the DELUXE PANTRY offers high load-bearing capacity for everyday use. With a configuration of ten shelves, the door shelves can each be loaded with up to 5 kg when using five shelves. For the internal shelves, the load capacity is up to 20 kg each when five shelves are used. This makes the pantry pull-out ideal for structured storage of even heavier supplies and kitchen utensils.
Scope of delivery:
1 set - cabinet frame
1 set - door frame
1 set - runners
5 or 6 pieces - internal shelves with anti-slip mats
5 or 6 pieces - door shelves with anti-slip mats
1 piece - mounting template
1 set - fixing material
from
€1,042.80*
Häfele replacement shelf UTENSIO ST10 PLUS HIGH LARDER, cabinet width 150 - 400 mm
Häfele replacement shelf UTENSIO ST10 PLUS HIGH LARDER, cabinet width 150 - 400 mm
The hanging shelf for the tall cabinet front pull-out UTENSIO ST10 PLUS HIGH LARDER from Häfele is the practical solution when an existing shelf needs to be replaced or the existing tall cabinet pull-out is to be expanded with additional storage space. As a matching accessory for the UTENSIO ST10 PLUS HIGH LARDER system, the hanging shelf can be used flexibly and enables individual organisation of storage space in the tall cabinet.
The shelf is made of robust steel and has an anthracite powder-coated finish. The high-quality surface blends harmoniously into the existing UTENSIO system and is designed for daily use in the kitchen area. With a load capacity of up to 16 kg, the hanging shelf is ideal for storing supplies, kitchen utensils, bottles and other items.
Thanks to the practical Easy-Clip installation, the shelf can be attached to the pull-out frame of the tall cabinet pull-out without tools and just as easily removed again. The height can be flexibly adjusted within the existing 100 mm adjustment grid. This allows the available storage space to be optimally adapted to items of different sizes and heights.
The matching anti-slip mat provides additional support and reduces the slipping of stored items when the front pull-out is moved. The hanging shelf is therefore suitable both as a replacement for a damaged or missing shelf and for expanding the existing tall cabinet pull-out.
Scope of delivery:
1 piece - hanging shelf
from
€31.20*
Häfele tall cabinet pull-out front UTENSIO ST10 PLUS HIGH LARDER with 5 - 6 shelves, 96 kg cabinet width 150 - 400 mm clear cabinet height 1470–2150 mm
Häfele tall cabinet pull-out front UTENSIO ST10 PLUS HIGH LARDER with 5 - 6 shelves, 96 kg cabinet width 150 - 400 mm clear cabinet height 1470 - 2150 mm
The UTENSIO ST10 PLUS HIGH LARDER tall cabinet pull-out front by Häfele creates convenient and clearly arranged storage space in tall kitchen cabinets. As a complete set with hanging shelves, the high-quality pull-out front allows quick and easy access to supplies, kitchen utensils and other items. Thanks to the full-extension design, the entire storage space of the tall cabinet can be used optimally, while the soft-closing guide ensures pleasant and controlled opening and closing.
The pull-out frame, shelves and guide are made of robust steel. The anthracite powder-coated surface gives the tall cabinet pull-out a modern look and makes it a durable solution for everyday use. The UTENSIO ST10 PLUS HIGH LARDER is suitable for a clear cabinet depth from 490 mm and can therefore be integrated into numerous tall cabinet carcasses.
The tool-free Easy-Clip installation of the hanging shelves is particularly convenient. The shelves can be mounted, removed and flexibly adjusted in height without tools. Thanks to the 100 mm adjustment grid, the interior layout can be adapted individually to the stored items. This makes it easy to store bottles, storage containers and kitchen utensils of different heights in a clear and space-saving way.
With a total load capacity of up to 96 kg, the pull-out pantry unit is designed for heavy loads. Each individual shelf can carry up to 16 kg. The integrated anti-slip mats ensure that stored items stand securely and support reliable everyday use of the tall cabinet pull-out front. The LGA certification underlines the tested quality of the system.
Depending on the selected version, the tall cabinet pull-out front is supplied with five or six hanging shelves. The complete set also includes a frame and guide set, a mounting template and the required fixing material.
Scope of delivery:
2 sets - frame and guides
5 or 6 pieces - hanging shelves with anti-slip mats
1 piece - mounting template
1 set - fixing material
from
€427.60*
Häfele soft-close damping for UTENSIO ST10 PLUS GLIDE CORNER
Häfele soft-close damping for UTENSIO ST10 PLUS GLIDE CORNER
The soft-close damping for the Häfele UTENSIO ST10 PLUS GLIDE CORNER ensures a particularly comfortable and gentle closing action for the corner cabinet pull-out. When the pull-out is moved back, the motion is effectively slowed down so that the shelves glide back into their starting position in a controlled and pleasant manner. This noticeably increases the ease of use of the corner cabinet pull-out.
The damper is specially designed for the UTENSIO ST10 PLUS GLIDE CORNER system from Häfele and is ideal for retrofitting. The soft-close damping supports smooth and comfortable retraction of the pull-out and at the same time contributes to high-quality, long-lasting use of the corner cabinet system.
The damping system can be used on the left and right and dampens both arms of the swivel pull-out.
Scope of delivery:
1 pair - soft-close dampers
€109.60*
Häfele Base Cabinet Front Pull-Out UTENSIO ST10 PLUS LARDER, 50 kg Cabinet Width 300 - 400 mm
Häfele Base Cabinet Front Pull-Out UTENSIO ST10 PLUS LARDER, 50 kg Cabinet Width 300 - 400 mm
The Häfele UTENSIO ST10 PLUS LARDER base cabinet front pull-out is a practical solution for organized and space-saving storage in kitchens and base cabinets. This high-quality pantry pull-out provides convenient access to stored food, kitchen utensils, and other supplies. Thanks to the full-extension design, the contents of the shelves can be reached easily and the available storage space in the base cabinet can be used optimally.
The front pull-out is suitable for cabinet depths from 480 mm and is supplied with a stop for the left side. The shelves and runners are made of sturdy steel. The shelves are powder-coated, while the runners have a galvanized surface. This combines the Häfele UTENSIO ST10 PLUS LARDER with a robust construction and a functional, durable design for everyday use. Depending on the version, the shelves are also available with oak or grey glass applications.
For secure storage, both shelves are equipped with an anti-slip mat. Each shelf has a load capacity of 20 kg, providing a high overall load capacity for supplies and kitchen accessories. The runners allow the base cabinet front pull-out to be extended comfortably and provide a clear overview of the storage space.
The front pull-out is LGA-certified and therefore meets high standards of quality and safety. The scope of delivery includes two shelves with anti-slip mats, a pair of runners, a mounting template, and the required fixing material. This provides everything needed for professional installation of the practical pantry pull-out.
Scope of delivery:
2 pieces - shelf with anti-slip mat
1 pair - runners
1 piece - mounting template
1 set - fixing material
from
€168.60*
Häfele base cabinet front pull-out UTENSIO ST10 PLUS SLIM, 45 kg cabinet width 150 - 200 mm
Häfele base cabinet front pull-out UTENSIO ST10 PLUS SLIM, 45 kg cabinet width 150 - 200 mm
The Häfele UTENSIO ST10 PLUS SLIM base cabinet front pull-out is the space-saving solution for making optimal use of narrow base cabinets and organizing additional storage space in a clear and practical way. Thanks to its slim shelves, the front pull-out is especially suitable for cabinet widths of 150 or 200 mm and creates valuable storage space even in small kitchen areas for spices, kitchen utensils, supplies and other small items.
The high-quality pull-out system is made of robust steel. The shelves are powder-coated and therefore durable for everyday use, while the runners have a galvanized surface. The base cabinet front pull-out is suitable for a clear cabinet depth from 479 mm and has a left stop. Depending on the version, the shelves are also available with oak or grey glass applications.
For safe and convenient storage, the two shelves are equipped with anti-slip mats. Each shelf can carry up to 20 kg, while the entire pull-out system has a load capacity of up to 45 kg. This makes the UTENSIO ST10 PLUS SLIM a stable and reliable solution for space-saving internal organization of base cabinets.
The Häfele front pull-out is supplied as a complete set with two shelves, a pair of runners, a mounting template and the matching fixing material. The included mounting template makes professional installation easier and enables precise fitting in the cabinet. The system is LGA-certified and therefore stands for tested quality and reliable product properties.
With the UTENSIO ST10 PLUS SLIM from Häfele, available storage space in the base cabinet can be used particularly efficiently. The slim design, the load-bearing steel shelves and the anti-slip mats make the internal pull-out a practical addition to modern kitchen and furniture concepts.
Scope of delivery:
2 pieces - shelf with anti-slip mat
1 pair - runners
1 piece - mounting template
1 set - fixing material
from
€121.20*
Häfele Base Cabinet Internal Pull-Out UTENSIO ST10 PLUS, 45 kg cabinet width 300 - 900 mm
Häfele Base Cabinet Internal Pull-Out UTENSIO ST10 PLUS, 45 kg cabinet width 300 - 900 mmThe Häfele UTENSIO ST10 PLUS base cabinet internal pull-out creates additional storage space and ensures convenient access to the contents of base cabinets. As a practical single drawer, the internal pull-out can be fully extended, making supplies, kitchen utensils and other items clearly visible and easy to reach. The integrated soft-close function enables gentle and quiet closing and increases ease of use in everyday operation.With a load capacity of up to 45 kg, the UTENSIO ST10 PLUS is also suitable for storing heavier items. The sturdy steel system is designed for durable and reliable use. The trays are powder-coated, while the runners are galvanized. The spacer strip is made of anthracite-colored plastic and, with its modern appearance, blends harmoniously into different kitchen and furniture designs. Depending on the version, the trays are also available with oak or grey glass applications.The tray is equipped with an anti-slip mat. This keeps the stored items securely in place when pulling out and pushing in the pull-out. The internal pull-out is suitable for cabinets with a clear cabinet depth from 480 mm and can therefore be integrated particularly flexibly into existing or newly planned kitchen cabinets.The internal pull-out is supplied as a complete set including runners, spacer strips, mounting template and fixing material. Everything needed for precise installation is included. The base cabinet internal pull-out combines high load capacity, convenient soft-close technology and a well-thought-out storage solution, making it a practical addition to a functional and clearly organized kitchen.Scope of delivery:1 piece - tray with anti-slip mat1 pair - runners4 pieces - spacer strips (2 left, 2 right)1 piece - mounting template1 set - fixing material
from
€106.60*
NEW
Häfele towel holder front pull-out UTENSIO ST10 PLUS TOWEL, anthracite 30 kg cabinet width 150 mm
Häfele towel holder front pull-out UTENSIO ST10 PLUS TOWEL, anthracite 30 kg cabinet width 150 mm
The Häfele UTENSIO ST10 PLUS TOWEL is a practical base cabinet front pull-out with integrated towel holder and creates additional storage space as well as more convenience in the kitchen and household. Thanks to the pull-out design, towels and frequently needed utensils are easy to reach, while the available storage space in the base cabinet is used optimally.
The system features a 2-rail towel holder and a shelf with anti-slip mat. This makes the front pull-out ideal for the clear storage of kitchen utensils and at the same time ensures a secure hold for the stored accessories. The sturdy steel construction is designed for a load capacity of up to 30 kg and is therefore also suitable for heavier items.
The shelves are powder-coated, while the runners have a galvanized surface. This ensures a robust and durable design. The pull-out is suitable for base cabinets with a clear cabinet depth from 479 mm and is designed for left-hand mounting. LGA certification underlines the tested quality of the system.
The scope of delivery includes the 2-rail towel holder, a shelf with anti-slip mat, a pair of runners, a mounting template and the required fixing material. This makes the towel holder pull-out a well thought-out solution for more order, convenience and efficient use of storage space in the base cabinet.
Scope of delivery:
1 piece - 2-rail towel holder
1 piece - shelf with anti-slip mat
1 pair - runners
1 piece - mounting template
1 set - fixing material
€139.60*
Häfele METALLA 50A cup hinge with spring and mounting plate, corner application
Häfele cup hinge METALLA 50A with spring and mounting plate, corner application
The Häfele Metalla 50 A kitchen hinge is a reliable cup hinge for wooden doors with corner application and an opening angle of 110°. It is ideal for kitchen furniture and other furniture constructions where a functional and durable door fastening is required. The hinge is screw-mounted and has a drilling pattern of 45/9.5 mm.
For convenient handling, the Häfele Metalla 50 A is equipped with a self-closing mechanism without damping. This reliably pulls the door into the closed position when closing. The mounting plate included in the scope of delivery can be easily slid on and enables practical installation on the furniture carcass.
The cup hinge with a cup diameter of 35 mm is inserted directly into the corresponding cup drilling of the wooden door. Fastening is carried out with Ø 3 mm chipboard screws, making the hinge suitable for classic screw mounting in furniture construction. With its 110° opening angle, the Metalla 50 A offers a generous range of movement for kitchen cabinet doors and ensures reliable function in everyday use.
Scope of delivery:
1 piece - cup hinge incl. mounting plate
from
€0.70*
Fimet shell handle ESSENZ square with BB perforation for room door locks
Fimet shell handle ESSENZ square with BB perforation for room door locks
The ESSENZ shell handle from Gedotec combines stylish design with functional precision and is the ideal solution for modern wooden sliding doors. With its clear, angular design, it blends harmoniously into contemporary living spaces and emphasises a minimalist ambience. The high-quality external dimensions of 125 x 40 mm with a material thickness of 2 mm ensure an elegant, discreet look that is nevertheless robust and durable.
Thanks to the recess depth of 9 mm, the handle can be precisely integrated into the door, creating a smooth surface that is not only aesthetically pleasing but also guarantees a high level of ease of use. The integrated BB recess enables the combination with room door locks, so that functionality and design merge perfectly.
Manufactured in Italy, the ESSENZ shell handle impresses with its first-class workmanship and the use of high-quality materials. The matching fixing screws (3x16 mm) are included in the scope of delivery, ensuring simple and secure installation.With the Gedotec ESSENZ shell handle, you are opting for a modern hardware element that impresses with its clear lines, durable quality and Italian design - the perfect choice for sophisticated interior design.
Scope of delivery:
1 piece - shell handle incl. fixing screws
from
€8.50*
Häfele strike plate with replacement piece, 212 x 20 mm
Häfele strike plate with replacement piece, 212 x 20 mm
The strike plate with replacement piece from Häfele is a practical solution for professional installation and replacement of locking components on doors. The chrome-plated surface provides an attractive appearance and blends harmoniously into a wide range of door and hardware solutions.
With a length of 212 mm and a width of 20 mm, the strike plate offers compact dimensions for versatile applications. The replacement piece supports straightforward and precise renewal of existing components, making it particularly suitable for repair and renovation work.
Scope of delivery:
1 piece - strike plate
from
€17.16*
Gedotec Wall Door Stop MAGNUS made of brushed matte stainless steel, Ø 21 x 80 mm
Gedotec Wall Door Stop MAGNUS made of brushed matte stainless steel, Ø 21 x 80 mm
The Gedotec wall door stop MAGNUS is a practical and robust door stopper for wall mounting. With its length of 80 mm, the wall door stop reliably prevents doors from hitting the wall directly and causing damage. The integrated rubber buffer with a diameter of 20 mm ensures a gentle stop and reduces annoying impact noise.
The door buffer is simply and securely screwed to the wall. The matching stud screw and wall plug are already included in the scope of delivery, so the required fixing material is available directly for installation. With a diameter of 21 mm, the MAGNUS impresses with its compact, unobtrusive design and is ideal for room doors, interior doors and other doors in residential and commercial areas.
The wall door stop is mounted on the wall in a space-saving way and provides a reliable contact surface for the door. The 4 mm thick thread with a length of 30 mm enables secure fastening. The Gedotec MAGNUS combines easy installation with effective protection for wall and door.
Scope of delivery:
1 piece - door buffer incl. fixing material
€2.40*
Hettich Strike Plate PRESTIGE 2000 Type 8012 made of nickel-plated steel
Hettich Strike Plate PRESTIGE 2000 Type 8012 made of nickel-plated steel
The Hettich PRESTIGE 2000 strike plate is a suitable accessory for various bolt locks in the PRESTIGE 2000 series. It is installed recessed and ensures reliable reception and securing of the lock bolt. The strike plate is suitable for both right-hand and left-hand use, offering a flexible solution for different installation situations.
Made of robust steel and finished with a nickel-plated surface, the Hettich strike plate impresses with a durable and high-quality design.
Scope of delivery:
1 piece - strike plate
€0.99*
Alfer wall hook TYPE 8 made of steel up to 40 kg, 100 x 165 mm
Alfer wall hook TYPE 8 made of steel up to 40 kg, 100 x 165 mm
The Alfer wall hook is the practical solution for space-saving and secure storage of equipment, tools and other items. The sturdy steel equipment holder is galvanized and therefore particularly resistant for use in workshops, garages, basements, sheds or utility rooms. Thanks to its J-shape, a wide variety of equipment can be easily hung up and neatly stored on the wall.
The wall hook is screwed directly to the wall and impresses with a load capacity of up to 40 kg. This also makes it suitable for storing heavier items. The red plastic cap ensures better visibility of the hook and at the same time protects hung equipment from scratches and damage.
Scope of delivery:
1 piece - wall hook
€2.58*
Häfele Shower Door Knob Pair MERCURY Brass chrome-plated polished, for glass thickness 6 - 10 mm
Häfele Shower Door Knob Pair MERCURY Brass chrome-plated polished, for glass thickness 6 - 10 mm
The MERCURY shower door knob pair from Häfele combines functional quality with a timelessly elegant look. The round shape and polished chrome-plated surface create a classic, high-quality accent on the shower enclosure and blend harmoniously into both modern and timeless bathroom designs.
Made from robust brass, the shower knob is specifically designed for shower enclosures with a glass thickness of 6 to 10 mm. The glossy polished chrome surface provides an elegant appearance and makes the shower door knob a suitable addition to chrome shower fittings. The pair of knobs is mounted on both sides of the glass door and allows comfortable opening and closing of the shower door.
For installation, a drilled hole with a diameter of 11 mm is required. This makes the MERCURY shower door knob pair ideal for all-glass shower enclosures and shower solutions with a suitably prepared glass drilling. The combination of solid brass, round design and polished chrome surface makes the shower door knob a functional and visually appealing solution for high-quality bathroom areas.
Scope of delivery:
1 pair - shower door knob
€87.56*
Häfele shell handle ARIANE made of matt nickel-plated brass, Ø 59 mm
Häfele shell handle ARIANE made of matt nickel-plated brass, Ø 59 mm
The ARIANE shell handle from Häfele combines a classic, round shape with an elegant, matt nickel-plated surface. The handle is made of brass, has an outer diameter of 59 mm and is ideal for furniture and doors where a discreet yet stylish handle design is required.
Installation is simple by gluing. Thanks to the integrated glue grooves, the shell handle provides a suitable basis for reliable bonding. Its round design blends harmoniously into different interior styles and gives furniture a high-quality appearance.
The shell handle in brass, matt nickel-plated, is a practical and stylish solution for the individual design of furniture. With its drilling diameter of 54 mm, it is particularly suitable for applications where functionality, uncomplicated installation and timeless design are required.
Scope of delivery:
1 piece - shell handle
€15.51*
Häfele handle hole rosette made of plastic for glass door handles, 5 mm
Häfele handle hole rosette made of plastic for glass door handles, Ø 5 mm
The Häfele plastic insert sleeve is a practical solution for secure and precise handle mounting on glass doors. It serves as a handle hole rosette or insert sleeve and enables clean installation of door handles on glass. Thanks to its natural color, this discreet fastening element is suitable for a wide range of glass and door designs.
The insert sleeve has a length of 5 mm and an inner diameter of 4.4 mm. The outer diameter is 6.8 mm, while the head has a diameter of 9 mm and a head height of 0.8 mm. The plastic element is specially designed for use in handle mounting on glass doors and supports precise, reliable installation.
Whether for new glass doors or as a suitable fastening element when installing door handles: The Häfele insert sleeve impresses with its compact design and dimensions tailored to handle mounting. A suitable choice for furniture and interior construction, glass door systems, and professional installation work.
Scope of delivery:
1 piece - handle hole rosette
from
€0.18*
Häfele edge bolt HEINRICH made of steel, yellow, 80 mm
Häfele edge bolt HEINRICH made of steel, yellow, 80 mm
The HEINRICH edge bolt from Häfele is a practical solution for securely locking furniture doors. The furniture edge bolt is mounted by recessing it into the front edge of the door and is particularly suitable for applications where a space-saving and functional locking solution is required.
The edge bolt features a straight bolt tongue and an angled design. For reliable and durable performance, the furniture bolt is made of robust steel. The yellow zinc-plated surface provides additional protection and gives the edge bolt a resistant finish.
Installation is carried out by recessing it into the front edge of the door and then screwing it in place. The screws are visible. With a bolt height of 62.3 mm, a length of 80 mm and a stroke of 10 mm, HEINRICH offers a compact design for versatile furniture applications.
Scope of delivery:
1 piece - edge bolt
€3.45*
Häfele shower door hinge DT801 made of brass black matt, glass thickness 8 - 12 mm
Häfele shower door hinge DT801 made of brass black matt, glass thickness 8 - 12 mm
The Häfele shower door hinge DT801 is a high-quality solution for the stable and precise mounting of shower doors to the wall. The straight shower door hinge is designed for glass thicknesses from 8 to 12 mm and is suitable for wall-to-glass connections in modern bathrooms. The graphite black, PVD-coated surface gives the hinge an elegant, contemporary look and ensures a durable finish.
The glass door hinge can be opened in both directions and is suitable for both DIN left and DIN right. A practical locking function holds the shower door securely in the open position. From an opening angle of about 85°, the closing function starts, so the door moves in a controlled way toward the closed position. The maximum opening angle is 90°.
The shower hinge made of brass is suitable for shower doors up to a height of 2,400 mm and a width of up to 800 mm. When using two door hinges, the load capacity is up to 45 kg. With a hinge size of 90 x 55 mm and a screw plate of 90 x 50 mm, the DT801 offers a compact and functional design for demanding shower applications.
Installation of the shower door hinge is done by screwing. A corresponding glass cut-out is required for installation. The shower door hinge is specially designed for glass-to-wall connections and is therefore ideal for frameless shower doors and modern shower enclosures.
Scope of delivery:
1 piece - shower door hinge
€63.69*
Häfele mortise lock made of stainless steel for fire and smoke protection doors, 24 mm faceplate DM 65 mm
Häfele mortise lock made of stainless steel for fire and smoke protection doors, 24 mm faceplate DM 65 mm
The Häfele mortise lock for fire and smoke protection doors is a reliable solution for doors where safety, functionality and a high-quality finish are required. The mortise lock is suitable for fire and smoke protection doors as well as for revolving doors and, thanks to the reversible latch, can be used flexibly for DIN left and DIN right.
The faceplate is 24 mm wide, rounded and finished in matt stainless steel. For a durable and robust construction, the faceplate, latch and bolt are made of stainless steel, while the lock case is made of sturdy steel. The supplied strike box is made of plastic and provides a suitable complement to the lock design.
The Häfele mortise lock is supplied as a version with strike plate and strike box and enables professional installation on suitable fire and smoke protection doors. The design is certified according to EN 12209:2003 and thus meets the requirements for mechanical locks for doors. Thanks to the high-quality choice of materials and the flexible DIN conversion, the mortise lock is particularly suitable for professional use in door construction and in security-relevant door systems.
Scope of delivery:
1 piece - mortise lock incl. strike plate & strike boxes
€25.65*
Häfele magnetic catch made of plastic, Ø 14 mm brown 4.5 kg
Häfele magnetic catch made of plastic, Ø 14 mm brown 4.5 kg
The Häfele magnetic catch is a reliable solution for securely closing wooden doors. With a holding force of 4.5 kg, the rigid magnetic catch keeps doors reliably closed and is ideal for furniture and other interior applications. The housing is designed for a 14 mm bore hole and is simply pressed in, allowing for discreet and space-saving installation.
The magnetic catch consists of a robust plastic housing and a steel counterpart. While the housing is intended for press-fitting, the counterpart is securely screwed to the door or furniture корпус. The brown finish blends particularly harmoniously with wooden furniture and various wood surfaces.
Thanks to its simple installation and reliable holding force, the Häfele magnetic catch is a practical choice for wooden doors, furniture doors and cabinet doors. The rigid design ensures a stable connection between the magnetic housing and the counterpart and allows the door to be opened and closed comfortably.
Scope of delivery:
1 piece - magnetic catch incl. counterpart
€0.87*
Hermat stainless steel rosette lifter for removing clip-on rosettes
Hermat stainless steel rosette lifter for removing clip-on rosettes
The rosette lifter from HERMAT is the practical tool for quick and damage-free removal of push-on door rosettes. Thanks to the simple levering motion, clip-on rosettes can be lifted out effortlessly and safely without scratching the door leaf or surface. This makes the rosette lifter ideal for installation, repair, renovation and the replacement of door fittings.
The high-quality rosette lifter made of stainless steel impresses with its robust and durable design. The ergonomically coated plastic handle ensures comfortable and secure handling. In addition, the contact surface to the door is provided with a protective rubber coating. This makes the contact area between the tool and the door particularly gentle and significantly reduces the risk of scratches or damage.
With the HERMAT rosette lifter, all common push-on door rosettes and clip-on rosettes can be removed quickly. The uncomplicated application makes removing the rosettes particularly convenient: place the tool, release it with a simple levering motion and lift off the rosette. This makes removal quick, safe and without unnecessary effort.
Scope of delivery:
1 piece - rosette lifter
€13.50*
Galbusera ALPINE long plate handle set made of wrought iron antique black, Austrian standard 90 mm
Galbusera ALPINE long plate handle set made of wrought iron antique black, Austrian standard 90 mm
The Gedotec ALPINE long plate handle set by Galbusera combines striking vintage design with traditional craftsmanship. Made from high-quality wrought iron in antique black and hand sandblasted, this exceptional door hardware gives any wooden door an authentic, rustic character. The black patina emphasizes the individual look and makes each set a stylish detail for lovers of classic and nostalgic interiors.
The characteristically angular shape of the door handles creates a distinctive accent and harmonizes with doors made from a wide variety of wood types. The ALPINE long plate handle set looks especially impressive on old, dark wooden doors, where it skillfully highlights the original charm of the material. This antique door fitting is ideal for interior doors, room doors and side entrance doors made of wood and fits seamlessly into both rustic and stylish vintage living concepts.
For comfortable operation, the door handles are fixed and rotatable and equipped with a practical return spring. This means the long plate handle set not only enhances the door visually with a high-quality finish, but also impresses in everyday use.
Installation of the door handle set is quick and uncomplicated by screwing. The required fixing material is already included in the scope of delivery, so the door fitting can be mounted immediately. With the Austrian standard 90 mm version, the set is suitable for corresponding doors and is ideal for stylish renovations and upgrading classic wooden doors.
Scope of delivery:
1 set - 2 door plates incl. handle, spindle & fixing material
Premium brand quality - MADE IN ITALY
from
€83.54*
SFS steel frame hinge with round head Ø 16 mm for ÖNORM steel frames
SFS steel frame hinge with round head Ø 16 mm for ÖNORM steel frames
The SFS steel frame round-head hinge in size 16 mm is a high-quality, two-part steel frame hinge for ÖNORM steel frames. The version with a matt nickel-plated surface impresses with its subtle, timeless appearance and is ideal for use on doors with rebated stops.
The two-part standard hinge from SFS features a cylindrical stepped threaded bolt, which enables reliable and precise installation. Thanks to its design specially matched to ÖNORM steel frames, the round-head hinge is a practical solution for professional door installation and use in interior construction.
With its 16 mm round head and matt nickel-plated surface, the SFS steel frame hinge combines functional properties with an unobtrusive, high-quality appearance. It is suitable for craftsmen, door builders and specialist companies that need a matching door hinge for ÖNORM steel frames.
Scope of delivery:
1 piece - steel frame hinge
€6.57*
Häfele angle strike plate made of steel with narrow blind flap, Austrian standard with bulge 210 mm
Häfele angle strike plate made of steel with narrow blind flap, Austrian standard with bulge 210 mm
The Häfele angle strike plate according to ÖNORM B 5350 is a precise solution for rebated doors with wooden frames. With its narrow blind flap, bulged design and round strike opening, it is suitable for professional and visually appealing installation in the door area. ÖNORM B 5350 defines dimensions and applications for strike plates for mechanical and electromechanical door locks.
Made of sturdy steel with a Nirolook surface, the angle strike plate combines a robust design with a subtle stainless-steel appearance. The rounded bend ensures a harmonious shape and supports clean integration into the wooden frame. With a length of 210 mm, a width of 20 mm and a material thickness of 1.50 mm, the strike plate is designed for corresponding ÖNORM door constructions.
The angle strike plate is intended for rebated doors and wooden frames and features a round 6 mm design. The bulged shape of the cut-out enables suitable reception of the latch or lock area. Thanks to its design according to Austrian standards, the strike plate is particularly suitable for door systems where standard-compliant dimensions according to ÖNORM B 5350 are required.
Scope of delivery:
1 piece - strike plate
€5.20*
Häfele EffEff replacement piece 1410 Fafix for installation in matching strike plate
Häfele EffEff replacement piece 1410 Fafix for installation in matching strike plate
The Häfele EffEff replacement piece is a reliable solution for installation in a strike plate for EffEff electric door openers and is ideal for replacing or equipping door systems. The replacement piece is designed without unlocking and can be used for both DIN left and DIN right doors. This makes it flexible for use in different installation situations.
Equipped with a FaFix® latch, the replacement piece offers precise adjustment to the respective installation situation. The latch can be individually adjusted using 4 mm step adjustment, enabling a precise fit and reliable function. The integrated fixing material ensures practical and uncomplicated installation.
Scope of delivery:
1 piece - replacement piece incl. fixing material
€8.20*
Grass wide-angle hinge TIOMOS with damping, 155° for screw fixing
Grass wide-angle hinge TIOMOS with damping, 155° for screw fixing
The TIOMOS cup hinge from Grass is the ideal solution for wooden doors on cabinets with internal or pull-out shelves. As a corner hinge with a straight cranking, it enables zero inset and thus creates valuable space for pull-outs behind the furniture door. The large opening angle of 155° also ensures comfortable access to the cabinet interior.
The furniture hinge impresses with its shallow cup depth of only 10 mm and is suitable for a cup drilling of 35 mm diameter. The drilling pattern is 42/11. Thanks to the option of an all-round mitre stop, the hinge can be used in a versatile way for high-quality furniture constructions.
For precise installation and optimal alignment, the Grass TIOMOS offers extensive adjustment options. Side adjustment is possible by ±2 mm, height adjustment by ±2.5 mm and depth adjustment from -2 to +3 mm. The possible height adjustment may vary depending on the mounting plate used.
The cup is fastened by screwing. The cup is made of robust zinc die-cast, while the hinge arm is made of steel. The nickel-plated surface provides a high-quality appearance and a durable finish. Thanks to the practical clip-on technology, the door can be attached to the cabinet without tools.
Scope of delivery:
1 piece - cup hinge WITHOUT mounting plate
€13.73*
Blum Profile Door Hinge 71B7550D with Blumotion Damping, 125° for Screwing
Blum Profile Door Hinge 71B7550D with Blumotion Damping, 125° for Screwing
The Blum cup hinge 71B7550D is a high-quality CLIP top BLUMOTION hinge for thick wooden doors and profile doors up to 39 mm. With an opening angle of 125° and the practical zero protrusion, the hinge is particularly suitable for cabinets with internal or pull-out shelves. The design enables space-saving installation and prevents pull-outs from being affected by the hinge when the door is opened. Blum lists model 71B7550D as a 125° hinge with corner application, straight hinge arm and screw-on fixing.
The integrated BLUMOTION closing damping ensures a high level of operating comfort. It enables soft and quiet closing of the furniture door and can be deactivated if required. The integrated closing mechanism supports reliable closing of the door. This makes the Blum cup hinge 71B7550D a comfortable damped solution for demanding furniture constructions.
The nickel-plated hinge made of zinc die-cast is designed for durable and reliable use. The three-dimensional adjustment option allows precise alignment of the furniture front. Depending on the mounting plate, side adjustment of ±2 mm, height adjustment of ±3 mm and depth adjustment of -2/+3 mm are possible. The cup drilling depth is 11.70 mm. The hinge cup is mounted by screwing.
Scope of delivery:
1 piece - cup hinge WITHOUT mounting plate
€11.04*
Häfele Glass Shelf Support H9639 made of metal with clamping protection, Ø 5 mm
Häfele Glass Shelf Support Ixconnect SH-G-5040 made of metal with clamping protection, Ø 5 mm
The Ixconnect SH-G-5040 glass shelf support from Häfele is a practical solution for securely fastening glass shelves in furniture, display cabinets, and shelving systems. The shelf support is simply inserted into a 5 mm diameter drilled hole and is suitable for glass shelves with a glass thickness of 6 to 8 mm. The integrated clamping protection ensures that the glass shelf is held reliably and rests securely on the support. Häfele offers various shelf support solutions for glass shelves with different securing and support options.
The nickel-plated surface gives the glass shelf support a subtle, high-quality appearance and matches modern furniture fittings perfectly. With a pin length of 8 mm, the Ixconnect SH-G-5040 can be used for the intended 5 mm drilled hole. The included plastic caps support gentle contact with the glass and help avoid direct contact between the glass and the fitting.
Whether in furniture making, interior finishing, or display cabinet construction: the glass shelf support enables uncomplicated and functional fastening of glass shelves. Thanks to the combination of 5 mm push-in mounting, clamping protection, and plastic caps, the glass shelf support is particularly suitable for constructions where a secure yet visually discreet solution is required.
Scope of delivery:
1 piece - glass shelf support
from
€1.82*
Häfele glass shelf support USE made of metal with plastic insert, Ø 5 mm
Häfele glass shelf support USE made of metal with plastic insert, Ø 5 mm
The USE glass shelf support from Häfele is suitable for the secure and discreet fastening of wooden and glass shelves. The nickel-colored surface gives the shelf support a subtle, high-quality appearance and blends harmoniously into different furniture designs. The transparent plastic insert ensures gentle support for the shelf while also providing a secure hold.
The glass shelf support is easy to install by inserting it into a drilled hole with a diameter of 5 mm. With a pin length of 8 mm, the shelf support can be positioned reliably in the furniture carcass. The support dimension is 1.50 mm and enables precise support for glass and wooden shelves.
Scope of delivery:
1 piece - glass shelf support
from
€0.92*
Häfele rear panel connector WERNER made of white plastic
Häfele rear panel connector WERNER made of white plastic
The WERNER rear panel connector from Häfele enables reliable and uncomplicated fastening of rear panels to furniture carcasses. The practical connector is made of robust plastic and comes in white, allowing it to blend discreetly into different furniture constructions.
Installation is simple by screwing it into the carcass and rear panel. For additional security, the WERNER rear panel connector can be fastened with a chipboard screw with a diameter of 3.5 mm. This makes it ideal for furniture construction and the secure connection of rear panel and carcass.
Scope of delivery:
1 piece - rear panel connector
from
€0.57*
Häfele CARRERA shell handle made of stainless steel 140 x 45 x 13 mm, brass polished PVD coated
Häfele CARRERA shell handle made of stainless steel 140 x 45 x 13 mm, brass polished PVD coated
The CARRERA shell handle from Häfele combines modern design with high-quality workmanship and is a stylish solution for furniture, drawers, flaps and doors. Its characteristic shape with a rectangular outer contour and oval inner area gives the handle a contemporary, elegant look. The brass-plated and polished surface with PVD coating provides a premium appearance and makes the shell handle a decorative detail for demanding furniture design.
Made from stainless steel grade 1.4301/AISI 304, the CARRERA impresses with a robust and durable material. With external dimensions of 140 x 45 mm and housing dimensions of 95 x 30 mm, the shell handle offers a balanced size for a wide range of furniture applications. The housing depth of 10 mm and the 2 mm grip recess complement the compact design.
The Häfele CARRERA shell handle is mounted by gluing, allowing the handle to be attached without visible screws. This supports the clean, purist look and is particularly suitable for modern furniture concepts where a harmonious appearance is the focus.
Scope of delivery:
1 piece - shell handle
€11.11*
Häfele shell handle in boat look made of matte brass 60 x 47.5 mm
Häfele shell handle in boat look made of matte brass 60 x 47.5 mm
The Häfele shell handle in boat look combines maritime design with high-quality workmanship and is a stylish solution for furniture, cabinets, drawers and interior fittings. The characteristic shell handle with integrated folding handle impresses with its functional construction and elegant, timeless appearance.
The rectangular plate forms a harmonious contrast to the round handle and gives the fitting its special look. Made of brass with a matte surface, the handle appears high-quality yet understated. The foldable handle design enables space-saving and comfortable operation and makes the shell handle particularly interesting for applications where functionality and design are equally important.
With its outer dimensions of 47.5 x 60 mm, the Häfele shell handle is suitable for various furniture and interior fitting projects. Whether in a maritime-style interior, on classic furniture pieces or in custom installations - the shell handle made of matte brass adds a stylish accent and ensures comfortable handling.
Scope of delivery:
1 piece - shell handle
€12.14*
Häfele LEA shell handle made of stainless steel Ø 50 mm, polished brass PVD coated
Häfele LEA shell handle made of stainless steel Ø 50 mm, polished brass PVD coated
The LEA shell handle from Häfele combines timeless design with high-quality material quality and is ideal for wooden sliding doors. The round shell handle made of stainless steel 1.4301/AISI 304 impresses with its elegant, polished brass surface and a high-quality PVD coating. This gives the handle its characteristic golden appearance and at the same time makes it a stylish detail on modern furniture and sliding doors.
With an outer diameter of 50 mm and a housing diameter of 40 mm, the LEA shell handle has a compact, harmonious shape. The low projection of only 3 mm ensures a discreet appearance and an almost flush design. Especially on wooden sliding doors, the round handle blends elegantly into the front and enables comfortable opening and closing.
The Häfele shell handle is mounted by gluing and is therefore particularly uncomplicated. The required fastening material is already included in the scope of delivery. The scope of delivery includes two round-head pins with a diameter of 1.6 mm.
Scope of delivery:
1 piece - shell handle
€8.58*
KDS Snap-off Blades EVO Replacement Blades Black 9 mm for Utility Knife
KDS Snap-off Blades EVO Replacement Blades Black 9 mm for Utility Knife
The KDS EVO 9 mm snap-off blades are specially developed high-performance blades for particularly precise and demanding cutting tasks. Thanks to a special heat treatment and the increased carbon content in the steel, the black blades achieve exceptional hardness and long-lasting sharpness. With a Rockwell hardness of 65.9, the KDS EVO snap-off blades offer an excellent combination of stability, edge retention, and precision.
For maximum sharpness, the KDS EVO blades feature a double 2-stage bevel with 13° and 25°. This precisely ground cutting edge enables especially clean and controlled cuts. The black version is characteristic of the higher-carbon steel and underlines the blade's high performance.
With a blade width of 9 mm, the KDS EVO snap-off blades are ideal for narrow KDS utility knives and applications where high cutting precision is required. The pack contains 10 snap-off blades, ensuring suitable replacement blades are always available for professional or demanding use.
Scope of delivery:
10 pieces - snap-off blades
€4.90*
Siso SEE ME glass door hinge made of metal, rectangular, glass / glass, black matt
Version:
Black matt
Siso glass door hinge SEE ME made of metal rectangular glass / glass
The SEE ME glass door hinge from Siso is a practical solution for side mounting of glass doors and is especially suitable for glass-to-glass connections. Its rectangular shape allows the hinge to blend discreetly and functionally into modern glass constructions and provides a reliable connection between glass elements.
SEE ME is designed for glass thicknesses from 4 to 6.75 mm and is therefore suitable for different glass thicknesses in furniture and interior construction. A drill diameter of 10 mm is required for installation. Side mounting enables a space-saving and functional fastening without different hinges for the top and bottom, making the hinge a suitable choice for glass doors and glass partitions.
With the Siso glass door hinge you receive a fitting element specially designed for glass-to-glass connections that combines functionality with a simple design. It is ideal for applications where glass elements are to be connected securely and with a visually restrained appearance.
Scope of delivery:
1 piece - glass door hinge incl. screws
€9.90*
Häfele lip strike plate for unrebated doors, 170 mm straight
Häfele lip strike plate for unrebated doors, 170 mm straight
The Häfele lip strike plate is a suitable solution for unrebated doors with wooden frames. With a lip width of 18 mm and a material thickness of 2 mm, the straight strike plate is suitable for reliable installation on wooden frames. The dimensions of 170 x 24 mm allow versatile use in interior construction and for different door solutions.
The Häfele lip strike plate is specially designed for wooden frames and unrebated doors. The straight lip shape ensures a clean and functional design and supports precise integration into the door construction. Depending on the desired appearance and area of use, the strike plate is available either in matt brushed stainless steel or in nickel-coloured coated steel.
Anyone looking for a high-quality lip strike plate for wooden frames and unrebated doors gets a functional and visually appealing hardware solution with the Häfele model. The different surface variants allow harmonious coordination with existing door and frame fittings.
Scope of delivery:
1 piece - strike plate
from
€4.50*
Grass Mounting Plate TIOMOS for Screwing
Grass Mounting Plate TIOMOS for Screwing
The Grass mounting plate for Tiomos cup hinges is a robust and precise solution for the reliable fastening of furniture hinges. The mounting plate made of sturdy steel with a nickel-plated surface is ideally suited for use with Grass Tiomos cup hinges and enables secure and accurate installation in furniture construction.
Installation is convenient using clip technology, allowing the cup hinge to be connected to the mounting plate quickly and easily. The mounting plate is fastened with chipboard screws or Euro screws. The screw spacing is 32 mm, while the edge distance is 29 mm. The mounting plate is designed for a bore diameter of 3.50 mm.
For precise alignment of the furniture door gap, the Grass mounting plate offers height adjustment of ±2 mm via the integrated threaded worm. This makes it easy to compensate for minor installation deviations and optimally adjust the position of the furniture front.
Scope of delivery:
1 piece - mounting plate
from
€2.10*
Häfele cabinet hanger complete set, load capacity 150 kg
Häfele cabinet hanger complete set, load capacity 150 kg
With the Häfele cabinet hanging set, wall cabinets can be mounted safely and conveniently. The robust steel cabinet hanger impresses with a high load capacity of up to 150 kg and is therefore ideal for the reliable fastening of wall cabinets in furniture and kitchen applications. Installation is straightforward by screwing it in place.
For precise alignment of the wall cabinet, the cabinet hanging set offers practical adjustment options. A side adjustment of 8 mm and a height adjustment of 8 mm make it possible to position the cabinet exactly after installation and conveniently compensate for minor installation deviations. The convenient screw adjustment is particularly practical: by tilting the screwdriver by up to ±15°, the screws can also be reached and adjusted easily in confined spaces.
The scope of delivery includes matching cover caps, available in white or brown. This allows the cover to be visually matched to the furniture. The Häfele cabinet hanging set therefore combines high load capacity, precise adjustment options and convenient installation, making it a reliable solution for fastening wall cabinets.
Scope of delivery:
1 pair - cabinet hangers incl. fixing screws & cover caps
from
€3.60*
Fimet window handle ONDA 1230 made of metal, satin chrome - left
Surface:
Satin chrome
|
Version:
left
Fimet Window Handle ONDA 1230 made of metal
The ONDA 1230 window handle from Fimet combines modern design, high-quality materials and Italian craftsmanship into a stylish detail for discerning living spaces. Designed by Claudio Di Palma, the handle impresses with a clear, contemporary design language and high-quality workmanship that harmoniously combines aesthetics and functionality. As an elegant window fitting, the window handle adds modern accents and visually enhances any window.
Made of brushed metal with a matte surface, the window handle offers a pleasantly subtle feel and an elegant, understated appearance. The matte surface reduces visible fingerprints while emphasizing the handle's premium character. Fine, even light reflections particularly highlight the three-dimensional design and give the ONDA a delicate and exclusive look.
The characteristic design of the window handle follows a minimalist line. The gently curved base flows seamlessly into a flat, rectangular lever, creating a modern, ergonomic silhouette. The lever sits comfortably in the hand and allows convenient operation of the window. The oval rosette complements the design harmoniously and ensures a balanced transition between window and handle.
With the Fimet ONDA 1230, you choose a high-quality window handle MADE IN ITALY that combines functional comfort with Italian design culture. Its reduced form is particularly suitable for modern and purist interior concepts, but can also be combined stylishly with timeless interiors. Whether as a subtle design element or a deliberate design accent: the ONDA 1230 window handle gives every window a high-quality and elegant touch.
Total spindle length: 42 mm - Spindle cross-section: 7 x 7 mm
Scope of delivery:
1 piece - window handle incl. fixing screws
€17.90*
Siso brass sewing machine hinge, 30x72x2 mm
Siso brass sewing machine hinge, 30x72x2 mm
The high-quality sewing machine hinge from Siso is the ideal solution for sewing machine tables, flaps and similar applications where a reliable and smooth-running hinge is required. The flap hinge is made of solid brass and is rustproof. This makes it particularly suitable for durable and high-quality furniture construction.
Thanks to its particularly good sliding properties, the sewing machine table hinge enables easy and convenient opening and closing. The pleasant smooth operation ensures a smooth and quiet movement of the flap. With an opening angle of 180°, the flap can be opened fully and used flexibly.
The impeccable workmanship of the Siso flap hinge ensures high load-bearing capacity and a long service life. The solid brass also gives the hinge a high-quality appearance and makes it a robust choice for furniture and interior construction.
Scope of delivery:
1 piece - flap hinge WITHOUT screws
from
€6.50*
Hebgo folding bracket made of steel without folding spring, 500 kg hot-dip galvanized 380 mm
Hebgo folding bracket made of steel without folding spring, 500 kg hot-dip galvanized 380 mm
The Hebgo folding bracket for benches is a stable and space-saving solution for fold-up benches. The robust construction made of hot-dip galvanized steel is particularly suitable for applications where high load capacity and a durable design are required. With a load capacity of up to 500 kg per pair, the folding bracket provides a reliable basis for stable bench constructions.
The folding bracket for benches is easy to install by screwing it to the wall. With a depth of 380 mm, it is designed for suitable bench tops and enables a compact construction. The maximum distance between two brackets may be 700 mm, allowing the required number of brackets to be planned according to the respective bench.
The Hebgo folding bracket is supplied without a folding spring. This makes it suitable for constructions where the folding and unfolding function is desired without integrated spring support. The hot-dip galvanized steel also provides a resistant surface protection and makes the bracket a durable solution for a wide range of applications.
Whether for workshops, changing rooms, washrooms, public facilities or other areas with space-saving seating solutions: the Hebgo folding bracket for fold-up benches combines high load capacity with a stable, functional construction. Thanks to wall mounting, the bench can be folded up to save space when designed accordingly, making flexible use of the available space possible.
Scope of delivery:
1 piece - folding bracket
€84.90*
Gedotec Pair of BB Rosettes made of matt stainless steel, round for interior doors
Gedotec Pair of BB Rosettes made of matt stainless steel, round for interior doors
The BB rosette pair from Gedotec is the suitable solution for interior doors with a Buntbart lock. The round door rosettes made of stainless steel impress with their timeless look and can be harmoniously integrated into different door designs. This makes them ideal for both modern and classic interior doors.
The glass-fiber-reinforced plastic base ensures stable and reliable mounting of the door rosettes. Thanks to the robust construction, the rosettes are designed for long-lasting use indoors. The rosette pair is supplied including fixing screws, so installation can be carried out quickly and easily.
The rosettes for Buntbart locks combine a high-quality stainless steel surface with a functional design, making them a practical addition to interior doors.
Scope of delivery:
1 pair - rosettes incl. fixing screws
€3.90*
Gedotec VITERA cabinet connector made of metal, yellow zinc-plated
Gedotec VITERA cabinet connector made of metal, yellow zinc-plated
The VITERA cabinet connector from Gedotec is a stable and space-saving solution for the reliable connection of cabinet elements, furniture parts and panels. The solid design ensures a durable connection and is particularly suitable for professional furniture making and interior construction.
The screw-on cabinet connector is easy to install and enables a precise connection of the individual components. Thanks to the connecting screw, the cabinet connector can be easily loosened again if required. This makes VITERA suitable not only for permanent installation, but also for furniture constructions that are intended to remain detachable.
Thanks to its compact and space-saving design, the Gedotec VITERA cabinet connector can be discreetly integrated into furniture constructions. The solid design provides high stability and ensures a secure connection of the cabinet parts.
Scope of delivery:
1 piece - cabinet connector (3-part)
€1.00*
Gedotec Spring Catch MINI LATCH ECO nickel-plated with screws
Gedotec Spring Catch MINI LATCH ECO nickel-plated with screws
The Gedotec MINI LATCH ECO spring catch is a stable and robust latch for versatile applications in furniture construction. It is ideal for securely closing furniture doors, cabinet doors, drawers and other furniture flaps. Thanks to its compact design, the spring catch can be mounted in a space-saving way and ensures reliable hold in everyday use.
The spring catch is adjusted conveniently via the integrated slotted hole. This allows the latch to be optimally aligned during installation and adapted to the respective mounting situation. Installation is simple and secure with screws. The counterpart is made of white plastic and is also screwed in place.
The nickel-plated steel latch impresses with its robust design and is therefore particularly suitable for durable furniture applications. The spring catch offers a practical and affordable solution for furniture makers, carpenters, joiners and DIY enthusiasts who value a reliable and easy-to-install furniture latch.
Scope of delivery:
1 piece - spring catch incl. counterpart & screws
€0.80*
Gedotec Coat Hanger NORA U-shape made of stainless steel 262 mm
Gedotec Coat Hanger NORA U-shape made of stainless steel 262 mm
The NORA coat hanger from Gedotec combines modern design with a stable and durable construction. Made of high-quality stainless steel, the coat hanger is ideal for stylish furnishing of wardrobes, hallways, entrance areas and furniture. With a length of 262 mm, the stainless steel coat hanger offers enough space for hanging jackets, coats, garments and other textiles.
Installation is simple and reliable by screwing directly through the wardrobe or a wooden panel. The matching fastening screws are already included in the scope of delivery, so the NORA coat hanger can be mounted quickly and easily. The robust stainless steel design ensures a durable surface and a high-quality appearance.
With its timeless appearance, the NORA coat hanger can be used in many ways and integrated harmoniously into different interior styles. Whether as a coat hook in the entrance area, as a clothes hanger solution in furniture construction or for furnishing custom-made wardrobes - the Gedotec coat hanger impresses with its functional design and easy fastening.
Scope of delivery:
1 piece - coat hanger incl. fastening screws
€10.60*
Blum drive unit SERVO-DRIVE flex Z10C500A.01
Blum drive unit SERVO-DRIVE flex Z10C500A.01
The Blum drive unit Z10C500A.01 for SERVO-DRIVE flex enables convenient opening of handleless refrigerators, freezers and dishwashers by simply tapping the furniture front. After tapping, the plunger extends and opens the front. The door then remains in the open position for two seconds, allowing the kitchen user to comfortably reach in and fully open the appliance door. This makes the drive unit ideal for modern handleless kitchens with a high level of operating comfort.
The Z10C500A.01 is suitable for all common integrated refrigerators, freezers and dishwashers and can be used with both pull-out and fixed doors. Thanks to its suitability for right-hand and left-hand hinges, the drive unit can be used flexibly in different kitchen situations. For integrated refrigerators and freezers, it is suitable for appliance heights up to 178 cm. Due to the low required niche height of at least 60 mm, the drive unit can also be used where space is limited.
A special feature of the drive unit is the integrated release safeguard. It prevents the plunger from extending when no furniture front is in place. In addition, the integrated anti-lean protection prevents the appliance door from opening unintentionally, for example if someone leans against the furniture front. This ensures reliable and safe operation in everyday kitchen use.
Installation of the Z10C500A.01 is carried out as a practical plug-in version and is particularly easy. A reference run during initial commissioning is no longer required. The opening hold time can be individually set in three different modes. It is also possible to synchronize two drive units or SERVO-DRIVE switches via the integrated buttons. The radio module is already integrated into the drive unit, eliminating the need for an additional communication cable.
For an even larger trigger area, a wireless switch can optionally be used. The drive unit is combined with the standard SERVO-DRIVE components such as power supply unit, cable and node. A QR code directly on the drive unit also provides quick access to the corresponding operating instructions.
Scope of delivery:
1 piece - drive unit incl. mounting accessories
€207.99*
BLUM power supply holder SERVO-DRIVE made of plastic wall mounting, length 211 white grey
BLUM power supply holder SERVO-DRIVE made of plastic wall mounting, length 211 white grey
The Blum power supply holder for Z10NE04EA enables secure and space-saving mounting of the matching Blum power supply on the wall. The holder is specially designed for the Blum power supply Z10NE04EA and is ideal for neat and reliable installation in furniture and installation areas.
The screw-on mounting type ensures a stable connection and easy installation. Thanks to the wall-mount design, the power supply can be positioned securely and stored neatly. With a length of 211 mm, the holder offers a precise solution for the intended power supply.
The power supply holder is made of robust plastic in white grey and blends unobtrusively into different installation situations thanks to its subtle colour. It is a practical addition for professional and space-saving mounting of the Blum power supply.
Scope of delivery:
1 piece - power supply holder
€5.50*
BLUM SERVO-DRIVE power supply incl. power cable 72W black, Z10NE04EA
BLUM SERVO-DRIVE power supply incl. power cable 72W black, Z10NE04EA
The Blum power supply Z10NE04EA is the suitable power supply for the Blum drive unit SERVO DRIVE Z10C500A.01. With an operating voltage of 24 volts and an output of 72 watts, this compact power supply ensures a reliable energy supply for the SERVO DRIVE system and is therefore ideal for modern kitchen and furniture applications with electric opening assistance.
Thanks to its small space requirement, the Blum power supply can be integrated into furniture constructions in a space-saving way. The 2-meter output cable length offers sufficient flexibility for convenient installation. The power supply is designed for a frequency range of 47 to 63 hertz and is therefore suitable for the corresponding mains operation.
The power supply has protection class IP40. This means it is protected against the ingress of solid foreign objects, but not against water. During installation, a suitably protected and dry installation situation should therefore be ensured.
Scope of delivery:
1 piece - power supply incl. 2 m power cable
€124.90*
Lira Universal Overflow A.0998.05 for Stainless Steel Sinks
Lira Universal Overflow A.0998.05 for Stainless Steel Sinks
The Lira overflow set A.0998.05 is a practical spare part for stainless steel sinks and is suitable as a universal overflow for drop, rectangular and oval sinks. The overflow set ensures reliable drainage of excess water and can be used as a replacement for an existing overflow set in suitable sinks.
The set features a Ø 30 mm pipe, which is intended for wall connection or connection with a suitable adapter. Installation is carried out using an M5 screw, making the overflow set easy and secure to fit.
Thanks to its universal design, the overflow is particularly suitable as a spare part for various stainless steel sinks. The overflow set for rectangular and oval sinks is a functional solution when an existing overflow set needs to be replaced or renewed.
Scope of delivery:
1 set - overflow (4-piece)
€14.90*
Siso furniture caster LECCO made of plastic with brake & screw-on plate made of steel, Ø 50 mm with cover
Siso furniture caster LECCO made of plastic with brake & screw-on plate made of steel, Ø 50 mm with cover
The LECCO furniture caster from Siso impresses with its robust
construction, high load capacity and modern, functional design. The
high-quality double furniture caster made of plastic is ideal for a wide
variety of furniture pieces such as mobile pedestals, side tables,
shelves or mobile cabinets and ensures reliable, smooth movement in
everyday use.
With a wheel diameter of 50 mm, the caster offers pleasant rolling
performance on various floor types. Thanks to the stable double-wheel
construction, the weight is distributed optimally, ensuring smooth
running and additional stability. Each caster can support up to 50 kg
and is therefore also suitable for heavier furniture and professional
applications. The integrated steel screw-on plate enables quick and easy
installation
This allows the furniture caster to be securely and permanently
attached to a wide variety of furniture pieces. The durable plastic also
ensures a long service life and easy-care use in living spaces, offices
or contract environments.
Scope of delivery:
1 piece - furniture caster
€1.80*
Grass TIOMOS cup hinge 110° with damping 45/9.5 mm nickel-plated
Grass TIOMOS cup hinge 110° with damping 45/9.5 mm nickel-platedThe TIOMOS cup hinge from Grass is a high-quality solution for modern furniture construction and impresses with reliable function, precise adjustment options and integrated damping. With an opening angle of 110°, this furniture hinge is ideal for kitchen furniture, cabinets and other applications in furniture making.The Grass TIOMOS cup hinge enables optimal gap dimensions for door thicknesses up to 24 mm. Convenient depth adjustment is carried out via a practical threaded screw and allows precise adjustment of the furniture door. In combination with a suitable mounting plate, 3-dimensional adjustment is also possible, allowing the door to be aligned optimally.For particularly high operating comfort, the cup hinge features integrated damping. The damping effect can be adjusted in three stages and enables controlled, gentle closing of the furniture door. This reduces disturbing noises and increases comfort in daily use.The TIOMOS cup hinge from Grass has a nickel-plated surface and therefore impresses with a high-quality appearance. The 45/9.5 drilling pattern enables targeted and precise installation. Thanks to its versatile adjustment options and integrated damping, the Grass TIOMOS is a reliable choice for precise and comfortable furniture fittings.Scope of delivery:1 piece - cup hinge
from
€5.00*
Grass Glass Door Hinge NEXIS MIRRO Click-On 128° nickel-plated
Grass Glass Door Hinge NEXIS MIRRO Click-On 128° nickel-plated
The NEXIS MIRRO glass door hinge from Grass is a practical solution for elegant and secure mounting of glass doors without the need for complex glass drilling. With an opening angle of 128°, the hinge provides a generous door opening range and is particularly suitable for modern furniture and interior construction with glass doors.
Attachment is carried out by bonding a separately available adhesive adapter to the door side. The hinge is then connected to the adapter via an eccentric. This allows quick and uncomplicated final assembly without having to drill the glass panel.
For precise alignment of the glass door, the NEXIS MIRRO can be adjusted in three dimensions in combination with a suitable NEXIS mounting plate. Depending on the version, the glass door hinge is available either with or without self-closing mechanism. In addition, the hinge with self-closing mechanism is suitable for soft-close, whereby the soft-close function is available separately and is not included in the scope of delivery.
The glass door hinge impresses with its simple installation, flexible adjustment and drill-free fastening. It is therefore ideal for high-quality furniture with glass doors where a clean appearance and convenient door function are required.
Scope of delivery:
1 piece - glass door hinge
€13.90*
Fimet shell handle MARINA oval 120x30 mm made of stainless steel black
Fimet shell handle MARINA oval 120x30 mm made of stainless steel black
The high-quality MARINA shell handle from Fimet impresses with its modern design and robust solid stainless steel construction. The completely rust-free shell handle in matte black is ideal for sliding doors, interior doors, drawers and wooden furniture. With its rounded edges and oval shape, the 120 x 30 mm pull handle blends harmoniously into a wide range of interior styles. The 2 mm material thickness ensures a stable and durable design.
The shell handle has two recessed screw holes and can therefore be mounted quickly and easily. Depending on the application, fastening can be done with screws or adhesive. Matching black fixing screws are included in the scope of delivery.
Scope of delivery:
1 piece - shell handle
€6.90*
Gedotec Fenstergriff aus Edelstahl Schwarz matt L-Form, mit Schließzylinder
Gedotec Fenstergriff aus Edelstahl Schwarz matt L-Form, mit Schließzylinder
Der abschließbare Fenstergriff von Gedotec vereint hohe Sicherheit, robuste Qualität und ein zeitloses Design. Gefertigt aus rostfreiem Edelstahl eignet sich der Fenstergriff ideal für Fenster und Balkontüren mit Dreh-/Kipp-Funktion. Die 90°-Einrastfunktion sorgt für eine zuverlässige Bedienung, während die integrierte Absperrfunktion zusätzlichen Schutz bietet.
Der robuste Fenstergriff wurde gemäß DIN EN 1627:2011, Tabelle B1, geprüft und erfüllt die Anforderungen hinsichtlich des Schutzes gegen ein Abdrehen und Abreißen mit einer Belastung von 100 Nm. Dadurch eignet sich der abschließbare Fenstergriff auch für RC2-zertifizierte Sicherheitsfenster. Der Schließzylinder ist gleichschließend ausgeführt, sodass mehrere Fenstergriffe mit demselben Schlüssel gesperrt werden können. Dies macht den Fenstergriff auch zu einer praktischen Kindersicherung.
Dank der beidseitig verwendbaren Ausführung lässt sich der Fenstergriff sowohl links als auch rechts einsetzen. Für eine schnelle und unkomplizierte Montage werden vier verschiedene vorstehende Stiftlängen mitgeliefert: 24 mm, 31 mm, 36 mm und 42 mm. Die passenden Befestigungsschrauben und zwei Schlüssel sind ebenfalls im Lieferumfang enthalten. Das moderne und zeitlose Design fügt sich harmonisch in unterschiedliche Wohn- und Objektbereiche ein.
Lieferumfang:
1 Stück - Fenstergriff inkl. Befestigungsschrauben & 2 Schlüssel
€32.90*
Gedotec Door Damper ECO with Cross Mounting Plate and Push-to-Open
Gedotec Door Damper ECO with Cross Mounting Plate and Push-to-Open
The Gedotec Door Damper ECO is a practical solution for modern kitchen cabinets and furniture with push-to-open function. The high-quality door damper made of grey plastic enables convenient opening of furniture fronts by simply pressing and at the same time ensures controlled, gentle closing. This improves ease of use and protects fronts and cabinet bodies from excessive impact.
Installation of the door damper is straightforward using the integrated cross mounting plate for screw fixing. Ø 4 mm holes are provided for fastening. The compact door stop damper is particularly suitable for use in kitchen cabinets and various other pieces of furniture and can be integrated into the furniture in a space-saving manner. A gap of at least 1.5 mm between front and cabinet body is required for reliable operation.
The door damper was specially developed for push-to-open fronts and can be used with both springless hinges and mechanical hinges with pull-spring function. The combination of efficient push-to-open support and integrated damping creates a comfortable and functional furniture solution. When the front is pressed, it opens reliably, while the damper slows the movement when closing and supports gentler closing.
Scope of delivery:
1 piece - door damper incl. fixing screws
€0.70*
Gedotec Scissor Hinge MAXI for Flaps and Desk Tops, 110 mm
Gedotec Scissor Hinge MAXI for Flaps and Desk Tops, 110 mm
The MAXI scissor hinge from Gedotec is a practical pivot hinge for fold-down table and desk tops. It is ideally suited for fall-fronts and flaps that open downward and, when unfolded, form a flat, stable work or storage surface. This makes the hinge a clever solution for space-saving furniture, folding tables, secretaire desks, and custom-made furnishing solutions.
The scissor hinge for flaps enables a functional and space-saving construction. The flap can be lowered downward, creating a flat surface that can be used, for example, as a desk, work surface, or shelf. Thanks to the pivot function, the hinge supports a comfortable and reliable movement of the fall-front.
The MAXI scissor hinge is made of yellow zinc-plated steel. The robust steel design makes it a durable hardware solution for a wide range of furniture constructions. The yellow zinc plating provides a resistant surface and at the same time gives the hinge a distinctive appearance.
Scope of delivery:
1 piece - scissor hinge
€1.60*
Gedotec Scissor Hinge MIDI for Flaps and Desk Tops, 69 mm
Gedotec Scissor Hinge MIDI for Flaps and Desk Tops
The MIDI scissor hinge from Gedotec is a practical pivot hinge for fold-down table and desk tops. It is ideal for drop-fronts and flaps that open downward and, when unfolded, form a flat, stable work or storage surface. This makes the hinge a clever solution for space-saving furniture, folding tables, secretaire desks and custom-made furnishing solutions.
The scissor hinge for flaps enables a functional and space-saving construction. The flap can be lowered downward, creating a flat surface that can be used, for example, as a desk, work surface or shelf. Thanks to the pivot function, the hinge supports a comfortable and reliable movement of the drop-front.
The Gedotec MIDI scissor hinge is made of yellow zinc-plated steel. The robust steel design makes it a durable hardware solution for a wide range of furniture constructions. The yellow zinc plating provides a resistant surface and at the same time gives the hinge a distinctive appearance.
Scope of delivery:
1 piece - scissor hinge
€1.60*
Gedotec Design furniture caster ALICE black with 42 x 42 mm screw-on plate Ø 60 mm height 92.5 mm load capacity 30 kg, without brake
Version:
without brake
Gedotec Design Furniture Castor ALICE black with 42 x 42 mm screw plate Ø 60 mm height 92.5 mm load capacity 30 kg
The ALICE design furniture castor from Gedotec combines modern design with reliable functionality and is ideal for stylish furniture pieces that need to be flexibly movable. With its compact, contemporary design, the castor blends harmoniously under a wide variety of furniture while ensuring practical, smooth movement.
The furniture castor features a 42 x 42 mm screw plate and has a diameter of 60 mm. With an overall height of 92.5 mm, it is ideally suited for furniture constructions where a compact and visually appealing castor solution is required. The 360° swivel design enables particularly flexible movement and convenient alignment of the furniture.
Depending on the application, the ALICE design furniture castor is available with or without a brake. The version with brake makes it possible to securely fix the furniture piece when needed, while the version without brake offers especially free movement. With a load capacity of up to 30 kg per castor, it is suitable for numerous furniture applications.
Whether for side tables, coffee tables, cabinets, sideboards, shelves or individual furniture projects – this castor is a practical and design-oriented solution for modern furnishing concepts. Anyone looking for high-quality furniture castors with screw plate, 360° swivel function and optional brake will find ALICE to be a versatile castor solution for professional furniture construction and creative DIY projects.
Scope of delivery:
1 piece - furniture castor
€3.30*
Hettich DRILLJIG 20165 drilling jig for hinges, drill bit Ø 35 mm / 2 x Ø 10 mm
Hettich DRILLJIG 20165 drilling jig for hinges, drill bit Ø 35 mm / 2 x Ø 10 mm
The Hettich DRILLJIG 20165 drilling jig enables precise and reliable installation of furniture hinges for one-off pieces, custom-made items, or the retrofitting of furniture doors. With this practical drilling jig, hinge and mounting plate holes can be made accurately, at the correct angle, and without tear-out. This makes the DRILLJIG particularly suitable for cabinetmakers, joiners, furniture makers, and ambitious DIY enthusiasts who value clean and accurate installation.
The drilling jig supports precise positioning of the holes and prevents the drill bit from wandering, even when starting holes. The carbide-tipped drill bits ensure clean and precise drilling results. This allows hinges and mounting plates to be installed securely and accurately without the need for elaborate aids or special machines.
DRILLJIG is suitable for processing various Hettich hinge and mounting plate series. These include Sensys, Novisys, Intermat, Kamat, SlideOn, Selekta Pro 2000 and Selekta Pro 2035. For use, only a standard hand drill or cordless screwdriver is required.
Whether building custom furniture, making special designs, or retrofitting existing furniture doors: with the Hettich DRILLJIG hinge drilling jig, hinge holes can be made quickly, precisely, and repeatedly. The drilling jig is therefore a practical solution for professional and accurate furniture assembly.
Scope of delivery:
1 hinge drilling body
1 mounting plate drilling body
1 hex drive adapter
1 drill bit ø 35 mm mounted
2 drill bits ø 10 mm mounted
€234.90*
CCE Finger Protection System DIGISMART made of aluminium 2000 mm
CCE Finger Protection System DIGISMART made of aluminium 2000 mm
The DIGISMART finger protection profile from CCE is a reliable protection system for swing doors and protects the dangerous shear and pinch point between the door leaf and frame on the hinge side. It therefore makes a significant contribution to increasing safety in areas where doors are used frequently and finger trapping is to be prevented.
In combination with the DIGISAFE finger protection system, DIGISMART provides comprehensive protection against fingers being trapped in the door. The system is suitable for different types of doors and can be used on wooden doors as well as PVC and aluminium doors. This makes the finger protection profile versatile for various indoor applications.
DIGISMART consists of a robust aluminium profile and is available in two models with different dimensions. This allows the finger protection to be selected to suit the respective door situation. The maximum door opening angle is 120°.
With the DIGISMART finger protection profile, safety on swing doors can be specifically increased. Especially in combination with DIGISAFE, a continuous protection concept is created for the hinge side of the door and the opposite closing side.
Scope of delivery:
1 piece - finger protection profile
from
€103.90*
CCE Finger Protection System DIGISAFE made of aluminium 2000 mm
CCE Finger Protection System DIGISAFE made of aluminium 2000 mm
The DIGISAFE finger protection profile from CCE is a reliable protection system for swing doors and was developed to secure the dangerous shear and pinch point between the door leaf and frame on the hinge outer side. It prevents fingers from entering the critical area between the door and frame when opening and closing the door.
DIGISAFE consists of several aluminium profiles connected to each other by hinges. Thanks to this flexible design, the finger protection system adapts to the movement of the door and allows a door opening angle of up to 180°. At the same time, the internal shear and pinch point between the door and frame is reliably covered.
DIGISAFE can be ideally combined with the CCE DIGISMART finger protection profile. While DIGISAFE protects the internal shear and pinch point on the hinge side, DIGISMART complements the finger protection on the opposite side. Together, they create a comprehensive protection system against fingers being trapped on swing doors.
Thanks to its robust aluminium construction, DIGISAFE is suitable for use on a wide variety of swing doors. The profiles connected by hinges provide high flexibility while ensuring reliable finger protection across the entire movement range of the door.
Scope of delivery:
1 piece - finger protection profile
€149.90*
Blum Opening Angle Limiter 70T3553 for CLIP TOP 110° Cup Hinges to 86°
Blum Opening Angle Limiter 70T3553 for CLIP TOP 110° Cup Hinges to 86°
The BLUM CLIP top opening angle limiter is the practical solution for limiting the opening angle of BLUM CLIP top 110° hinges to 86°. Especially for corner cabinets, the opening angle limiter prevents the cabinet door from hitting an adjacent wall when opened, thereby avoiding damage.
With the opening angle limiter, controlled and safe door movement can be achieved. This simple solution is ideal when the standard opening of a 110° hinge is too wide and the cabinet door should be prevented from hitting walls or adjacent furniture.
Scope of delivery:
1 piece - opening angle limiter
€0.65*
Grass clip-on damper for glass door hinge NEXIS MIRRO
Grass clip-on damper for glass door hinge NEXIS MIRRO
The NEXIS MIRRO clip-on damper from Grass is the matching accessory for the NEXIS MIRRO glass door hinge. The damper enables an adjustable soft-close function and ensures gentle and controlled closing of the glass door.
The clip-on damper is suitable for the version of the NEXIS MIRRO glass door hinge with self-closing mechanism. The damping effect can be individually adjusted, allowing optimal adaptation to the respective door.
Thanks to the practical clip-on technology, the NEXIS MIRRO clip-on damper can be mounted quickly and easily on the hinge. Tool-free installation by simply clipping it on makes the damper a convenient addition to the Grass NEXIS MIRRO system.
Scope of delivery:
1 piece - damper
€5.90*
Grass Cross Mounting Plate NEXIS Click-on for Screwing 2 mm
Grass Cross Mounting Plate NEXIS Click-on for Screwing 2 mm
The NEXIS Click-On mounting plate from Grass is a suitable fastening solution for Grass NEXIS hinges and enables quick and uncomplicated installation. It was specially developed for use with the Grass NEXIS MIRRO glass door hinge and ensures a reliable connection between the hinge and the furniture корпус.
The mounting plate is simply screwed to the furniture корпус and then allows the hinge to be attached conveniently using clip technology. This means the hinge can be fitted quickly and without time-consuming installation work. The practical Click-On function supports efficient and convenient installation in furniture manufacturing and furniture construction.
The Grass NEXIS Click-On mounting plate is ideal for use with NEXIS hinges and offers a functional solution for quick, secure and uncomplicated hinge installation.
Scope of delivery:
1 piece - mounting plate
€0.70*
Grass mounting plate NEXIS Click-on for screwing 2 mm
Grass mounting plate NEXIS Click-on for screwing 2 mm
The NEXIS Click-On mounting plate from Grass is a suitable fastening solution for Grass NEXIS hinges and enables quick and uncomplicated installation. It was specially developed for use with the Grass NEXIS MIRRO glass door hinge and ensures a reliable connection between the hinge and the furniture carcass.
The mounting plate is simply screwed to the furniture carcass and then allows the hinge to be attached conveniently using clip technology. This means the hinge can be fitted quickly and without time-consuming installation work. The practical Click-On function supports efficient and convenient installation in furniture production and furniture construction.
The Grass NEXIS Click-On mounting plate is ideal for use with NEXIS hinges and offers a functional solution for quick, secure and uncomplicated hinge installation.
Scope of delivery:
1 piece - mounting plate
€1.50*
Siso Mirror Holder Set MIRROR CLIP for glass thickness 5 - 6 mm
Siso Mirror Holder Set MIRROR CLIP for glass thickness 5 - 6 mmThe MIRROR CLIP mirror holder from Siso enables secure and discreet mounting of mirrors with a glass thickness of 5 to 6 mm. Its simple design keeps the focus on the mirror and makes it ideal for use in bathrooms, hallways, bedrooms, or commercial areas.The complete set includes all required mounting materials, so nothing stands in the way of quick and easy installation. The sturdy design ensures reliable support and durable fastening of the mirror to the wall. The MIRROR CLIP impresses with its ease of use and is the practical solution for a clean, secure, and visually discreet mirror installation.Scope of delivery:2 pieces - mirror clip bottom2 pieces - mirror clip top4 pieces - mounting screw4 pieces - wall plug
€3.50*
Dulimex magnetic catch PRECISION made of stainless steel for wooden doors
Dulimex magnetic catch PRECISION made of stainless steel for wooden doors
The Dulimex magnetic door catch is the practical solution for securely and conveniently closing cabinet doors. As a compact catch, the magnetic closure ensures that doors are reliably kept closed while still being easy to open. Depending on your needs, the catch is available with a holding force of 1.5 kg or 3 kg, making it suitable for a wide range of applications in furniture making and interior construction.
The scope of delivery includes a matching base plate, a bumper and the required fastening material for easy installation. The paintable surface allows for individual adaptation to the furniture design and ensures discreet integration into existing or new cabinet solutions.
The Dulimex magnetic door catch impresses with its ease of use, versatile applications and reliable function as a cabinet door catch.
Scope of delivery:
1 set - door magnet incl. adhesive plates & fastening material
from
€17.02*
Dulimex construction key DX made of plastic for door locks
Dulimex construction key DX made of plastic for door locks
The Dulimex construction key is a practical tool for professional measuring and gauging of door cylinders. It reliably supports the exact determination of the required cylinder dimensions and thus makes it easier to select the right locking cylinder for various door systems.
In addition, the construction key enables easy operation of mortise locks, even when no door handles have yet been installed. This makes it ideal for use during the construction phase, during renovations, or as part of installation work when doors already need to be checked and moved before the final hardware installation takes place.
The Dulimex construction key impresses with its ease of use and is a helpful accessory for tradespeople, installers, and anyone who needs a quick and precise solution for cylinder measurement and lock operation.
Scope of delivery:
1 piece - construction key
€1.75*
Dulimex Disc Padlock DX made of stainless steel Ø 70 mm with 4-digit combination
Dulimex Disc Padlock DX made of stainless steel Ø 70 mm with 4-digit combination
The Dulimex disc padlock DX with a diameter of 70 mm impresses with its robust construction and high protection against tampering. The 4-digit combination is factory-set to 0-0-0-0 and can be individually adjusted after opening and turning a set screw on the back of the lock. This makes the lock the ideal choice for companies, property managers, workshops or private users when the lock needs to be opened by several people.
The body is made of high-quality stainless steel and is particularly resistant to corrosion and weather influences. The 9.5 mm thick shackle made of hardened steel provides reliable protection against break-in attempts and ensures high stability in daily use.
Whether for gates, sheds, garages, storage rooms, containers or other outdoor areas – the stainless steel DX disc padlock is a durable and reliable solution for a wide range of applications.
Scope of delivery:
1 piece - disc padlock
€13.54*
Dulimex steel door closer adjustable closing force 1 - 2 for light door frames
Dulimex steel door closer adjustable closing force 1 - 2 for light door frames
The Dulimex door closer is the ideal solution for light wooden door frames and ensures that doors close reliably and in a controlled manner. It is especially suitable for fly screen doors, light garden gates or similar wooden doors where automatic closing is desired.
Thanks to the adjustable closing force, the door closer can be flexibly adapted to different door sizes and requirements. With the two available closing strengths (closing force 1 and 2), the closing speed can be optimally regulated so that the door closes gently and securely.
The compact door closer is suitable for doors with a maximum weight of up to 40 kg and impresses with its easy use as well as its reliable function in everyday use.
Scope of delivery:
1 set - door closer incl. mounting screws and pin
€9.89*
Dulimex Magnetic Catch POLAIR 5103 for Screw Mounting
Dulimex Magnetic Catch POLAIR 5103 for Screw Mounting
The POLAIR 5103 magnetic catch from Dulimex is a high-quality magnetic closure for screw mounting and ensures reliable, convenient closing of furniture, cabinet and flap doors. Thanks to its robust construction and powerful permanent magnets, this magnetic catch is suitable both for private furniture making and for professional use in interior finishing, shopfitting or caravan applications.
Depending on the version, the magnetic catch is available with a holding force of 4 kg or 8 kg. The 4 kg version has two magnetic holding points and is ideal for light to medium-weight doors. For higher requirements, the version with four magnetic holding points offers a holding force of 8 kg and ensures a particularly secure closure even on heavier fronts or flaps.
The simple screw-on installation enables quick and uncomplicated fitting. The scope of delivery also includes a colour-matched strike plate, so the magnetic catch can be visually integrated harmoniously and is ready for immediate use.
Scope of delivery:
1 piece - magnetic catch incl. strike plate
from
€6.79*
Dulimex Disc Padlock DX made of stainless steel Ø 70 mm with keyed alike cylinder
Dulimex Disc Padlock DX Ø 70 mm with keyed alike cylinder
The Dulimex disc padlock DX with a diameter of 70 mm impresses with its robust construction and high protection against tampering. Thanks to the keyed alike version with locking system 702, all locks in this series can be conveniently opened and closed with the same key. This makes the lock the ideal choice for companies, property managers, workshops or private users who want to secure multiple access points conveniently.
The body is made of high-quality stainless steel and is particularly resistant to corrosion and weather influences. The 9.5 mm thick shackle made of hardened steel provides reliable protection against break-in attempts and ensures high stability in daily use. The integrated 5-pin cylinder guarantees precise locking function and further increases security.
Two matching keys are included in the scope of delivery, so the lock is ready for immediate use. Whether for gates, sheds, garages, storage rooms, containers or other outdoor areas - the Dulimex disc padlock DX made of stainless steel is a durable and reliable solution for a wide range of applications.
Scope of delivery:
1 piece - disc padlock incl. 2 keys
€12.32*
Dulimex Universal Box Lock with Bevelled Latch, for Euro Profile Cylinder
Dulimex Universal Box Lock with Bevelled Latch, for Euro Profile Cylinder
The box lock from Dulimex is the ideal solution for securely locking garden doors and gates made of wood. Thanks to its robust construction and flexible installation options, the lock is suitable for both left-hand and right-hand hung doors. With a backset of 60 mm and a maximum door thickness of 50 mm, the box lock can be used in many ways and is easy to install.
For reliable locking, the Dulimex box lock features a bevelled latch and a night bolt that ensures a secure closure. In addition, the integrated extra bolt provides another locking option and thus increases the security of your garden door or gate.
The scope of delivery includes a door handle set with escutcheon made of black plastic, which is functional and weather-resistant. A matching strike plate is also included, so the lock is ready for use immediately after installation.
Whether as a replacement for an existing lock or for the new construction of a garden door, the Dulimex box lock impresses with its ease of use, durable quality and reliable locking technology.
Scope of delivery:
1 piece - box lock incl. handle set and strike plate
€28.78*
Dulimex Universal Box Lock with Bevelled Latch, Bit Key incl. 2 Keys
Dulimex Universal Box Lock with Bevelled Latch, Bit Key incl. 2 Keys
The box lock from Dulimex is the ideal solution for securely locking garden doors and wooden garden gates. Thanks to its robust construction and flexible installation options, the lock is suitable for both left- and right-hinged doors. With a backset of 60 mm and a maximum door thickness of 50 mm, the box lock can be used in many ways and is easy to install.
For reliable locking performance, the Dulimex box lock features a bevelled latch and a night bolt that ensures a secure closure. In addition, the integrated extra bolt provides another locking option and thus increases the security of your garden door or garden gate.
The scope of delivery includes a door handle set with escutcheon made of black plastic, which is functional and weather-resistant. Also included are a matching strike plate and two bit keys, so the lock is ready for use immediately after installation.
Whether as a replacement for an existing lock or for a new garden door, the Dulimex box lock impresses with its ease of use, durable quality and reliable locking technology.
Scope of delivery:
1 piece - box lock incl. handle set, strike plate and 2 keys
€30.65*
Dulimex Universal mortise lock with lifting latch, for euro profile cylinder
Dulimex Universal mortise lock with lifting latch, for euro profile cylinder
The mortise lock from Dulimex is the ideal solution for securely locking garden doors and gates made of wood. Thanks to its robust construction and flexible installation options, the lock is suitable for both left-hand and right-hand hung doors. With a backset of 60 mm and a maximum door thickness of 50 mm, the mortise lock can be used in many ways and is easy to install.
For reliable locking performance, the Dulimex mortise lock features a lift and deadbolt latch that ensures a secure closure.
The scope of delivery includes a door handle set with escutcheon made of black plastic, which is functional and weather-resistant. A matching strike plate is also included, so the lock is ready for use immediately after installation.
Whether as a replacement for an existing lock or for the construction of a new garden door, the Dulimex mortise lock impresses with its ease of use, durable quality and reliable locking technology.
Scope of delivery:
1 piece - mortise lock incl. handle set and strike plate
€15.70*
Dulimex Universal Box Lock with Lifting Latch, Bit Key incl. 2 Keys
Dulimex Universal Box Lock with Lifting Latch, Bit Key incl. 2 Keys
The box lock from Dulimex is the ideal solution for securely locking wooden garden doors and gates. Thanks to its robust construction and flexible installation options, the lock is suitable for both left- and right-hinged doors. With a backset of 60 mm and a maximum door thickness of 50 mm, the box lock can be used in many ways and is easy to install.
For reliable locking performance, the Dulimex box lock features a lifting latch and night latch that ensure a stable closure. In addition, the integrated extra bolt provides another locking option and thus increases the security of your garden door or gate.
The scope of delivery includes a handle set with escutcheon made of black plastic, which is functional and weather-resistant. Also included are a matching strike plate and two bit keys, so the lock is ready for use immediately after installation.
Whether as a replacement for an existing lock or for the construction of a new garden door, the Dulimex box lock impresses with its ease of use, durable quality and reliable locking technology.
Scope of delivery:
1 piece - box lock incl. handle set, strike plate and 2 keys
€16.32*
BMB Folding Table Frame FOLDIX T-ECON made of steel
BMB Folding Table Frame FOLDIX T-ECON made of steel
The FOLDIX T-ECON folding table frame from BMB combines thoughtful functionality with modern design and is the ideal solution for flexible room concepts. The robust T-shaped steel frame is perfectly suited for table tops from a size of 1200 × 600 mm and provides a stable base for a wide range of applications – from conference and seminar rooms to training areas and multifunctional work environments.
Thanks to the practical folding mechanism, the FOLDIX T-ECON can be set up and taken down quickly. Its easy handling enables efficient use of spaces while also ensuring space-saving storage when the tables are not needed. The integrated locking system ensures secure support in both the unfolded and folded positions.
The height of the folding table frame can be flexibly adjusted between 710 and 715 mm, allowing comfortable adaptation to individual requirements. With its slim, timeless design, the table frame blends harmoniously into various room concepts and is available in the elegant finishes black and chrome.
Scope of delivery:
1 set - folding table frame - NO table top included
from
€94.90*
CCE Drop-Down Seal TOP SLIDE for Sliding Doors
CCE Drop-Down Seal TOP SLIDE for Sliding Doors
The TOP SLIDE drop-down seal from CCE was specially developed for use in wooden sliding doors and ensures reliable sealing between the door leaf and the floor. Thanks to the integrated floor rail and the innovative magnetic lock with two magnets, the seal is precisely activated when the door is closed and ensures consistently high sealing performance. This effectively reduces drafts, dust and noise and noticeably improves living comfort.
The closing force is adjusted via a retractable, adjustable spring-loaded push button and can be quickly and easily adapted to the respective installation conditions. The high-quality sealing lip made of flame-retardant silicone impresses with its durability, flexibility and reliable function even with frequent use.
Installation is carried out by milling into the wooden sliding door. A milling cut of 30 x 18 mm is required for this. The drop-down seal is suitable for a gap between door and floor of at least 5 mm up to a maximum of 15 mm and therefore offers versatile indoor applications.
With the TOP SLIDE drop-down seal from CCE, you get a durable and low-maintenance solution for a comfortable, quiet and clean-closing wooden sliding door. The precise workmanship, easy adjustment and robust silicone seal make this sealing system the ideal choice for high-quality sliding doors in private and commercial settings.
Scope of delivery:
1 piece - drop-down seal incl. floor rail & magnetic lock & screws
from
€30.90*
Ellen letter flap FELIX made of plastic, 345 x 82 mm
Ellen letter flap FELIX made of plastic, 345 x 82 mm
The FELIX letter flap from ELLEN is the ideal solution for reliably sealing letter slots on the inside of wooden front doors. The high-quality design made of robust plastic provides a durable and easy-care cover and is suitable for door openings with a cut-out of up to 290 x 65 mm. Thanks to its functional design, the letter flap blends harmoniously into a wide range of door models while also improving living comfort.
Equipped with a self-closing flap and a double brush seal, the letter flap effectively protects against dust, draughts, cold, heat, pollen, rainwater and insects. In this way, the FELIX letter flap helps improve the indoor climate, reduce energy losses and minimise the entry of unwanted environmental influences through the letter slot.
Installation is quick and straightforward by simply screwing it onto the inside of the front door. The matching fixing screws are already included in the scope of delivery, so the letter flap can be mounted immediately.
Scope of delivery:
1 piece - letter flap incl. fixing screws
from
€14.90*
Ellen letter flap KATJA made of stainless steel with flap and brush incl. screws
Ellen letter flap KATJA made of stainless steel with flap and brush incl. screws
The KATJA letter flap from Ellen is the ideal solution for clean and reliable sealing of letter slots in wooden front doors. The high-quality front flap made of stainless steel impresses with its durable quality and timeless design, while the robust substructure made of durable plastic provides additional stability. This makes the letter flap perfectly suited for long-term outdoor use.
The self-closing flap closes automatically after each delivery and, together with the densely packed brush seal, provides effective protection against external influences. Draughts, dust, cold, heat, pollen, rainwater and insects are reliably kept out, noticeably improving the indoor climate in the entrance area and increasing living comfort.
The KATJA letter flap was specially developed for letter slots on the outside of wooden front doors with a cut-out of up to 280 x 48 mm. Thanks to the simple screw-on installation, the letter slot can be fitted quickly and easily. The matching fixing screws are already included in the scope of delivery, so nothing stands in the way of quick installation.
With its combination of high-quality stainless steel, durable plastic construction and effective sealing, the KATJA letter flap from Ellen is the perfect choice for anyone who values quality, functionality and an attractive appearance.
Scope of delivery:
1 piece - letter flap incl. fixing screws
€49.90*
Siso Pivot Hinge for Room Dividers 360° Rotatable Black Matt with Spring Mechanism incl. Bearings
Siso Pivot Hinge for Room Dividers 360° Rotatable Black Matt with Spring Mechanism incl. Bearings
The louvre pivot fitting for room dividers from Siso is the ideal solution for modern, flexibly designed living and working spaces. With its invisible installation, it creates an elegant, minimalist appearance while also enabling 360° rotation of wooden room divider elements. The complete set includes a pair of pivot hinges for the top and bottom as well as the matching bearings, ensuring a stable and precise pivot function.
Installation is very simple: the pivot hinge is recessed into the wood and screwed in place so that it remains almost invisible. Thanks to the integrated spring mechanism, the room dividers can be hung in effortlessly and removed again quickly when needed. Subsequent height adjustment of the elements is also possible - ideal if the floor is not completely level or fine adjustment is required.
The set is supplied including fixing screws and can be installed either flush or surface-mounted. The Siso pivot hinge is suitable for room divider elements with a minimum thickness of 22 mm, making it particularly versatile.
Whether for living spaces, offices or shopfitting - the Siso pivot hinge for room dividers impresses with quality, functionality and an appealing design that gives your room dividers an elegant, freely rotatable solution.
Scope of delivery:
1 pair - pivot hinges (top / bottom) incl. bearings & fixing screws
€12.90*
Gedotec Ceiling Hook MARA made of stainless steel
Gedotec Coat Hook Model MARA Brushed Stainless Steel
Product Details
Gedotec Ceiling Hook Model MARA
high-quality and sturdy coat hook
with a modern and timeless design
the rust-proof hook impresses with its appealing appearance and high stability
the sturdy and robust shape offers plenty of space for hanging jackets, coats, handbags, etc.
for easy and quick installation on the ceiling, under tabletops, in coat racks, etc.
for screwing - mounting materials are included
Material: solid stainless steel
Surface: brushed matte
Dimensions:
Screw plate diameter: Ø 60 mm
Total height: 70 mm
Drill distance: 44 mm
Hook diameter: Ø 10 mm
Unit of Quantity
1 piece coat hook
€7.90*
Gedotec Coat Hook HOLY made of stainless steel, depth 42 mm
Gedotec Coat Hook HOLY made of stainless steel, depth 42 mm
The coat hook from Gedotec impresses with a modern, timeless design and high-quality workmanship. Thanks to its round rosette and elegant stainless steel look, the clothes hook blends harmoniously into a wide variety of living and furnishing styles. It is available either in classic brushed stainless steel or in a trendy matte black finish and adds stylish accents in the hallway, cloakroom, bedroom, and bathroom.
Made from solid stainless steel, this high-quality coat hook stands for durability, stability, and high load-bearing capacity. Careful workmanship makes it a reliable branded product that retains its attractive appearance even with daily use. Whether for jackets, coats, bags, towels, or accessories - the clothes hook offers versatile uses and always keeps things tidy.
The concealed wall mounting with screws ensures a particularly clean and elegant appearance, as the fixing screws remain invisible after installation. This makes the coat hook look especially high-quality and blend discreetly into any room concept.
With a hook diameter of 14 mm, a rosette diameter of 34 mm, a height of 27 mm, and a projection of 42 mm, the hook offers a compact design with high functionality. The solid stainless steel provides a pleasant feel and a permanently robust construction.
Scope of delivery:
1 piece - coat hook incl. M6 x 38 mm stud screw & wall plug
€4.90*
Krona Koblenz Door Hinge KUBICA Hybrid K2460 made of metal concealed, load capacity 60 kg
Krona Koblenz Door Hinge KUBICA Hybrid K2460 made of metal concealed, load capacity 60 kg
The KUBICA Hybrid K2460 from Krona Koblenz is a high-quality concealed door hinge for flush-mounted interior doors, furniture doors, and inward rebate doors. It combines an elegant, almost invisible appearance with high stability and precise adjustability. Thanks to its well-designed hybrid construction, the door hinge is suitable both for modern living spaces and for demanding contract applications where design and function are equally important.
With a load capacity of up to 60 kg when using two door hinges, the KUBICA Hybrid K2460 offers a reliable and durable solution for light to medium-weight door constructions. The 180° opening angle allows maximum freedom of movement and ensures comfortable access. The robust construction is designed for 200,000 test cycles and guarantees permanently precise operation even under intensive use. In addition, the door hinge impresses with high corrosion resistance, withstanding 240 hours in the salt spray test.
For exact door installation, the KUBICA Hybrid K2460 features convenient 3D adjustment. The pressure adjustment in the X-axis allows adjustment of ±3 mm, the height adjustment in the Z-axis also ±3 mm, and the depth adjustment in the Y-axis ±1.5 mm. This makes it possible to align door leaves precisely after installation and adjust them optimally in the long term. The door hinge is equipped with five pivot points and ensures smooth, even movement. With a width of 18 mm on the door side, a K dimension of 4 mm, and a maximum centered hinge thickness of 26 mm, the KUBICA Hybrid K2460 is suitable for numerous modern door constructions. The single hinge meets the door hinge classification 2 | 7 | 3 | 1 | 1 | 4 | 0 | 10. It therefore meets the high requirements for quality, load-bearing capacity, and durability in professional door construction.
The KUBICA Hybrid K2460 from Krona Koblenz is the ideal choice for anyone looking for a concealed door hinge with high load capacity, easy 3D adjustment, and modern design.
Scope of delivery:
1 piece - door hinge incl. cover caps and screws
from
€45.90*
Kesseböhmer swivel fitting TURNMOTION III, 360° rotatable
Kesseböhmer swivel fitting TURNMOTION III, 360° rotatable
With the Kesseböhmer TurnMotion III, you can turn your tall cabinet into a convenient storage wonder. The innovative swivel fitting ensures that supplies, spices, bottles and kitchen utensils are always neatly arranged and easy to reach. Thanks to the practical 360° rotation function, you can see the entire cabinet contents at a glance with just one movement. In addition, the rotating tray can be pulled forward, making even hard-to-reach areas easily accessible.
TurnMotion III offers the perfect solution for more order and convenience in the kitchen. Whether olive oil, spices, canned goods or everyday kitchen helpers - everything has its fixed place and is quickly at hand. By making optimal use of the available storage space, you create more clarity and avoid long searches in deep cabinet areas.
The sturdy construction is designed for a load of up to 20 kg and impresses with its high functionality in daily use. The raised edges and non-slip surface keep your kitchen utensils securely on the rotating tray, even with regular use. The swivel fitting is ideal for 60 cm wide tall cabinets and can be used in a variety of ways in kitchens, pantry cabinets or utility rooms.
Installation is particularly easy, as the required fastening material is already included in the scope of delivery. The high-quality swivel fitting blends unobtrusively into modern cabinet solutions and ensures convenient organisation of your storage areas.De
r Kesseböhmer TurnMotion III has a height of 66.2 mm, a depth of 481 mm and a width of 481 mm. It is suitable for cabinets with an internal width from 562 mm, an internal depth from 495 mm and an internal height from 68 mm.
Scope of delivery:
1 set - swivel fitting incl. fastening material
from
€105.99*
Rehau shower door seal made of plastic, strip seal for glass thickness 4 - 5 mm
Rehau shower door seal made of plastic, strip seal for glass thickness 4 - 5 mm
Get the reliable strip seal from REHAU, specially developed for shower doors with a glass thickness of 4 - 5 mm. This high-quality plastic sealing profile is ideal for sealing frameless showers, framed showers, bathtub screens or other sanitary partition walls. It provides effective sealing both between glass and wall and between two glass panes, especially in the hinge area.
The REHAU shower seal is distinguished by its unique crystal-clear design, achieved through the use of the high-quality RAU-PVC1107 formulation in combination with an optimally designed tool. This enables excellent transparency and an aesthetically pleasing appearance.
To improve sliding performance on glass and adjacent components, the strip seal features structured soft PVC sealing lips. These not only ensure smooth movement, but also effectively protect against mould growth, which guarantees the durability of the sealing profile.
Another advantage of this shower door seal is its high UV resistance. REHAU tests the seal extensively with the XENON TEST 1200, cycle 102/18, winding run, to ensure that it can withstand demanding requirements. Even with long-term exposure to sunlight, the seal retains its quality and colour.
Installation of this seal is very simple. It is simply pushed onto the door leaf and provides reliable sealing in the vertical area between two glass elements. It is also ideal as a spare part for Palme showers in the Drive XT, Cenit 0.11, Viteo, Piana X-Free (folding doors) and Top Drive (folding doors) series, as well as for various Artweger showers.
Scope of delivery:
1 piece - shower door seal
from
€7.50*
Gedotec Shell Handle FRANZISKA made of beech wood, 112 x 46 mm
Gedotec Shell Handle FRANZISKA made of beech wood, 112 x 46 mm
The FRANZISKA shell handle from Gedotec combines timeless design with a natural wood look and high-quality workmanship. Made from solid beech wood, the handle impresses with its warm appearance and the pleasant feel of sustainable Italian solid wood. The untreated surface offers you a wide range of design options and can be individually stained, oiled or varnished, so that the shell handle can be perfectly matched to furniture pieces and interior styles.
Thanks to the screwless fastening, the FRANZISKA shell handle is glued directly into the wood. This creates a particularly clean and elegant look without visible screws. The carefully rounded design ensures comfortable use and prevents sharp corners and edges. The handle is ideal for drawers, cabinet doors, chests of drawers and many other furniture applications in living areas, kitchens or interior fit-outs.
With its compact outer dimensions of 112 x 46 mm and a precise milling size of 105 x 40 mm, the FRANZISKA shell handle is a stylish solution for modern as well as classic furniture projects. The combination of natural beech wood, high-quality workmanship and individual finishing options makes this furniture handle a durable and versatile design element.
Scope of delivery:
1 piece - shell handle
€4.50*
Gedotec Shell Handle MIMI made of beech wood, 105 x 52 mm
Gedotec Shell Handle MIMI made of beech wood, 105 x 52 mm
The MIMI shell handle from Gedotec combines timeless design with high-quality craftsmanship and a natural look. Made from solid Italian hardwood, the handle impresses with its warm appearance and sustainable material choice. The untreated beech wood offers you numerous design possibilities and can be individually stained, oiled or lacquered, so that the shell handle can be perfectly matched to your furniture and interior style.
Thanks to the screwless fastening, the MIMI shell handle can be glued directly into the wood. This creates a particularly clean and elegant look without visible screws or fastening elements. The carefully rounded design ensures a pleasant feel and prevents sharp corners and edges - ideal for comfortable everyday use on drawers, cabinets and furniture flaps.
With its compact outer dimensions of 112 x 48 mm and a precise milling size of 105 x 41 mm, the Gedotec MIMI shell handle is ideal for both modern and classic furniture projects. Whether for restoring existing furniture or designing new pieces individually: this high-quality wooden handle adds natural accents and gives furniture a stylish, authentic character.
Scope of delivery:
1 piece - shell handle
€4.50*
Marella Furniture Handle VITRUVIO made of metal, CC 160 - 320 mm
Marella Furniture Handle VITRUVIO made of metal, CC 160 - 320 mm
The VITRUVIO furniture handle by Marella combines modern design with minimalist elegance and adds stylish accents to kitchens, living room furniture, bathroom furniture or cabinets. Its straight-lined design language is harmoniously complemented by the round grip bar and the distinctive rectangular feet. The balanced design appears timeless and high-quality at the same time and fits perfectly into modern as well as purist interior concepts.
Thanks to its clear geometry, the handle feels comfortable in the hand and ensures convenient everyday use. Whether as a stylish detail on a modern kitchen, an elegant chest of drawers or high-quality built-in cabinets – the VITRUVIO furniture handle gives every furniture front a premium and architectural look. The combination of soft curves and precise edges creates an exciting contrast that makes the handle a real eye-catcher without pushing itself into the foreground.
The Marella VITRUVIO furniture handle is available in the finishes matte black, polished chrome and polished brass. While matte black emphasizes a modern, understated character, polished chrome provides an elegant, timeless shine. The polished brass version adds warm, refined accents and is ideal for exclusive interior concepts or as a stylish contrast to dark furniture fronts.
Scope of delivery:
1 piece - furniture handle incl. mounting screws (M4 x 25 mm)
from
€9.09*
Marella furniture handle TRAMA made of metal, CC 160 - 800 mm
Marella furniture handle TRAMA made of metal, CC 160 - 800 mm
The TRAMA furniture handle by Marella combines modern design with an exceptional feel and adds stylish accents to furniture of all kinds. Designed by Marco Bortolin, the handle impresses with its clear, minimalist design language, which is uniquely enhanced by a finely structured surface. The precisely integrated relief not only gives the handle a distinctive look, but also ensures a pleasant grip. The result is a furniture handle that perfectly combines functionality and design.
Its straight-lined appearance harmonizes with a wide variety of interior styles - from modern and purist to industrial and timelessly elegant living concepts. Whether on kitchen cabinets, sideboards, dressers, wardrobes or bathroom furniture: the TRAMA furniture handle gives every front a high-quality and individual look. The structured surface in particular sets it apart from classic bar handles and makes it a real eye-catcher.
The handle is available in the high-quality finishes black matt, polished chrome and champagne. While black matt emphasizes a modern and striking character, polished chrome creates an elegant, glossy look. The champagne finish gives furniture a warm, exclusive note and fits perfectly with current interior trends.
Thanks to its high-quality workmanship and timeless design, the TRAMA furniture handle is suitable for almost any living environment. The combination of minimalist form, refined structure and durable finishes makes it the ideal choice for anyone who values quality, comfort and exceptional design.
Scope of delivery:
1 piece - furniture handle incl. fixing screws (M4 x 25 mm)
from
€10.32*
Blum Ecodrill M31.1000.01 hinge plate drilling jig
Blum drilling jig ECODRILL M31.1000.01The Blum drilling jig ECODRILL M31.1000.01 is the ideal hand tool for precise drilling of the Blum hinge drilling pattern and impresses with simple, fast and comfortable handling. Thanks to its ergonomic and compact design, it is suitable for use both in the workshop and on the construction site and supports efficient processing of a wide range of Blum fittings.The practical one-handed clamping mechanism enables quick fixing of the workpiece and makes the workflow much easier. For maximum flexibility, the ECODRILL offers convenient adjustment of the material thickness as well as precise adjustment of the drilling depth and cup distance. Side stops ensure easy setting of the standard distances or allow processing directly on the marking. The integrated stop angle supports continuous and exact hinge processing.The drilling jig is operated with a standard hand drill and also offers the option of extracting drilling chips directly. This keeps the work area clean and maintains a clear view of the workpiece.With the ECODRILL M31.1000.01, numerous Blum fittings can be processed reliably and precisely. These include CLIP top hinges with BLUMOTION, CLIP top hinges, MODUL hinges as well as the AVENTOS HF and AVENTOS HK-XS flap hinges.Scope of delivery:1 drilling jig2 dowel drills ø 8 mm1 fitting drill Ø 35 mm2 Torx bits2 spacer rings
€299.99*
Buy Furniture Fittings & Construction Hardware Online | HWT-Pro – Your Store with EU-Wide Shipping
HWT-Pro is your specialist online store for high-quality furniture and construction fittings. Whether you're a DIY enthusiast, home builder, carpenter or business – private and trade customers alike will find everything they need for their project: from furniture handles, hinges and drawer systems to door fittings, flap fittings, fixings and lighting.
Why HWT-Pro?
Since 2015 we have been delivering brand-quality products directly from our own warehouses in Austria and Germany – EU-wide, fast and reliable. Every order is personally checked and carefully packed by our team. No anonymous middlemen – just verified products and genuine service.
- ✔ Over 4 million satisfied customers
- ✔ 100-day money-back guarantee
- ✔ Purchase on invoice & many other payment methods
- ✔ Personal expert advice
- ✔ EU-wide shipping from our own warehouses in Austria & Germany
Your reliable partner for home & trade
Whether renovation, new build or professional carpentry supplies: at HWT-Pro you'll find professional products that are often unavailable in retail stores – at attractive online prices. Learn more about us: About HWT-Pro
Wir gehören zu den Gewinnern des Top Rated Company Award
Unser Dank geht an unsere Kundinnen und Kunden für die vielen hervorragenden Bewertungen!
